I hv a problem with my iphone when i rester is not working ...

hi . I have a problem with my I phone .16GB model number is A1303 FCC ID;***** IC ID;****... WHEN I RESATE MY IPHONE AFTER THAN IS NOT ON ...IS NOT OPEN ,IS NOT WORKING   THANK U .....
<Edited By Host>

okay. I tried the airplane mode and do not disturb on and off thing, resetting the network settings and all settings, restoring the iPhone using iTunes, draining phone using flashlight, reheating the phone using hair dryer and freezing the phone.. the freezing makes my wifi work again but it only last a couple of hours and I didn't want to try it anymore because I'm afraid it may cause another problem to my phone if I keep doing that.

Similar Messages

  • I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one. it is less than a year that I purchased this cell.

    I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one? it is less than a year that I purchased this cell.

    I would like to know the answer to that one.  I realized this was happening just after upgradeing my iOS to 6.  Then when I looked up my purchase date, I was about 5 days past my one year warranty.  So I'm dead in the water.  Apple will replace the battery, but it will be about $80+.  I took it to the Apple store, and they checked a bunch of stuff, but said that it seemed ok.  I'm debating getting a battery for a more reasonable price off of ebay.  But if it's the iOS thats draining the battery, then I'm not going to be able to help it.  I wish I knew a better way to tell if its the battery, the phone, or the iOS.

  • I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

  • Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =(  P.S. may be I wrote with some mistakes, so I apologyze for it

    hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
    so what should I do? please help me =( 
    P.S. may be I wrote with some mistakes, so I apologyze for it

    Hello darkhanfromaktobe,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Have a nice day,
    Mario

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • After upgraded ios6 i got problem with whatapp. "last seen" function is not working

    HI eveyone
    after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's  not work .. if someone know how to fix it, plz tell me how to do .. thanks

    Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

  • My iPhone 5 shows me there is a problem with your iPhone when it activate

    I got iphone5 from my chinese friend and it was wraped (in other words its new)
    And I cutted my micro SIM from my iphone 4 into nano SIM
    But when I try to activate this, the signal is searching... and no service.
    Also I tried through itunes to active my iphone and it shows me there is a problem with your iphone.
    is it country lock problem or probably my SIM card problem or itself problem..
    but when I tried without SIM card it shows me
    There is no SIM card installed in the iPhone you are attempting to activate.
    Please disconnect and insert a SIM card in the iPhone.
    What should I have to do now?
    Go to Apple store offline and diagnosis or go to mobile company and get nano SIM or something else...

    No, it wasn't jailbroken on iOS 5.1.1.

  • HT201301 I am having problem with Iphone5, it's show me iTunes & not working

    I am having a problem with my iPhone 5. It told to there was a system update. When I clicked it the screen showed me to plug it in to itunes however when going to itunes and updating it the phone won't turn on.

    What happened when you contacted iTunes support as directed?
    http://www.apple.com/support/itunes/contact/

