I have Windows 8.1 standalone updates. I want to install them automatically while installing fresh copy of windows 8.1. How?

I have downloaded Windows 8.1 standalone updates from Microsoft Download Center. I don't want them to be separately installed on Windows 8.1 Copy. I want to keep the updates somewhere in Windows 8.1 setup USB/DVD so that while installing using that USB/DVD,
the updates should be automatically installed.

Hi,
Operating system package-servicing commands can be used offline to install, remove, or update Windows® packages provided as cabinet (.cab) or Windows Update Stand-alone Installer (.msu) files.
Dism /Image:C:\test\offline /LogPath:AddPackage.log /Add-Package /PackagePath:C:\packages\package.msu
Details you can refer to:
DISM Operating System Package Servicing Command-Line Options
http://technet.microsoft.com/en-us/library/hh825265.aspx
Kate Li
TechNet Community Support

Similar Messages

I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

Try throwing it into recovery mode and starting over.
http://support.apple.com/kb/ht4097

I have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3

i have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3. i am not able to install acrobat it is showing folowing error. my email id is [email protected]
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW024, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW065: Display requirements not met for {0327A4BF-62BF-48BB-8928-B971B749E9E1} Creative Suite 6 Design Standard 6.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Rizwan,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

Hello, I've just purchase a mac mini 10.9 it doest have a cd drive and so I can't install my Photoshop Elements 4.0. How can I update/upgrade Adobe and in stall in my computer?

Hello, I've just purchase a mac mini 10.9 it doest have a cd drive and so I can't install my Photoshop Elements 4.0. How can I update/upgrade Adobe and in stall in my computer?

that's no longer available for download. in addition, it's unlikely it would work on your mavericks os.
you could purchase pse 12 upgrade, Adobe Photoshop Elements 12 - Buying guide

I have purchased Lightroom 5 for my window computer. I have just purchased an Apple Mac and want to install it there also but Adobe won't accept my existing Lightroom key

I have purchased Lightroom 5 for my window computer. I have just purchased an Apple Mac and want to install it there also but Adobe won't accept my existing Lightroom key

KRupani wrote:
Hi bertalan,
The Lightroom windows serial key will not work with the Mac as the these serial keys are platform specific.
Thanks
Kapil
The Lightroom serial number is cross-platform. It works on both Windows and Mac.
Something else is going on here.

I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!

Movies are not bought via Netflix, then are rented or borrowed.
For iTunes account issues, contact iTunes Customer Support.

Office SP1 installed, but superceded Lync update still wants to install

Hello all, I had the same question in the SCCM forum and they told me to repost the same question here. So my machine is Windows 7 Enterprise SP1 x64 running newly downloaded Office 2013 ProPlus w/ SP1 direct from MS. I did not install the SP1
myself, I used the complete ISO off the volume license center that includes SP1. Loaded the updated OCT files from
http://www.microsoft.com/en-us/download/details.aspx?id=35554 to fix the install glitch as is documented. Installed with customized OCT msp file.
I installed my updates deployed via SCCM 2012 R2 CU1, using all office 2013 updates, not expired or superseded. I installed all of my published/deployed updates, but when running updates through Microsoft Update using Online, I see
Update for Microsoft Lync 2013 (KB2817678) 32-bit Edition as an update that is needed. I check and this update
IS SUPERSEDED by the SP1 (
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2850036 ).
That made me question do I actually have Office 2013 SP1 installed. Checked the version number as documented "In order to determine whether SP1 is already installed, you can look for the program version in the list of installed programs
in the Programs and Features Control Panel item. If SP1 is installed, the version will be 15.0.4569.1506 or higher."
Mine shows, "15.0.4569.1506" so it is installed.
Now that you have the background, why is it asking me to install an update SP1 supersedes when I have SP1 installed?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

Reposted the question in the Office 2013 forums...
http://social.technet.microsoft.com/Forums/en-US/0994f4d7-d04c-4266-9272-cb4ed127400b/office-sp1-installed-but-superceded-lync-update-still-wants-to-install?forum=officeitpro
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

Remove windows Installation from Old WD hard drive and Install Fresh Copy on the New One.

