I imported some AVI files. The audio is over modulated in Premiere, but fine in any other player.

What is inside the AVI wrapper?
Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Similar Messages

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book

I have downloaded a Audio Book from Itunes Store, but rencently i have had to reinstall windows, is there any way to re-download the audio book from Itunes, i know that the audio books are one time downloads, but is there any way to get the audio book back as i have already paid for it once and i would not like to pay for it twice.

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

When i import H264 .mov files the audio slows down. MAC

I have a mac, running Mavericks OSX and i'm using Premiere CC.
When I import a .mov file with h264 encoding the audio plays back very slowly.
I know that Premiere can't handle h264 in an avi wrapper or so it has been said in old forums, but these are .mov files. How has this been an issue since CS 3 and it hasn't been fixed?
I would expect an import setting could be changed to fix this but i can't seem to find any import settings.
other than transcode everything again, is there an easy fix for this?
Thank you for your help.

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

Any ideas why I can't import some AVI files into CS6?

The file is coming up as H.264/MPEG-4 AVC and imports into CS3 without any issues,plays fine in Bridge CS6 too.(Cretive Cloud User)

What is the codec inside that MPG wrapper?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Import DV AVI Files with 5.1 Audio

To my surprise, Encore would not import DV AVI files from Premiere with 5.1 Audio. I much prefer to do my transcoding in Encore rather than in Premiere so I don't have to guess how much disk space will remain after menus and other content. Also, I think Encore transcoding is more efficient than Premiere.
Yet, cheaper and less sophisticated applications such as Nerovision will import DV AVI files with 5.1 audio, and give you 5.1 DVD's.
Which leads to another question, why does a cheaper application just give you the Dolby Digital 5.1 Audio, while a fee has to be paid to Surcode to get it in the Adobe applications?

You cannot create a 5.1 Dolby Digital file in Encore, so the answer is an emphatic "YES" to the planning & budgeting.
You really should be doing this anyway, as it is a real eye opener. There are some superb Excel spreadsheet bit budgeting tools, as well as a simple enough manual method. It should be detailed in the FAQ.
As far as DTS goes, you'll need an encoder again. The only plugin version I am aware of is for Steinberg's Nuendo & Cubase systems, but both DTS and SurCode make them.
The SurCode DTS-DVD encoder is dated now - 5 years or so - and the Nuendo one sounds better. Having said that, the DTS-PSE sounds even better, as well as having DTS-ES and DTS 96/24 capability (both of which are DVD Legal).
Even better are the soon-to-be-released DTS-HD SAS & MAS encoders.
These are primarily for the Blue-ish type discs, but also cater for so-called "legacy" encoding as well, and the detail is even better than the DTS-PSE version. You can hear the difference in the detail where the top end sounds more natural & open. Whatever version you get will make Dobly Dirgital sound dull & muddy by comparison.
Quality can be improved by feeding the encoder with 24 bit audio too - this also applies to Dolby Digital.
Bitrates for DTS are either 754 kb/sec or 1509 kb/sec, and come in 2 flavours:
Compact (.cpt) and Padded (.dts) - either can use the lower bitrate, and there is no difference in audio quality between the CPT and DTS flavours. I recommend using the higher bitrate personally.
Both types are supported in Passthrough mode in Encore - that is to say they import, and multiplex correctly but cannot be previewed.
Hope this helps.

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??

Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??
ps
i got a backup for the files but even if they are on the mmc, when camera is connected fcpx doesn't see them. if i try to import a new shoot it works!!

Thx a lot Salty. As you suggest I found other staff on support pages. I deleted AVCHD structure and kept only .mts... Now what I need to do is to convert those files with handbrake or similar tool in .mp4 or .mov to make them digest to FCPX.

I can't get Premier Elements 10 to import an AVI file from my computer.

I just bought Adobe Premier 10 two days ago, and I'm trying to import an AVI file from my computer. It says Add Media Failure. This type of file is not supported or the required codec is not installed. The program installed all right, so I don't know what to do since I bought this software to create movies with the video from my camera, which is in AVI format.

Hi Bill, thanks for replying so quickly.
In review of your suggestions, I cannot see where these would be the answer. While I do use 2 computers, both have identical OS, APE-10, and Quicktime versions as well as camera software/drivers. I have not updated the camera firmware in some time, so I do not think this can be the issue, besides I have used both computers in the past few weeks, with no issues, until just recently. Perhaps it was a Win7 update that messed it up?
However, while waiting for a forum response, I did some further research and found a codec pack (windows.7.codec.pack v.4.03) on CNET. The description sounded exactly like the issues I am having so I downloaded and installed it. (I also converted the original AVI files to MPEG-2, just in case).
After the codec pack install, the AVI files loaded into APE and showed with no issues.
I have not yet tried the MOV files as they were not mentioned in the codec pack info, other than; 'and many more'. (one issue at a time!) I did download and installed the latest QT app (but it was the same version I had) so maybe there was something corrupt in the original. We shall see!
I cannot try it now as I am presently rendering the video, but if I still cannot load the full video MOV files, other than audio only, as old Arnie would say, "I'll be back!" (according to the APE estimate, about 1:12.
Thanks again for the assist. If it helps you in any way, I will check the box that says the reply fixed the problem! ('Was this Helpful?')
Doug

Import 2 avi files and combine in 1 dvd

Hi En experts!
I have installed the Encore Cs5 Trial with Win7 64bit.
Now i will import 2 avi files (part 1 and part 2 for a video) and combine in sequence and after write a dvd for my tv-dvd player..is possible? Give me please instructions...
Thank's and sorry for my poor english !
Ciao from Italy!

