I heard their are problems updating your mac os x lion to 10.7.3 can anyone help me
is their a problem and if their isnt can anyone tell me if they had problems with it
I believe the problem was with the delta update. But with the combo update the problems that people were having should no longer be an issue.
If you are still having problems, I believe the fix is to install the combo update on top of your current installation of 10.7.3.
thazan wrote:
i am unable to send or receive email after updating to 10.7.3 Does any one share this problem?
Try repairing and verifying permissions. While I am not sure if this will resolve your problem, it doesn't hurt, and I would do this every time you update your computer.
Similar Messages
-
I am having problems accessing my airport utilities, the area which allows me to alter settings is all greyed out. Can anyone help?
Using the same Ethernet cable that is used to connect the modem to the AirPort Extreme, disconnect the Ethernet cable from the AirPort Extreme and connect it directly to your Mac as a test for 4-6 hours.
Be sure to power off the modem for 5-10 minutes when you do this, so that it will associate with the new device that it "sees".
Does the connection drop when you connect this way? If yes, then replace the Ethernet cable and run the test again for 4-6 hours.
If the connection still drops, you likely have a defective modem or a line problem on the cable service....despite what the cable company might say.
If the connection remains solid when you run the "test", then you know that the modem and Ethernet cable are working correctly.
If you have performed a factory default reset on the AirPort Extreme a few times, and connection still drops, then you should take the AirPort to an Apple Store....if you have one near you..... to let them take a look, or contact Apple Support directly.
http://www.apple.com/support/contact/ -
Hi I am trying to uninstall a previous version of itunes or download a newer version and I get the following error message "The feature you are trying to use is on a network resource that is unavailable" can anyone help please?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hello find my mac displays offline when I'm using the actual mac I want to find at the time, can anyone help?, Hello find my mac displays offline when I'm using the actual mac I want to find at the time, can anyone help?
Welcome to the Apple community.
Is your Mac connected to the network via ethernet. Mac's thatareI connected via ethernet cannot be located using "find my phone". -
I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone help.
You are under warranty. You can call Applecare and get advice from the tech rep, or you can bring it to an Apple store or authorized Apple service provider.
-
I have a macbook pro with mountain lion and now so I can not synchronize my outlook calendar office 2011 for mac with ical and, therefore, with icloude. Can anyone help?
http://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards. -
My I phone 4 won't restored saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
HT4059 I recently updated to io6 and a cannot cancel a preorder. Can anyone help?
I recently updated to io6 and a cannot cancel a preorder. Can anyone help?
Can't you cancel it on a computer?
-
Updated my iphone4 to version 5 have lost my calender can anyone help
updated my iphone4 to version 5 have lost my calender can anyone help
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
HT4634 I just did a software update and my mail box will no longer open. Can anyone help me?
I just did a software update and my mailbox will no longer open. Can anyone help me?
Try opening mail, highlight your mailbox, under mailbox menu click rebuild mailbox.
Hope this helps.
Best -
Can anyone help please? I cannot access my email account settings within 'Settings', so I cannot change my details for existing email accounts, nor can I delete them or add others.
I can't access my Facebook settings within 'Settings' either but when I try to use the app it asks me to enter my password into my Facebook account in settings, but I can't do that either.
I've updated my software, restored and backed up my phone but it still doesn't work. Troubleshooting doesn't cover this.Go to Settings>General>Restrictions. Do you have restrictions on? If so, that would prevent you from making changes in some areas of the iPhone.
-
Incoming emails are showing strange symbols where the sender's name used to be in bold. The messages themselves are ok, it's just the sender's name. Can anyone help me figure this out?
Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable. -
I still have problems with Error 1402 in Adobe Reader 9.5 Installation. Can anyone help me?
Hi, I have a Compaq Presario C500 Laptop with Windows Vista installed. For the past year, I've been trying to upgrade from Adobe Reader version 8 to either a version 9 or 10. However, when I download and begin the installation, I always get two error messages:
The first one is the error 1402 could not open key. The registry path is HKEY LOCAL MACHINE\Software\Classes\PDFShellServer.PDFShelllnfo2\CurVer. Verify you have sufficient access to that key or contact your support personnel.
The second one occurs when it retrys: It say error 1402 could not open key. The registry path is HKEY LOCAL MACHINE\Software\Classes\AcroAccess.AcrobatAccess\CurVer. Verify you have sufficient access to that key or contact your support personnel.
I went to the troubleshooting page and followed the instructions given. But when I go into the Permissions area and do as the instructions say, regardless whether I click Apply or OK, I get a Windows Security message saying - Unable to set new owner on Cur Ver, Access is denied.
This does this no matter how many times I repeat the instructions for troubleshooting. Can anyone recommend another possible solution? Thanks!from: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/access-denied-setting-ow ner-andor-permissions-on/71cdd66a-75ce-4e79-bace-89637e0dacae
First be sure you run RegEdit as Administrator
Right click the key in the left hand pane ... select permissions from the context menu
In the permissions dialog, click the advanced button.
In the advanced security settings dialog switch to the Owner tab
I assume your usercode is a member of the local Administrators group
Click the Replace owner on subcontainers and objects box.
If Administrators is NOT the owner, select it in the change owner to box...press Apply...OK.
You are now back at the Permissions dialog box.
Select Administrators and give them Full control by selecting the Full Control checkbox in the Allow column...press Apply ... Ok
It has been a while since I have had to do this ... so I might be off a little on the steps.
The key is IGNORE any messages that say you don't have enought rights...
You must do each key... one at a time....:) -
My battery life on my ipod touch used to last for days if i wasnt using it. I have updated from itunes recently and my battery is draining in hours. i have switched off wifi and this has not helped. i also turned off notifications as well. can anyone help
Did you already reset your device by holding the sleep and home button until the Apple logo comes back again?
Also try to delete the mail account in case you're using push/fetch to get your mail. There have been cases in which mail didn't stop connecting to the server, causing the battery drain. -
Problem upgrading an iPhone 4 CDMA (Verizon) to ios 5. Can anyone help?
Trying to upgrade an iPhone 4 CDMA (Verizon) to ios 5 and am getting and error saying - "The iPhone could not be restored. This device isn't eligible for the requested build." It is currently running ios 4.2.10.
It completes a backup, does the extract, then the error message above comes up when iTunes shows it as 'verifing iPhone restore with Apple'
Phone was just reset to factory settings when the device was transferred between phone numbers on my Verizon account last night.
Any ideas? ThanksTry a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
My itunes crashes when i try to play a song
My itunes keeps crashing when I try to access the Itunes store or when i try playing a song...HELP!!!
-
Focus on JTextfield in JDialog box
A JDialog box is being opened from a menu. There is only one JTextfield on the dialog box and 2 buttons. The focus is not on any of the components in the dialog box and I want it on the textfield by default. I have tried all the requestFocus(),reques
-
Hi All, Currently when running transaction ME61 or ME63 to initiate the Vendor Evaluation, the system requires the selection of a "weight key" , this in order to allocate the correct weight percentages to the predetermined criteria elements: Price, Q
-
Downloaded 10.7 now can't access AppleWorks: "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported."
-
Changing account on ipad without losing purchased apps?
I originally set up my daughters ipad under my account, so I could transfer the games I had bought her on my ipad, how do I change her ipad to her own account? Thank you in advance for your advice. She has an ipad mini. Nicky