  • Problems with re-grouping - subtotals and pagebreaks do not work

    I'm trying to create a report with all of my grouping in the template as opposed to the data definition. I've copied a simplified version of my code and xml below.
    I'm having two issues:
    1. The pagebreaks are not working. For every change in pagebreak_seg, second_seg, or third_seg there should be a pagebreak.
    2. The subtotalling isn't working. At each grouping level, I'm using sum(current-group()/...) to capture a subtotal at the new level. It worked the first 3 times (for Account_seg, Cat3 and Third_Seg, but stopped working at Second_seg. The second_seg keeps appearing after each Third Seg and has the same values rather than appearing at the end of the final Third Seg that falls within the Second_seg. Is there a limit to how many times I can do this, or have I got an error in here somewhere.
    I can email the xml and the template if that would be more helpful.
    Thanks very much for your help.
    What I'm expecting to see.
    1st Page
    entity: 001 My Department
    program: 72020 Financial Services
    organization: 160013 Human Resource Functions
    account 540300 desc and subtotals
    Subtotal these amounts under category of Travel
    account 522200 desc and subtotals
    Subtotal these amounts under category of Supplies and Services
    Subtotal for Human Resource Functions
    pagebreak
    2nd Page
    entity: 001 My Department
    program: 72020 Financial Services
    organization: 160018 Org 1
    account 5254000 desc and subototals
    Subtotal these amounts under category of Supplies and Services
    Subtotal for Org 1
    Grand Total for Financial services
    Grand total for My department
    --excerpt from template
    <?start:body?>
    ##<?for-each:XXFIN_PSBE2_XML?>
    ####<?for-each:LIST_G_HEADER_PAGE?>
    ######<?H_TITLE?>
    ####<?end for-each?><?PageBreak?>
    ####<?for-each-group:G_REPORT;PAGEBREAK_SEG?>
    ######<?for-each-group:current-group();./SECOND_SEG?>
    ########<?for-each-group:current-group();THIRD_SEG?>
    ##########<?SEG_1_HEADER?>
    ##########<?PAGEBREAK_SEG?>
    ##########<?PAGEBREAK_DESC?>
    ############<?for-each-group:current-group();CAT3?>
    ##############<?for-each-group:current-group();ACCOUNT_SEG?>
    ################<?ACCOUNT_SEG?>
    ################<?ACCOUNT_DESC?>
    ################<?sum (current-group()/APRIL)?>
    ################<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ##############<?end for-each-group?>--account seg
    ##############<?CAT3_DESC?>
    ##############<?sum (current-group()/APRIL)?>
    ##############<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ############<?end for-each-group?>--cat3
    ##########<?THIRD_DESC?>
    ##########<?sum (current-group()/APRIL)?>
    ##########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ##########<?split-by-page-break?>
    ########<?end for-each-group?>--third
    ########<?SECOND_DESC?>
    ########<?sum (current-group()/APRIL)?>
    ########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ########<?split-by-page-break?>
    ######<?end for-each-group?>--second
    ######<?split-by-page-break?>
    ####<?end for-each-group?>--pagebreak
    ##<?end for-each?> XXFIN_PSBE2_XML
    <?end body?>
    --simplified xml
    <?xml version="1.0" encoding="UTF-8"?>
    <XXFIN_PSBE2_XML>
    <p_actuals_year>2006-07</p_actuals_year>......
    <LIST_G_HEADER_PAGE>
    <G_HEADER_PAGE>
    <H_RECIPIENT_NAME/>
    <H_TITLE>Monthly Account Detail Report</H_TITLE>
    <H_USERNAME>DOREY</H_USERNAME>
    <F_FOOTER>Test.</F_FOOTER>
    </G_HEADER_PAGE>
    </LIST_G_HEADER_PAGE>
    <LIST_G_WORKSHEET1_NAME>
    <G_WORKSHEET1_NAME>
    <WORKSHEET1_NAME>001E1-6 Department - 8272</WORKSHEET1_NAME>
    </G_WORKSHEET1_NAME>
    </LIST_G_WORKSHEET1_NAME>
    <LIST_G_WORKSHEET2_NAME>
    </LIST_G_WORKSHEET2_NAME>
    <LIST_G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160013</THIRD_SEG>
    <THIRD_DESC>Human Resource Functions</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50015</CAT3>
    <CAT3_DESC>Travel</CAT3_DESC>
    <ACCOUNT_PRECISION>54</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>540300</ACCOUNT_SEG>
    <ACCOUNT_DESC>Accommodations &amp; Incidentals - In Province</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>Accommodations &amp; Incidentals - In Province</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>53</MAY>
    <JUNE>-53</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>0</SEPTEMBER>
    <OCTOBER>0</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>0</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>0</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF/>
    </G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160013</THIRD_SEG>
    <THIRD_DESC>Human Resource Functions</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50035</CAT3>
    <CAT3_DESC>Supplies and Services</CAT3_DESC>
    <ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>522200</ACCOUNT_SEG>
    <ACCOUNT_DESC>Rent of Photocopiers</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>Rent of Photocopiers</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>0</MAY>
    <JUNE>0</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>25</SEPTEMBER>
    <OCTOBER>-25</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>0</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>0</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF/>
    </G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160118</THIRD_SEG>
    <THIRD_DESC>Org 1</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50035</CAT3>
    <CAT3_DESC>Supplies and Services</CAT3_DESC>
    <ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>525400</ACCOUNT_SEG>
    <ACCOUNT_DESC>General -Telephone</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>General -Telephone</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>84</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>0</MAY>
    <JUNE>0</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>0</SEPTEMBER>
    <OCTOBER>0</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>84</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>84</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF>1</PERCENT_SPENT_OF>
    </G_REPORT>
    </LIST_G_REPORT>
    </XXFIN_PSBE2_XML>

    Additional info on the grouping problem:
    I tried removing the third_seg group and the second_seg group started working properly. I then deleted the second_seg group and the pagebreak_seg started working. So as long as I have only one level of grouping below cat3 the output is correct. Unfortunately I need those additional levels, so if anyone has any suggestions, I would really appreciate it.
    Alternately if someone knows of a sample with mutliple levels of grouping, I would appreciate a link. There was a link on the the BI Blog but it doesn't work any longer.
    Thanks for your help.

  • I downloaded A software to your computer. And I connected with my iPhone. Main page does not work. I can not see it. Iitnos Store does not cost me why?

    I downloaded A software to your computer. And I connected with my iPhone. Main pagedoes not work. I can not see it. Iitnos Store does not cost me why?

    Your posting makes no sense in the English language.  Please post in your native language.

  • Since I downloaded Mavericks on my MacBook Pro, I have problems with my email. Some accounts do not work. Some do.

    Some accounts do work, others not. I have removed the not working accounts and than added them again, didnt fix the problem. For the record; all accounts work perfectly on my other devices, Ipad and Iphone.

