I having trouble installing device driver ref. cd's on windows XP 64 bit OS

I recently purchased labVIEW 8.2.1 and the sound and vibration toolkit. The DAQ unit I have is the ni-9233USB. I 've got a couple of options as far as computers that I can load the software onto. The computer that I would like to use is my laptop, but I have the windows XP 64-bit operating system. LabView seemed to install fine, but when I try to install the device driver reference cd's, it tells me they are uncompatible with the 64 bit OS. I was curious if NI had driver cd's or a solution that is compatible with the 64 bit OS?
Thanks

Hi,
Windows XP 64-bit is not a supported OS for the drivers and while LabVIEW may install it's actually not supported either. Vista 64 bit is supported, and you'll want to make sure to be using the most recent version of DAQmx (v 8.5) as well as LabVIEW 8.2.1.
Hope this helps,
Andrew S
National Instruments
Getting Started with NI-DAQmx
Measurement Fundamentals

Similar Messages

Having trouble installing your driver update....

If the driver just crashed reset your driver before trying to update or it won't work and after 30 minutes researching the problem you will feel incredibly dumb

>>Posting Guide<<

Having trouble installing photoshop elements and premier on my windows 7 laptop?

I can not install photoshop elememts or premier 11 on my windows 7 laptop?

Doesn't matter if you got it on disk or downloaded.
You've purchased a serial number and, in your case, got a disc and box as added extras.
You can always download the trial version from the Adobe website with any browser and activate that with your serial number.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
See also
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Trouble installing iTunes 10.7 or later on Windows XP.

I'm having trouble installing iTunes 10.7 or later on Windows XP. It always says "There is a problem with this Windows installer package. A program required for this install to complete could not be run." I downloaded the iTunes from the Apple site. Can anyone help me?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

I am having trouble installing a Roland UM-One driver that is supposed to be compatible with this OS (10.7.1). Any suggestions?

I am having trouble installing a Roland UM-One midi interface driver that is supposed to be compatible with this OS (10.7.2). Any suggestions?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

I am having trouble installing Lion on a partitioned hard drive. Help?

Aloha:
I am having trouble installing Lion on a partitioned hard drive
I have three internal HD's The first I am running the system on 10.6.8 (which is up to date) , the second I do most of my work on and the third I have partitioned into two and I am trying to install Lion on one of the patitions.
But Lion has decided it will only go on the first HD.
Above is the one I want to put it on, but it's not available and I can't change the partition scheme. None of the things the directions state are usable??
What might I be doing wrong?
Thanks
Dan Page

Thanks again for a rapid responce.
I finally got lion on one partition and my daily "SilverKeeper" backup on the other.
Since the only thing I had on the two partition Hard drive was the back up and since the backup would get put on tonight any way I changed the drive to no partitions. This gave me the ability to choose the GUID option, which I did and then I installed two partitions and successfuly istalled Lion on one of them. I even tied Lion into the iCloud successfuly.
But I am not out of the woods yet! I brought My brand new iPad to lunch and was informed that my iPad was synced to my Lion at home and I was on the cloud. That blew my mind, I was impressed.
I then read the Daily news with out problem, however, when I shut down my iPad, that was all she wrote. I can not get the iPad back on. The best I could do was see the revolving gear start and then freeze. It's on charge now and I can not even get rid of the frozen gear.
Not sure this all has anything to do with the recent installation on my main computer, but it's mighty suspicious.
Need some help!!
Thanks
Dan

Having trouble installing an HDD.

Just bought a Seagate 7200.8 HDD from Fry's and am having trouble installing it. The drive is SATA.
I've enabled the SATA in bios and also enabled the SATA DMA transfer. I put the drive in and Windows detects it. It shows up in device manager under the disk drives setting. However it does not show up under My Computer so that I can format it. Also the safely remove hardware icon is appering in my system tray for the HDD. I am completely confused.
This is my first SATA drive install so I don't know if i missed a step or did something wrong.
It appears in the bios on IDE channel 4.
One thing I am not sure about is in device manager under the general tab for the drive it's location is listed as "Location 0 (Secondary ATA Channel) which I know cannot be right. That is where my DVD burner is on my second IDE channel.
I am totally lost.
Anybody have any idea what is messing me up.
Thanks in advance.

In the properties of the Taskbar. Right Click in the Taskbar, choose properties then click in Hide inactive icons so it be ticked the click in the Customize button search for the Safely Remove Hardware icon and choose Always Hide from the Dropdown list....that's it.
PS: Np...You're always welcome...
Be well....

