I have Windows XP and the latest Itunes and Itunes does not recognize my Iphone 4

I have tried all of the trouble shooting ideas. I have installed and reinstalled Itunes. I have restarted my phone. I have restarted the computer. I have gone into MSCONFIG and made sure that all of the Iphone type services were ON. Nothing. My computer sees another camera and nothing more. My cable is fine. My USB ports are fine. I have searched and searched for a solution to absolutely NO avail. Anyone have any ideas?

iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X

Similar Messages

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR. Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that: http://labs.adobe.com/
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

ITunes 10.0 does not recognize my iPhone under my main user name

iTunes 10.0 doesn't recognize my iPhone when I am logged in under my main user name. It also freezes frequently and takes a very, very long time to open (it does recognize my iPod). However, if I log in as a different user, iTunes works fine; it recognizes my iPhone right away, opens quickly and doesn't freeze.
All of my important stuff is stored under my main user name so I need to get iTunes to work when I am logged in under that. I have all administrator privileges/access.
Does anyone know what this means and what, if anything, I can do to fix it? I have uninstalled/reinstalled iTunes multiple times, checked the USB ports, updated software, drivers and everything else Apple recommends.

Care to share which OS you are using?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Did you restart your computer?

ITunes 10.1 does not recognize my iPhone 3G anymore (0xE800000A)

I have participated to another question in this forum that I believe had a similar if not same question:
I have recently tried to connect my iPhone 3G to iTunes (v. 10.1) in order to update it to iOS4.2 and sync some music. When I connected the phone, the following error message appeared:
'iTunes could not connect to this iPhone because an unknown error occurred (0xE800000A).'
Ever since I have searched for solutions and I am not even sure that the error fully relates to iTunes as all the other comments I found in other threats were talking about 'USB bus issues' and 'Apple Remote Devices' that then again do not seem to apply to my problem either. All my USB ports work just fine and the cable connecting the phone with the computer is good as well (my iPod is using the same cable and is recognized).
Another user suggested downloading and installing the iOS4.2.sdk, which I now downloaded but cannot open because it is 'not recognized'. I wonder whether this relates to the same issue or whether I should need to install that package in a special location (I am the main user of the computer with all admin rights and have never seen any disk images not being recognized...)?
I am frankly a bit at a loss now. Not that I urgently need to upgrade my software for the phone and also music syncing is not that important right now but I would like to know what causes it and if there is ever going to be a solution for it.
Actually, for one: is there a possibility to re-install an earlier version of iTunes? When following the suggestions on the help pages, I completely uninstalled iTunes and reinstalled it but the problem still persisted (even with restarts between the steps). I do believe that this all started when I actually upgraded iTunes to 10.1. I synced the phone just fine before and the next time I connected it I had upgraded iTunes to the newest version and now synchronization does not work anymore.
Anyone any tips?
Thank you so much in advance.

Yikes! I just had the exact same problem, but thankfully found a better solution.
This may have been added since you had your problem, but the very very last last thing on this support page finally fixed my problem http://support.apple.com/kb/TS3221 :
1. Disconnect all iOS devices from your computer, and quit iTunes.
2. From the Finder, choose Go > Go to folder.
3. Type the following and press then Return:
/var/db/lockdown
4. The Finder window should display one or more files with long alphanumeric file names.
5. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted to.
Note: Do not delete the lockdown folder itself. Only delete the files contained inside the lockdown folder.
6. Reconnect your iOS device and open iTunes.
Most of the search results I found for this error were on Windows--frustrating. This is the only Mac solution I found that actually worked.
I'm guessing the /var/db/lockdown directory isn't restored in a Time Machine backup, so that's why your wipe fixed it.

Apple TV and the latest version of iTunes 7.7 appears to have a bug...

I have an Apple TV which displayed all artists albums in the relevant album filter prior to the latest release of iTunes 7.7. Since this release although Itunes is still fine on my laptop it no longer displays all albums under the artists filter which means I can only locate an artists album by using the album filter (which takes a lot longer if you cant rememember the name of the album but only the artist). I was wondering if anyone elese has come across this issue and if its a known bug between Apple TV and the latest version of ITunes?
I have tried reinstalling ITunes on my Apple TV from scratch (by making the Apple TV revert to factory settings and then reinstalling ITunes) but still no joy... any ideas?

I'm not saying you haven't looked, but for the avoidance of doubt have you actually checked that the 'Part of a compilation' checkbox under the 'info' tab of the 'get info' window isn't checked.
Under the new software, tunes that have this box checked are removed from the tv artist listings and placed under the tv compilations listing and referenced by album. Their listing under the tv albums list hasn't changed.

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

TS3694 I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - Runtime Error! R6034 & itunes will not open I have tried re installing but it is the same

I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

What does the error message say when you install iTunes and it fails?
This post was edited by Malignance

How do I delete files on my iPod second gen? This is a NEW problem I have only had with the latest version of iTunes. I have not changed libraries.

How do I delete files on my iPod second gen? This is a NEW problem I have only had with the latest version of iTunes. I have not changed libraries. All files are grayed out. I have already read related posts in the iTunes community.

Thanks but I had already read this, and it was no help at all. Under the Summary tab, "Options", there is no check-box to manually manage my stuff. I suspect this is because it is a 2nd gen iPod, with ONLY manual management. The only way to delete my stuff seems to be to reset the entire device.
I like to listen to podcasts. What is particularly frustrating is that the 4th gen shuffle CANNOT play podcasts, but ONLY music, which I discovered after a lot of research and multiple visits to an Apple store. So I have to resort to an older version of the shuffle to play podcasts And now with the latest version of iTunes there seems to be no way to delete any podcasts on the older version. Apple just makes it harder and harder for us podcast-lovers, driving us away from Apple -- driving me away from the entire brand and from ALL Apple devices, not just iPod.

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

TS1538 iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs

iphone wont recognize in itunes. it's got the latest software update and the latest version of itunes on the computer. the phone works as normal but i want to restore it but can't because i can only get the the recovery mode stage and then it needs itunes???

Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Hello. I have an Ipod Touch (The Latest one) and the it is stuck on the Apple Logo

I have an Ipod Touch (The Latest one) and the it is stuck on the Apple Logo.
P.S My lock button is stuck sadly.
Thanks!

You will need to get it serviced. You need that Sleep/Wake button working to try a Reset.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I think you're using a Lion developer version. Open  > About this Mac > More Info, and copy Software here. Did you purchase Lion in the App Store?

The latest version of Pages does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window?

The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window? As Pages templates cannot be ordered in folders, my many templates are effectively unusable now and I need to find another way to order and access them.

Are you aware of that you can still use Pages 09 on Mavericks? You don't have to go thru the grieves of using the crippled Pages 5. Pages 09 should bi in Applications/iWork 09 folder.

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538

I have Windows XP and the latest Itunes and Itunes does not recognize my Iphone 4

Similar Messages

Maybe you are looking for