With two separate Assets, I would recommend doing one separate Timeline for each one, as this can circumvent some issues, when one gangs Assets onto one Timeline. If you need continuous play for multiple Timelines, then just use Playlists and you can choose to play any/all Timeline(s), and in any order desired.
Even with separate Timelines, one can still use Chapter Markers and can then use Chapter Playlists to access those as desired.
Make sure that you do NOT use any Overrides anywhere - use Playlists, or Chapter Playlists instead.
Happy authoring,
Hunt

CS4 Windows problems: crash very often, stuck when import certain avi files

The followling problems are in CS4 (newer updated) Windows (Windows XP SP3):
I am using Premiere Pro in CS4 and the program crashes so often (it crashes more than 10 times in one afternoon). It usually starts when I place clip, photoshop file, or other assets to sequence. If it starts leave a lot of frames while I pull the asset (there will be the same frame over the path my mouse went), it is a signal to crash soon. After it restarts, it usually loses the last saved information (even I saved the project way before it crashes). I do not know whether other users see the similar behavior.
The second problem does not look like only for CS4. It happens in CS3 too. When I place an AVI file (not sure whether other format behaves the same), the import program will stuck in the end (while it shows "generate peaks from xxx.avi"). It will take forever and I never successfully finish importing the file. I worked around and realized it only happens to the avi files I captured from Movie maker (use Auto capture option). The avi file can be played in Windows Media player. If I use Movie maker to cut the end of the avi file, the new avi file can be imported to Premiere without any problem. It seems the last few frames in the captured avi file has problem so the import subfunction will stuck there. I am not sure whether this is the case. If it is, the program should be "SMART" enough to go on or ignore the bad frames.
Any idea?

Thanks, Harm. This brings to another problem I had. While I am using PR to capture DV from my two mini-DV cameras, sometimes it just generates a lot flicks or "snow" in the avi files. But with Movie Maker, the same tape will not have such problem. This is why I am using Movie maker to capture the movie since it is accessible beside PR. It seems the PR problem is only for the last few frames so I just cut the last few frames off. I do not know why PR cannot just generate an Error message to UI so we will not just wait there for hours. I did some programming to control many instruments and I understand I cannot project every problem the program will encount, but at least I can generate an error message to tell the user where the problem is. Is this the fundmental guideline for programmers? If PR does like the format, let us know when it reads. It is very frustrated while you wait there hours and hours without any idea why it stucks!

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

(Some AVI files not working with PlayVideo.java)Java Doctors - NEEDED

Hi ,
I m working on JMF, I m not getting video output while I run some
.AVI files 1999 version and some movie clips which are .dat files
Is there any solution for this.?
I think JMF should give proper solution for all videos and audios.
Thanks for all who are working in this wonderfull API
Thanks for SUN also for their work in Java and JMF ....
BYE,
KIRAN Kumar Jakkaraju
Java Developer,
Salvation Software Services.

Thank you very much.
But AVI and .mov will take much size than .dat files.
so its better to concentrate in .dat files also for JMF I think.
Is it true.
I have a file of avi takes - 100mb for 3 min play of video
if u convert to .mov takes - 60-70mb for the same time of video.
I think you you have .dat files , for a movie of 2hours it takes only 1gb of size and can be shipped in two 500mb cds.
Please if you have any solution to reduce the avi file sizes please let me know.
Thank you,
Kiran

500GB StorE TV not playing some AVI files

Hoping someone can help please!
I recently purchased a StorE TV 500GB here in South Africa.
The device works perfectly on AV and HDMI, am very happy with it. Except some AVI files which I have that I can play on my PC/Laptop do not play on the StorE TV through either the HDMI or the AV connection?
I am assuming that the AVI files do not fit the specifications of the StorE? If I converted them to MP4, what are the best settings, dimensions, encoding format etc I should use? I will be using a program called Handbbrake.
Thanks in advance.

Hi, I am from SA too, and also recently bought one 500gb .
I assume you didnt read the manual, cos it says it only supports certain files and with a Max Resolution of 720 x 576 !!
I think alot of ppl only check the file name and forget about the supported resolution.
so if any avi / mp4 files have a higher resolution it wont play. so try setting Handbbrake to recode with that resolution.
I have tried this with my recode software and it then works.
( and no it doesnt play .mkv files , so you'll need to convert any of these too )
Regards

I can't use some .avi files with CS4

I have 2 computers. One with W7 64 bits and PP CS5 and a laptop with Vista 32bits, so I had to install PP CS4 provided with Adobe CS5-5 production premium.
I have a problem with CS4 (as it works with my CS5): some.avi files are not read by CS4 as some other (.avi, .mp4, .m2ts) are read! I can install the file on the timeline, but only the sound is read, no pictures!
I'm not a specialist in computer, neither in Premire Pro, and my english is very bad (Yes, I know, I'm french...) ! Any idea of what to do, please ?
Thank you so much.

I agree with Jim. Knowing what is inside those AVI files, that are faulting, will likely tell the tale.
This article goes into a lot more detail on AVI (and MOV, etc.) as a "wrapper:" http://forums.adobe.com/thread/440037?tstart=0
It is what's inside, that matters. It might be as simple as just installing the proper CODEC, or it might be that the CODEC used, is a delivery-only CODEC, like DivX, Xvid, and some others.
Good luck, and please let us know a bit more.
Hunt

I imported some AVI files. The audio is over modulated in Premiere, but fine in any other player.

Similar Messages

Maybe you are looking for