I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Similar Messages

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

How can I easily import Canon Mark III video into iMovie or Final Cut Pro X? Do I need a converter? Thanks!

Just click the import button and point it at the camera card.

How to import Sony DCR-SX85 video into iMovie. Doesn't do it automatically and using Mpeg stream lip didn't help. I have iMovie HD 6.0.3

Can't import Sony DCR-SX85 video into iMovie HD 6.0.3. MPEG stream clip didn't work. This has been discussed before, but I haven't found a solution yet.

Can't import Sony DCR-SX85 video into iMovie HD 6.0.3. MPEG stream clip didn't work. This has been discussed before, but I haven't found a solution yet.

Importing Anamorphic 16:9 video into iMovie

How can I import anamorphic 16:9 video into iMovie?
I tick the "automatic letterbox & pillarboxing" to off
and import.
The resulting video is made into 4:3 format and squashed up!
When I import into iDVD the video is pillar boxed even when selecting widescreen project.
I have a SONY digital 8 camcorder connected to iMac by firewire.
Please Help!
iMac G5 2.1 Mac OS X (10.4.6)
iMac G5 2.1 Mac OS X (10.4.6)

Hello Roller,
iMovie simply takes your footage for what it really is: standard 4:3 with a letterbox.
you could try capturing with a different software like Vidi or BTV Pro:
vidi
http://www.mitzpettel.com/software/vidi.php
BTV Pro
http://www.bensoftware.com/
There is a little droplet that will flag the material correctly once you have it on your Mac. It's called Anamorphicizer and you can find it here:
http://homepage.mac.com/sith33/FileSharing34.html
hope this helps
mish

FireWire is the only way to import Canon HV20 Camcorder videos into iMovie?

As a followup to my last post a moment ago tonight 1/30/08:
Is it true that I need a FireWire cable to import Canon HV20 Camcorder videos into iMovie?
If so, the Apple salesperson is wrong.
He told me last Monday that purchasing the new iLife 2008 (that contains iMovie 2008) would allow me to use my current USB cable.
Given I see NO FireWire port on my new MacBook Pro (bought in 8/2006), I don't see a solution.
Note the camera, an HD camcorder (the Canon HV20) did NOT come with a FireWire cable; it only came with a USB male plug on one side of the cable and the other is a small square-like male plug that connects to a female port on the Canon HV20.
Solution?
Thanks for any suggestions, Daniel

The USB cable is for importing still photographs. Not video.
The firewire 400 cable you need is one that goes from the 6 pin full size male connector to the small 4 pin form used for DV.
The cable plugs into the camera in a socket behind a plastic flap near the eyepiece. Its marked HDV/DV. The other end plugs into the MBP on the right-hand side. 4th from the back.

When I import new home videos into my iTunes and edit the names it creates duplicate Library's on my Apple Tv. How can I stop this from happening each time I edit a name in iTunes home videos??

I am having an issue with duplicate Libraries showing up in my Home Sharing "Home Videos". It happens when I import home videos into iTunes and change the names of the files. How do I avoid this from happening and delete the duplicate libraries?

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

How can I burn a Motion Video into a dvd and keep the same quality?

I tried exporting my Motion video into Quick time but the quality is horrible. The images and text are blurry.
How can I export this video into a DVD or CD and keeping the best quality of the video?
Would Appreciate someones help.
Thank you

Try this - export the Motion file as an animation and import into FCP - then apply color correction, if necessary. Then push it through Compressor and onto DVD.....
Hope that helps.

HT5312 My husband relinquished this IPad to me when he had to purchase another type of tablet. Presently, all his information is imbedded into this IPad and I would like this IPad to default to it's original position. How can I accomplish this?

My husband relinquished this IPad to me when he had to purchase another product for work. How do I reset this IPad to it's original new settings?

See Here...
What to do before selling or giving away your iPhone, iPad, or iPod touch

How to I import video into imovie without it randomly shutting down and only importing 30 seconds of video?

I have already tried restarting computer, checking memory, restarting imovie, and this is not the first time this has happened. Please help with this problem.

Post in the iMovie forums.

