I having problems in using layers. I need to combine six pictures in one. Please help!
I have 6 pictures that I need to combine in one.
if1996 wrote:
I have 6 pictures that I need to combine in one.
if1996,
I am assuming that you wish to place these pictures on one background as a collage, and that your paper stock is 8.5"x11".
Ideally, these 6 pictures will have the same resolution. You can check this via Image>resize>image size. It is expressed in px/in. The rule of thumb is that for printing, the resolution should be in 240-300px/in range
Do the math so that the 6 pictures will fit on to the canvas - perhaps some are in landscape orientation, some portrait.
If you need to crop a picture(s) to a specific size, use the crop tool (on a duplicate picture).
If you are with me so far, try the following:
Go to File>new>blank file, enter width& height of the paper, and resolution the same value as that of the pictures or as close as possible., background color to suit
Open picture A, go to Select>all, go to Edit>copy to place it on the clipboard
Go back to the blank file, then Edit>paste
Use the move tool to position picture A, and to resize it with the corner handles of the bounding box, if necessary
Repeat steps 2-4 for pictures B,C,D,E,F.
You should have 7 layers: Background (the canvas) and 6 layers with the pictures. No doubt you will have to adjust the position of the pictures - just activate the appropriate layer, and use the move tool.
For orientation, it is very helpful to have the grid open (View>grid). This will not print.
Similar Messages
-
Problems with using highlighting feature in iBooks after updating to ios8. Please help.
Having problems with highlighting feature in iBooks after updating ios8 to my iPad. Please help!
I Too am having problems with iBooks highlighting the entire chapter if I touch the right edge of a page. It overrides my previous highlighting making my studying useles. It's terribly frustrating! iOS 8 has been a big,big problem. Apple has to fix this. There should be a way to undo it. It's a terrible mess.
-
I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))
i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
mosesThose who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."
-
I am having problem with using the Basic brush definition
I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)
for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.
-
I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!
A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
i have 10.5.8 and i'd like to update to Lion but I haven't the app store avaiable to my sistem and I can find the atualization. At the software update doesn't have any atualization... I updated my iphone4 to IOS5 and having problems to use ICloud
As Retired Engineer indicated, you will need to install Snow Leopard first. After you install Snow Leopard, you need to go into Software Update and perform the updates. 10.6.6 will install the App Store. You should continue to update to 10.6.8 before purchasing and installing Lion from the App Store.
Be sure your machine meets the minimum requirements. Basically, any Mac with a Core 2 Duo processor or later and at least 2GB of RAM (but 4 is highly recommended). If you have a first generation MacBook Pro with a Core Duo, you will not be able to upgrade to Lion. -
Having problem in using RUN_PRODUCT in oracle apps 11.0.3
I am having problem in using RUN_PRODUCT in oracle apps 11.0.3. Error in oracle apps is
FRM-40733 PL/SQL built-in RUN_PRODUCT failed
What could be the possible cause for this error ?Hi again;
I found this please also check this:
Price List Migration from 11.0.3 to 11.5.10/R12.
Regard
Helios -
I am having problem with using my Basic brush definition
I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)
Basic is not a brush, only a starting point for you to make a brush. Load the real brush you want before beginning to draw.
-
safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!
I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.
-
I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation
i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate
This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions -
Having problems with using shift alt command when using the square tool
having problems with using shift alt command when using the square tool
Marco,
If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software. -
How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators. -
I got a problem in my ipad2 due to "icloud backup message". I can't open my unit and am worried that I can not use my ipad anymore. What can I do. Please help me. Thank you & GOD BLESS!
Try to reset it. just press hold the on/off botton (ignore the red slider) just hold it then the ipad is automatically reset. dont worry about your file, there nothing happen to it. Godbless.
-
I am having problems pairing my Galaxy s2 with my Ipad 4.. Can some help please..
I am having problems pairing my cell Galaxy S2 to my IPAD4? .. any one please help Thank you
The iPad Bluetooth is mainly for earplugs, earphone, speakers and keyboard.
It will not paired with your Samsung.
Maybe you are looking for
-
Mini DisplayPort to VGA blurred
I'm using an early 2012 MacBook Pro 13 inch with a ViewSonic VG2230wm monitor using a Mini DisplayPort to VGA adapter plugged into the Thunderbolt port. The resolution of the external monitor is set to 1680 x 1050 which is the recommended but the qua
-
Report with EAN/UPC by article/vendor
We are looking for a report of EAN/UPC numbers by article. We would like to be able to select by Article, Vendor and/or Merchandise Category. If there are multiple EAN/UPCs by vendor, each should be listed with it's category. Although I could write
-
How to turn on video on ipad to see the show on tv using av cable
I purchased the iPad AV composite cable. The sound is coming through but there is no picture. The instruction manual says to make sure that video is turned on on the iPad so that the video will come through. However, it does not say where to find
-
Compatibility Issue with Cakewalk Sonar?
I thought, at first, that it was a mere glitch, but it has happened several times. After finishing an edit session in Premiere (Pro, CS5) I exit and open Cakewalk Sonar X2. Both are 64-bit apps and are being run in Windows 7 64-bit. Cakewalk hang
-
I really need iCloud to work with 10.6
I guess i am yet another Apple user for over 20 years being loyal to the products and purchased quite a lot of them including several rounds of Laptops and every iPhone out there. Now i was also using my .mac account with later turned into mobileme..