I'hv not found any AirPort slot/socket

I'hv not found any socket or slot for installing AirPort Card in MAC MINI 1.25Ghz. How can I connect with my existing AirPort Network wirelessly ?

There is no standard Airport Extreme card socket in a Mac mini that didn't ship with an Airport Extreme and/or Bluetooth interface factory installed.
To add an Airport Extreme card to a Mac mini, you need to buy an adapter card for the logic board (which provides the actual Airport Extreme card slot) and an antenna. All required parts are provided by the Mac mini Airport Upgrade Kit (part number M9870Z/A) which is available for around $100 - do a web search on that part number. Note that Apple does not support "end users" doing this upgrade (it will void your warranty) - only Apple service centers are supposed to do it. You might first enquire from your local Apple dealer how much they would charge for the kit plus installation - the extra labor cost might be worth the grief you save trying to do it yourself.

Similar Messages

  • When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • Not identifying any airport

    hi there, my airport software is not recognizing any airport and timecapsule that i have in my network.....
    only my iphone and my notebook (PC) do....
    do you have any tip?
    When I need to configure something....need to be done im my pc...and not in my macpro....
    thanks

    You MUST have ipv6 set to link-local for the v6 utility to work.
    So go into your network preferences for both wireless and ethernet (if you use it) and set ipv6 correctly.
    This came out in a well hidden doco.
    http://support.apple.com/kb/TS4597
    eg

  • Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

    hey Sally,
    Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to  you
    http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
    Regards,
    A. Zaatari
    National Instruments
    Applications Engineer

  • I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

    I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • My macbook pro can not found any network WI-FI

    My mac book pro can not found any network in wifi but after turn of and turn on WI-FI for more than 10th it can found network and of course my network
    interesting is when i leave my room with my labtop without any trun of or on wifi,  network can detect  every WI-FI!!!
    any ideia ??

    Hi alirezaDavid,
    If you are having WiFi issues with your MacBook Pro, you may find the following article helpful:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    - Brenden

  • Could not found any usage key in the work center WC001(Use T-CODE CR02)?

    my question:
    (1) I have created one Work Center WC001 and one Plant HJW1.
    (2) I have created one Routing with T-CODE CA01.
    (3) Then I use T-CODE CA02 to change this Routing.
    (4) When I enter the Head details screen,I click the Operations button to enter the Operations Overview screen.
    (5) In the Operations Overview screen list,I input the Work Center WC001 and the Plant HJW1 at the first line and press enter.Then the sap raise error message like below.
    (6) The question was: I could not found any usage key in the work center WC001(Use T-CODE CR02)! Could any one tell me the answer or give me some advice to resolve the problem?Thank you so much.
    error message:
    Work center WC001 plant HJW1 does not exist for task list type N
    Message no. CR084
    Diagnosis
    You want to allocate the work center WC001 to a task list of the type N . However this work center is not intended to be used in a task list of the type N.
    Procedure
    The usage of a work center in task lists is restricted via the usage key. You define this key in work center customizing and allocate to it those task list types in which a work center with this usage key can be used.
    Proceed as follows:
    Check the usage key for the work center WC001 in work center maintenance.
    If necessary change the usage key in the work center or change the allocation of task list types to the usage key in customizing or
    allocate to the task list a work center which is valid for use in a task list of the type N.

    Hi
    1) Check what task list usage key you entered for the work center in the basic data . If it is 009 then the work center can be used in all task list type.
    2) If you have defined and used any other usage key , ensure that  for this key , the routing type N is allowed in OP45.
    Regards,
    Ramasamy

  • TS1436 when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

    when i try to burn a playlist using itunes i get this message at the top of itunes "disc recording not found" any solutions

      Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
    Gateway T5254
    iTunes 10.7.0.21
    QuickTime not available
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002EA6FC09015990
    Current user is an administrator.
    The current local date and time is 2012-10-03 15:59:17.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA , NVIDIA GeForce 6100 nForce 405
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2a5aa2a020c605e8b6db3d153f68aa7e
    The driver AFS.SYS is installed on the system.
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.

  • After hard reset my time capsule is not found in airport even though its light is green so cannot reset

    After hard reset the time capsule is not found in airport even though i have reconnected in proper order - says backup disc not found

    Something is wrong because a hard reset will never leave the TC with green LED.
    What version TC.. what firmware??
    What OS on the computer?

  • HT4623 when i go to settings general    i have not found any update option .... in iphone 3gs.. what should i do??? i m unable to update through itunes,

    when i go to settings>general>   i have not found any update option .... in iphone 3gs.. what should i do??? i m unable to update through itunes,

    Since there is no "Software Update", you are not yet up to iOS 5.  That is where that feature was introduced.
    So your only choice is to use iTunes to update your software.

  • Recently changed my email provider.  However, Calendar continues to try to send alerts to my old email provider.  I have not found any way to tell Calendar to use the correct email address.  I have chained iCloud, AppleID, and local email settings.