Having trouble installing Arch Linux to USB key

Hello,
I have read the wiki article, but it doesn't answer my question. I am having trouble installing Arch to a USB key (8GB Sandisk Cruzer). I installled GRUB correctly, it booted, but the flash drive was write-protected. In the fstab file, I have the defaults and noatime flags in there. I have never experienced an error like this, and I don't know how to fix it. I have tried to reboot into the Arch CD and mounted the USB, but it just stalls and displays no output. Obviously, if I boot into my USB (you can still boot into it), and do "nano /etc/fstab", it says that I cannot write. In case you were wondering, I am using the root user. Thank you for all your help!
EDIT: I have Syslinux, the kernel parameters is RW. If I run mount -o remount,rw /dev/sda1, it tells me something like:
ata3.00: status: {DRDY ERR}
ata3.00: error: {IDNF}
end_request: I/O error, dev sda, sector 21
Buffer I/o error on device sda1, logical block 0
EXT4-fs error (device sda1): ext4_remount:4665: Abort forced by user
I did NOT hit CTRL+C.
Last edited by aqua123 (2013-09-07 02:01:30)

I'm a nub, and I think I'll piggy back of aqua's post. Perhaps we have the same problem
I have an Asus UX31A with Xubuntu (with grub) currently installed. I created the bootable USB as per the Arch Wiki UEFI bootable usb page. I can boot into the main prompt where you can choose "Arch Linux Iso", "shell v1", "shell v2" and "Default prompt."
Choosing the first option (to get to the the command prompt and begin installing) makes the screen flash once, then just hangs black. Before the flash I think I see three text lines in the upper left corner, but they flash so fast I can't read them.
Choosing either of the shell options presents the error:
"Error loading \EFI\shellx64_v1.efi: Unsupported" (replace "v1" with "v2" for the other option)
Any thoughts?

Having trouble installing Photoshop Elements 13. [was: I wonder if somehow I might have went to Creative cloud because something crossed my screen, but I am not used to doing this so]

I could really use Customer Service help. I received Photoshop Elements as a gift for Christmas...I waiting until i got a new laptop so that I could use that as i was having trouble with older computer. However, I am having trouble installing the software...I swear the dvd added the programs, and I saw them in files explorer i think, but then I cannot find or I was not even able to add the serial number to my knowledge, because it was blank...no keystrokes were shown...and i don't see the program anywhere...Could I have down something wrong and it is somewhere in the cloud?

Thank you. That's what I first thought that I didn't need to do anything
but install from the dvd drive. However after the agreement, it asks me to
sign in at adobe. (Sorry, I'm a little tired of looking at this right
now)...I'll try again tomorrow.
There is no one that I see how to start using the program as I must sign
in. However, I have never been able to get the number to your firm. Or get
the correct number... I think I clicked on a learning tutorial or browsed
Adobe's website to learn more, but got caught up in all the details.
I never uninstalled virus protection to run it because I thought that it
would ask. I'll try again tomorrow I am frustrated. Thank you for your
patience. I appreciate it totally. It's really sad cause I really wanted to
create. I have wanted this for a very long time and I can't believe how
difficult this has been. It would be really nice to know what is really
wrong. I must not be seeing something or I've done something.
On Mon, Apr 6, 2015 at 10:08 PM, Ned Murphy <[email protected]>

I'm having trouble installing adobe flash player on my Kindle HD

Hi my name is Derek in I'm having trouble installing adobe flash player for Kindle HD could you please help me.

Dj5263 wrote:
Hi my name is Derek in I'm having trouble installing adobe flash player for Kindle HD could you please help me.
You'll continue to have trouble, because...
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store.
These browsers use "server side" rendering to reduce the load on your device.

I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

I am having trouble installing lightroom 5 with this error message:
Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
what should I do? Billmeb

Hi BillMeb,
Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
Regards,
Romit Sinha

Having trouble installing CS5.5 on lion 10.7.3?

Are you having trouble installing CS5.5 on your mac (os lion 10.7.3)? Are you tired of receiving error reports (i recieved "exit code: 24" numerous times)? there is an easy way without hacking your mac into bits. start your comouter in security mode (hold down the shift key while your mac boots). Pop the CS5.5 Application 1 dvd into the drive and follow the instructions. no problems. no exit codes. no hassel. no swearwords. just an installation that works. why this is necessary is a mystery to me. but it works. after installing, don't forget to restart your mac in order to exit of security modus and return to normality;)
i hope this helps a few lost souls like me who have wasted hours of their time over the past couple of days. correct me if i'm wrong, but aren't updates suppose to make things work better?

Hi..
You can disable the Lion resume feature.
Open System Preferences > General
Deselect:   Restore windows when quitting and re-opening apps
As for Facebook, select "Keep me logged in" ..   even if the page refreshes, you should stay logged in.
Click on the image once to enlarge.
For help to avoid Safari from auto refreshing pages, go to   ~/Library/Caches/com.apple.Safari/Cache.db
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
Move the Cache.db file to the Trash. Quit then relaunch Safari.

I'm having trouble installing Adobe Flash Player. Get a failure to initialize message. can you help

I'm having trouble installing Adobe Flasher Player. When I try I get a failure to initialize message. How do I initialize it?

Dj5263 wrote:
Hi my name is Derek in I'm having trouble installing adobe flash player for Kindle HD could you please help me.
You'll continue to have trouble, because...
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store.
These browsers use "server side" rendering to reduce the load on your device.

I having trouble installing device driver ref. cd's on windows XP 64 bit OS

Similar Messages

Maybe you are looking for