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertical

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertically and when I preview (on full-screen) what I've combined, first it's wide-screen, then it's tall, narrow with wide black sides.
The film looks choppy, no flow, since it alternates horizontally and vertically.
I can import the vertical clips two ways: "Full-Original Size", or "Large 960x540." But the vertical clips have very short, fat people.
This didn't happen with my Flip HD; the movies are smooth and terrific. My heart is breaking.....please, how can I make the videos match?

Yes, I'd like to use all the video I shot, put it together with music, titles, etc. and make it consistant. when it goes from full screen to this vertical, narrow clip, it's very awkward.....and it's so narrow, it's hard to see what I'm looking at; my eyes don't make the adjustment quickly.

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie?

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie? (each 15 minute segment to iMovie)

In iMovie's Project Library view (where all your projects are listed), click on the name of your project (don't double-click to open it, just single click to highlight it).
From the Menu select File > Duplicate Project. A copy of your project will be placed in the Project Library. It will have the same name as the original, but with a number appended. You can rename it if desired - click on its name twice (not double-click) so that it is highlighted as light blue, then over-type it.
Delete from the duplicate all the clips and other media (for example, photos, music and so forth) that you don't want included in the first of your 15 minute segments. In other words, delete all but the first 15 minutes.
Continue creating duplicates of the original (and rename if necessary). Delete from each duplicate all the unrequired parts for each segment. So, for example, for the 2nd duplicate delete the first quarter (15 minutes) and the 3rd and 4th quarters.
You should end up with 4 duplicates with separate names, each containing the required segment. You will also have kept intact the original one hour movie, which you may wish to use independently of YouTube (maybe for burning a DVD or playback through a Media Player).
Note that duplicating the original project will not take up much extra space on your drive. Projects reference (link to) the associated Event (or Events) in the Event Library - they don't actually contain video as such. The project file also keeps track of titles, transitions, effects, music and so forth that you've added to the project.
John
Message was edited by: John Cogdell

I tried to import a video into iMovie. Its says their is not enough space on the destination disk. I deleted many projects, and events. Nothing changed. What files do I delete and how?

I tried to import a video into iMovie. Its says their is not enough space on the destination disk. I deleted many projects, and events. Nothing changed. What files do I delete and how?

Hard drive full or near full:
You are going to have to delete, move or archive your data to regain hard drive space.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be moved, also, to the external hard drive and then either archived to disc and/or deleted off your internal hard drive.
You may have to Purchase an external FireWire or Thunderbolt hard drive to move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
Good Luck!

I imported a 17' MiniDV piece into iMovie and it's lost synch. How can that be? I have done no editing, I just want to make it into a DVD.

imported a 17' MiniDV piece into iMovie and it's lost synch. How can that be? I have done no editing, I just want to make it into a DVD.

Hi
Do You mean miniDV tape (interlaced video PAL or NTSC) ?
If so - iMovie'08 or 09 or 11 - are not tools of Choise if You want a DVD as result - They all discards every second line resulting in less quality.
Sync. Problem - If miniDV tape - How was it recorded -
Audio mode - Is Camera set to record in 12-bit 32kHz - Should be 16-bit 48kHz
Recording mode - SP (60 min on a 60 min tape) or LP (90 min on 60 min tape)
If LP-mode - Then You need - Same Camera as recorded - tolerances is to small even for a Camera of same brand and type to play-back.
I would use FinalCut Express and a setting of PAL/N TSC and 32kHz audio if Camera is set to record in 12-bit
If LP-mode - iMovie HD6 is more tolerant in Captuing than FinalCut and Imediatly after Import/Capture - Extract Audio
And set iM HD6 to NOT IMPORT AS INDIVIDUAL Clips - to many drop outs to work.
Yours Wildly Guessing Bengt W

How can I import video into iMovie from a DVD?

How can I import video into iMovie from a DVD?
Thanks,
Doug Davis

You can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
See detailed instructions here.
https://discussions.apple.com/docs/DOC-3951

TS3355 I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

It depends on the type of video. iMovie will only import video that it can edit.
In general, you would use FILE/IMPORT MOVIE...

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Similar Messages

Maybe you are looking for