I have X on my battery what does that mean and how can I fix it ?
every time I take the charger out it shut down on me !!
maybe some help here.
http://support.apple.com/kb/HT1119
Similar Messages
-
I have a G62-3M-300 Notebook computer and I am getting the error message above. I also get a messgae that says error NTFP and a disk check for consisentcy cannot be run. What can I do to resolve this issue?
Hi,
Please use the following instructions to fix:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/one-of-your-disks-needs-to-be-ch...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I keep getting this message " the maximum number of free accounts have been activated on this iPad " what does that mean and how can I fix it
It's a really bad idea to post your iPhone's serial number and I've asked the Hosts to remove it.
Any one device can create only three iCloud accounts. As you have apparently already created three accounts (or if it's a used phone the previous owner did) you cannot create any more one it. This is tied to the hardware, not the account, and there is no way round it.
You can create a new iCloud account on another iOS device or on a Mac, and then you will be able to sign into that on your iPhone. -
I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?
what movie editing software are you using?
-
When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?
I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here. -
Every time I open a browser, I get a "not responding" after the Mozilla Firefox heading. What does this mean and how can I fix it?
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Every time I try to update my 3g iPhone I get the same result and it ends in (-1). I tried researching to see if anyone else had this problem but nothing came up. What does the (-1) mean and how can I fix it?
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Here's a link to the complete error code page:
Resolve iOS update and restore errors - Apple Support -
I am abroad for the summer and there is no internet available. I purchased a hotspot in a nearby vodaphone and they helped me connect the Ipad to the hotspot. I assumed I would have no trouble after that. Once I got home though and connected to the hotspot i found i could not open the internet without getting a notice about not connecting to the server. I have a signal and can connect to the hotspot and yet i get no internet. I already spent 50 euro on the hotspot for 2 months of wifi...is there a way to actually fix the problem without me having to spend more money?
I'm guessing e mail does not work either. While the pad is seeing the network, it is not yet connecting, probably trying to work through your security set up. I suggest you go to settings, then network, then the details of the network. Do you see an ip address that starts with 192.168.1. Then some number? If not, the router has not made friends with the pad.
Suggest that from that same screen, you select 'forget this network'. Then start over again, paying close attention to what happens when you provide the security password. -
My ipod says it cannot be used because the apple mobile device service is not started? please someone tell me they know how to fix this.
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
the app store is saying that my ID is disabled. i made a new one and still the same thing. help!?
http://www.apple.com/support/contact/
-
Just got the 4S. I cannot get Siri to work. It says it cannot retrieve info from the server. What does that mean and how can I fix it to use it?
Siri always contacts her own server at apple. They may be performing maintenance or applying updates, should be back soon.
-
I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
My projects icons turned to orange in Aperture? I must have pressed a button without noticing it. What does that mean, and how can I get them back to normal?
My projects icons turned to orange in Aperture?
Ana Candano, what is your Aperture version? Earlier Aperture versions - until Aperture 3.2.4 had colored icons, Aperture 3.3 and later are gray in gray. Do you have two versions of Aperture installed?
When you post back, list your version of MacOS X and the versions of any Aperture.app you can find with Spotlight on your Mac.
Frank, the thread you pointed to, was a different question, but probably is related. It would be good to know how it has been resolved. -
My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?
I am getting the same error message. Have you figured it out?
Maybe you are looking for
-
Hello i found an old mac mini today for $100 at this local elec. shop... But i'm on the road with my laptop and no other external monitor.... Is there a quick and easy (no $$) way to hook it up and view/operate it's desktop on my laptop...?? Help...
-
BTCUSTOMERH fields in Problem (SM 7.1 SP10)
Hello experts! I have SM 7.1 SP10. I created Z fields in BTCUSTOMERH of Incident using AET. I want to add created BTCUSTOMERH fields in Problem document, but this BTCUSTOMERH fields are not present in Context: How to add BTCUSTOMERH to AIC_PROBLEM_H?
-
hi, i have a question: i want to set an ejb env entry value to </a>. in the ejb-jar.xml i wrap it into <![CDATA[</a>]]>, and it works. In the console the pure string </a> appears. as i want to edit it to <a>x</a> i receive an exception, wouldn't it b
-
ref: 5719544#5719544 I can still find no obvious way to continue a conversation thread with Patty F. The screen with the latest question and answer doesn't seem to have a follow-up question link. I'm after some old albums that were on photoshop.com a
-
AGD/GDA datum conversions in Oracle 8.1.7
Dan and/or Oracle Spatial development team, Australia has changed its datum for its national coordinate systems from AGD66/AGD84 to GDA94. Thus we have gone from a pre-satellite customised datum to a geocentric datum. I am planning for the conversion