    Yep, everything worked fine before Mavericks. I removed the account that didnt work at all and re-installed it, didnt work. All accounts work fine on my other devices like Ipad and Iphone, so it's not in the account itself.

  • Problems with Satellite A300-1GC XP install - CD not working?

    Hi there
    I have few looks round in various forums and did not find any answer at all.
    I have the A300-1GC Satellite and had (since last night) vista on it. As Vista caused
    an awful lot of problems with various programs I decided to get rid of it.
    The problem now is - if I stick my XP installation CD it it reads "press any key to start from CD".
    Done that and then nothing happens. The CD reading head keeps on moving backwards and forwards
    but nothing happens at all. Not even the start of the blue installation screen.
    Any ideas where that comes from?
    Might the CD-rom also be running in AHCI mode (can a CD drive do that?) and requires drivers?
    I tried various XP CDs - neither works. The latest one I had was with SP3 and build in Feb 2009 so fairly recent.
    Any clues?
    Cheers
    Tobimaster

    Hi
    In your case the issue has nothing to do with SATA mode (AHCI or Compatible mode) but it look like the CD/DVD drive cannot handle the inserted Win XP disk
    Why? Who knows
    Fact is that the CD cannot be read and therefore the installation cannot get on.
    Try to copy this disk using another computer and then you could try to use the copied disk on order to install the Win XP.
    Just for info: I'm using TDK -R disks (CD and DVD)... I'm very satisfied

  • Problems with Find iPhone - my Apple ID is not an e-mail address

    Hi
    I have downloaded the Find iPhone app and when I start the application I have to enter the Apple ID and password. My Apple ID is just "gardkarlsen" but when I try to enter that, the app adds @me.com automatically. Isn't it possible to use Find iPhone if you have an Apple ID like the one I have?
    Regards
    Gard

    Thanks for the feedback. I have logged into to change the Apple ID but it doesn't work. At the bottom of the screen of the tutorial it says "NOTE: Some Apple IDs cannot be changed, like the one in this example. In that case, you must create a new one." So I guess that means that I have to create a new Apple ID? But how will that influence my current iTunes setup and sync towards the iPhone?
    Regards
    Gard

  • Problem with Acrobat Hyperlinks to packaged PDF's not working when moved to PC platform

    Hello,
    I'm having a little issue with the new Acrobat CC.
    I have a master PDF presentation that includes Hyperlinks (set up in Acrobat) that link to external pdf files (packaged in a sub-folder from the source PDF file).
    On a number of macs they work fine, opening in Acrobat / Reader. But when transferred to a PC platform the link clicks but none of the files are opening.
    I'm geting no dialogue boxes or error messages, just does nothing.
    Any help at all would be greatly appreciated.
    Thanks
    Matt

    Second question: I can't seem to link an image that I inserted on a "My Photos" template page. There is no way to select the image--when I do, it just shows the "blue box" around the image but it doesn't actually select the image itself so I can link it.
    This is correct, you cannot make the image holders hyperlinks. The solution is to put a Shape over the top of the image that you want to be a link, then Opn Inspector, Graphic Link and make the Opacity 1%, no more no less. Then make this shape a link. Beware that this image will still display in a slideshow and if you insert more images and it moves, the shape will not move with it.
    You may also want to click on the shape and then go Arrange > Bring to Front.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Hardware problem with my iPhone 5 got swapped but not getting warranty

    I recently got swapped my iPhone 5 which was having harware issue and was out of warranty with a new device but not getting warranty on new device.
    Is this expected or there is some issue due to which I dont see even 90 day complementary warranty?

    ok..thanks for your suggestion but my iphone not detected wifi since i received it..so do you think should i go to apple store and ask them to fix it?

Maybe you are looking for

  • HT1766 How do I back up music and lists from my iPad to my computer?

    I am trying to back up all content from my iPad to  my PC, so I can transfer it afterwards to my new iPad.  How can I do it? Making  a backup from the old iPad does not transfer all music

  • Logical name reset after system copy

    Hello I´have a question regarding logical system set after performing a database copy from Production to Quality . In Quality the former logical system name before the copy was INT10 . After the refresh I want to runs the BDLS with conversion from th

  • Macbook Pro will only display basic colours

    I set up my macbook pro to run dual monitors with my 20 inch LG display. It worked fine for a bit but then decided to run to only basically colours, probably 256 colours. I then shut it off and tried it again the next day thinking it was a heat issue

  • NIC install problem under Solaris 10

    I have an old 3Com NIC card (ISA) under Solaris 10. 3C509B Etherlink III card and prtconf -pv command shows correct PNP80f7 device id, all correct resources, IRQ, I/O address .... But fail to work. Is it sun does not support elx driver or something I

  • Partner role- Goods supplier name not coming in MIGO

    Hi, While configuring partner roles i did all settings ...in PO i am giving my goods supplier name in partner tab ...now when i am doing MIGO that supplier name is not coming in the screen.. What can be the reason? Utsav