Hi Community! I just bought a new WD Blue 1 TB hard drive, my old hard drive is WD Blue caviar 500 GB, running on Windows 7 ultimate 32 bit.
There are two things I wish to do: 1. Firstly, if it's possible, I would like to copy some videos, images, music etc. from my OLD Drive to the new one.
Please note that, I don't have an external disk to do it, I know that would've been less complicated, but that's not an option at this point. 2. Secondly, once that is done, if possible, I want to remove windows 7 installation from my old hard drive, re-partition it to make it just the storage drive, and finally install
fresh copy of windows 7- 64 bit to the new Hard drive.
Please note that, my old Hard drive is installed on windows 7- 32 bit and now I want to install a fresh copy of Windows 7-64bit instead of 32bit, because I am upgrading my
configuration with better ones.
I am adding 4 GB corsair vengeance ram to my 2 GB corsair ram, so that is 6 GB in total.
I am adding 1 TB hard disk to my 500 GB Hard disk, so that is 1500 GB.
Both my processor and mother board supports 64 bit.
Intel® Pentium® Processor G2020 (3M Cache, 2.90 GHz) And this Mother board - "Biostar H61MGV3"I know that you could clone the partition and migrate the installation from one hard drive to another using the Acronis True Image WD Edition Software, but I don't want that.
In simple words, say I have a dos computer, I installed my 1TB WD hard drive, installed a fresh copy of windows 7-64bit. So my computer is up and running. Now, I have another hard
drive which I wish to use, that is 500GB WD, but it has Windows 7-32 bit installed in it.
So what I want to do is, make this old hard drive a complete 500 gb storage device and remove the windows installation from it, without loosing music, videos, etc. and then lastly
copying the music and other media to the new hard drive, and formatting it completely.
I am perhaps making this very complicated, I know you would have better easier solution for this.
I am frustrated, your help would be appreciated, thanks a lot. Sincerely, Abe

Since you don't want to clone the drive (I agree with you), you can just swap drives and install Windows on the new drive. Windows won't complain that you are installing on a different drive because it only cares if you change more than one piece of hardware at a time. The problem will arise when you copy the files from the old drive because you cannot just connect it via SATA. That would confuse Windows, as both installations were run on that hardware. You need to mount it in an external dock via USB 2.0/3.0 which will isolate the details of the OS. After you copy all necessary files, you can use WDC Lifeguard to write zeros to the entire disk and then create a new partition. After that you can mount it via SATA because it will be a new drive. Do NOT be in a hurry to wipe the drive however, as you don't want to forget something.

I have two (paid) copies of lightroom 5 from your photography promotion installed (on two different machines). I would like to deactivate one copy on one desktop so I can install a copy on my laptop. How do I go about this?

I have two (paid) copies of lightroom 5 from your photography promotion installed (on two different machines). I would like to deactivate one copy on one desktop so I can install a copy on my laptop. How do I go about this?

While the standalone version of LR has no deactivation, the Photography Program which is LR + PS-CC bundled and licensed through the Cloud will have a 2-activation limit per Adobe ID, and you cannot decouple the LR from the PS-CC in the Photographers Bundle.
You can license the cloud on up to two computers per AdobeID by signing into the cloud. When you try to sign in on a third computer you have the option to deactivate the other two copies, which you can do, and then never sign into the cloud on the one computer you don’t want activated and you’ll be fine.

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT1349 I have two Apple itunes accounts and I want to merge them in to one.

I have two Apple itunes accounts and I want to merge them in to one. How do I do this.

You cannot merge Apple ID's. Copied from Apple's FAQ about Apple ID's.
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
http://support.apple.com/kb/HE37

HT6012 I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account. How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 1

I had uninstalled iMovie 10 after it was updated and decided to reinstall it but it won't update, iMovie 10 update is stuck at installed in my App Store account. How do I get it the update to revert to uninstalled so I can re-update iMovie 10 to 10.0.1? iMovie 9.0.9 (iLife 11) is still installed and working.

What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.

Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only load

I bought a new iMac and want to install my copy of CS3 on it. Currently, I have photoshop only loaded on an older G4. After installing the discs I tried to enter the serial number and an alert said the serial was already used. I did have CS3 loaded on a 2007 imac but after the harddrive died it is no longer installed. Can you help?
Allen

to reset your activation count, contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

I have a new canon pixma printer and want to install it on my macbook air without a cd

please help i have a new canon pixma printer and want to install it on my macbook air but it doesnt have a cd driver

Here is the printer setup guide.
http://support.apple.com/kb/PH14143

TS1702 hi..i have app on my laptop,so i want to install them on my iphone 4s problem!!

hi..i have app on my laptop,so i want to install them on my iphone 4s,with itunes but when i install any app at itunes it is say ''SOME OF THE APPS IN YOUR I TUNES WERE NOT INSTALLED ON THE IPHONE BECAUSE ONE OR MORE ERRORS OCCURRED''

If you upgrade to Lion it comes bundeled with it!
To get it on your Mac Pro just copy the aplication from the aplication folder on your MacBook. You can do this via a thumb drive or over a local network connection.

I have Windows 8.1 standalone updates. I want to install them automatically while installing fresh copy of windows 8.1. How?

Similar Messages

Maybe you are looking for