    Sorry for the long title - I thought I had to explain my entire problem there ...
    I recently switched ISPs, so now I have a new email address.  I've updated mail, can send and receive successfully, recreated my iCloud account, and made sure my Contacts entry was correct. But Calendar's alert function stubbornly tries to send email to my old email address.  I haven't found any way to change the list of email addresses that Calendar uses.  This is the Calendar desktop app, not iCal.  Any tips would be appreciated. 

    So what was the solution. I have a similar problem on all of my devices now

  • Can't burn a cd." message reads Disc recording not found.any help

    I have download all the new installers ran 64 bits but it won't let me burn a cd from the playlist. Message keeps coming up DISC RECORDING NOT FOUND.
    Any help you could give on this?? This my first time on this site, but I have burned lots of cds in the past with no problems. Thanks in advance.
    Patrick Case
    [email protected]

    Message keeps coming up DISC RECORDING NOT FOUND.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • SourceSet in function (Jscript) not found any Data View

    HI,
    I have the code:
    var = oDB xfa.sourceSet.DataConnection.clone (1);
    oDB.nodes.item (1). query.setAttribute ("text", "CommandType");
    oDB.nodes.item (1). query.select.nodes.item (0). value = "SELECT * FROM vw_products";
    oDB.open ();
    oDB.close ();
    This code works perfectly if I call in initialize the form.
    (form1.Inicial::initialize - (JavaScript, both))
    But the same code does not work if I call a function in Jscript, (Function test {} for example). Not found "sourceSet.DataConnection".
    Any idea what could be? I've tried everything but it only works if i put in initialize the page.

    And a further example from my library of examples, just to help you out...
    SQL> CREATE OR REPLACE TYPE num_descript AS OBJECT(num number, descript varchar2(30))
      2  /
    Type created.
    SQL> CREATE OR REPLACE TYPE tbl_num_descript AS TABLE OF num_descript
      2  /
    Type created.
    SQL> CREATE OR REPLACE PACKAGE reftest AS
      2    FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED;
      3  END;
      4  /
    Package created.
    SQL> CREATE OR REPLACE PACKAGE BODY reftest AS
      2    FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED IS
      3      v_obj num_descript := num_descript(NULL,NULL);
      4      v_rc  sys_refcursor;
      5    BEGIN
      6      IF p_choice = 1 THEN
      7        OPEN v_rc FOR SELECT empno as num, ename as descript FROM emp;
      8      ELSIF p_choice = 2 THEN
      9        OPEN v_rc FOR SELECT deptno as num, dname as descript FROM dept;
    10      END IF;
    11      LOOP
    12        FETCH v_rc INTO v_obj.num, v_obj.descript;
    13        EXIT WHEN v_rc%NOTFOUND;
    14        PIPE ROW(v_obj);
    15      END LOOP;
    16      CLOSE v_rc;
    17      RETURN;
    18    END;
    19  END;
    20  /
    Package body created.
    SQL> select * from table(reftest.pipedata(1));
           NUM DESCRIPT
          7369 SMITH
          7499 ALLEN
          7521 WARD
          7566 JONES
          7654 MARTIN
          7698 BLAKE
          7782 CLARK
          7788 SCOTT
          7839 KING
          7844 TURNER
          7876 ADAMS
          7900 JAMES
          7902 FORD
          7934 MILLER
    14 rows selected.
    SQL> select * from table(reftest.pipedata(2));
           NUM DESCRIPT
            10 ACCOUNTING
            20 RESEARCH
            30 SALES
            40 OPERATIONS

  • Can't get in to my files on cloud - getting page not found - any issues Adobe end or is it my account?

    Second time this has happened, getting page not found when try to access 'files' tab online, on desktops and ipad. Supposed to be collaborating (sigh). Any one else getting this issue on their account? Assuming not an Adobe server issue.

    Account help links...
    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -email address https://forums.adobe.com/thread/1446019

  • Dv 9000 mic not working, not found. any ideas?

    dv 9000 internal mic stopped working, and not found in device manager. any helpful ideas?

    Have you updated Audio driver?
    please go through this document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833331&cc=us&lc=en&dlc=en&product=1842189&tmp...
    ||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
    //Click on Kudos if my reply was helpful and answered your question//
    ||-If my answer solved the problem please mark the topic as the accepted solution-||

Maybe you are looking for

  • Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue

    I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The virtual desktop must be in a stopped state:  Could not identify the state of the virtual desktop.  Ensure that the RD virtualisation host server is availab

  • Slow finding position N8

    I have recently purchased a Nokia N8, my problem is with Ovi Maps.  When I click on maps\my position it puts me somewhere in the middle of the river Mersey when I am about 3 miles away.  When I click on drive to somewhere it says Waiting for GPS and

  • Illustrator CS3 crashes when trying to place an item

    I'm running CS3 on an iMac running OS 10.5.8. Just recently (the past few days) my Illustrator has been crashing when I attempt to place a file. I've attempted to place a variety of files (.jpg, .eps, .PSD) and usually Illustrator would crash after s

  • UI language is not changing

    Hi all; I have created a new ADDON using UDO. Everything working fine but the only problem is that the UI language for the addon is not changing accroding to company language instead of that is  always showing in English. Please give some solution. T

  • Unable to download IOS 8

    I Am unable to download IOS 8.1. Even though I have bought more storage  thank you