I insa alled EP6 successfully but I got "User authentication failed"
Hi friends ,
I got this error when I tried to log in with adminstrator and with password, I will be thankfull If any one resolve my error
regards
raj
Hi Raj,
Open the Config Tool.
\usr\sap\<SID>\j2ee<instance_Number>\j2ee\configtool\configtool.bat
Go to
cluster-data --> Globar Server Configuration --> Services --> com.sap.security.core.ume.service
Set the parameter
ume.superadmin.activate = TRUE
ume.superadmin.password = <password>
Try logon in portal with this new password.
If you install only java the user is Administrator
If you install Java/Abap the user is j2ee_admin
Good Luck
Eduardo
Similar Messages
-
User Authentication Failed via http BUT not with Visual Administrator !!?
OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
security.3.log
<i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
server.0.log
<i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
 I tried to connect http://host:port/sld same problem User Authentication Failed
<b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
Thanks in advance
YvesHi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves -
i downloaded ios5 to my ipad. Initially had problem with apps which was fixed by downloading an upgrade and they all staarted working. But everything is so slow it is almost useless. i have tried rebooting, it didn't help.
Other users have reported this very same issue after updating their iPads. You are using the original iPad according to your profile and those devices seem to be the more adversely affected devices. You can try the basic things and see if any of this helps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If none of those things help, you can always try restoring your iPad. I have restored mine with some success, but I still have issues that I hope will be resolved soon.
An update to the iOS has been announced and it is in Beta now. Hopefully it will be released to all users soon. -
User missing from all site collections but present in User Profile (Central Admin)
I have a user who does not show up in "People and Groups" (or if I search for this user) in any of the site collections but does show up when I look up his user profile on Central Admin. I've tried to add this user to the site collection using
the following command, but I get an error: " The specified user domain\accountname could not be found."
Get-SPWeb 'http://site' | New-SPUser -UserAlias 'domain\accountname'
Idk if this is related, but on this user's profile, "Personal Site" field shows up as "SPSSITEERROR".
Any help would be greatly appreciated.
Thanks.Hi,
I recommend to check if the user exists in Active Directory firstly.
If yes, then the error will occur. And for the user profile of the user, it may due to the user profiles have not been synced with Active Directory yet.
That "Personal Site" field shows up as "SPSSITEERROR" means that the MySite of that user has not been created successfully.
I recommend to run User Profile Synchronization timer job and then check the results.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
If anyone knows what my next step is, please help! Thanks
Are you absolutely sure that your new Mac had Lion installed? If so, are you now absolutely sure you are running Snow Leopard? What does About This Mac under the Apple icon in the menu say about what system you are running.
Snow Leopard will not install on top of Lion. You have to erase the HD to downgrade from Lion to Snow Leopard. Migration Assistant doesn't have the capability of doing this. -
Using workshop to build EAR successfully but deployment of the EAR fails.
Hi there,
i've developed an application using Weblogic workshop. And also, It's been working fine when using the workshop to deploy and test in exploded format.
When building the EAR using workshop, the ear file was built successfully without any errors. But, when it's deployed as an EAR, the deployment failed!
This is the error throwing out at the console:
Aug 2, 2004 9:13:14 PM GMT+08:00> <Warning> <Deployer> <BEA-149004> <Failures w
re detected while initiating Deploy task for application Rapid.>
Aug 2, 2004 9:13:14 PM GMT+08:00> <Error> <Deployer> <BEA-149201> <Failed to co
plete the deployment task with ID 0 for the application Rapid.
ava.lang.NoClassDefFoundError: com/bea/wlw/runtime/core/bean/SLSBContainerBean
at java.lang.ClassLoader.defineClass(Ljava.lang.String;[BIILjava.securit
.ProtectionDomain;)Ljava.lang.Class;(Unknown Source)
at java.security.SecureClassLoader.defineClass(Ljava.lang.String;[BIILja
a.security.CodeSource;)Ljava.lang.Class;(SecureClassLoader.java:123)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Ljava.l
ng.String;)Ljava.lang.Class;(GenericClassLoader.java:476)
at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.S
ring;)Ljava.lang.Class;(GenericClassLoader.java:181)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;
Unknown Source)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(
nknown Source)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.S
ring;)Ljava.lang.Class;(GenericClassLoader.java:223)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(Lja
a.lang.ClassLoader;)V(EJBModule.java:1030)
at weblogic.ejb20.deployer.EJBModule.prepare(Ljava.lang.ClassLoader;)V(E
BModule.java:481)
And also, i notice that in the EAR file there is .workshop folder. will it cause any problem?
If the workshop deployed successfully in exploded format and application works properly, as well as generating the EAR file without any error, shouldn't the generated EAR file to be deployed without error?
Would anyone help up please?Did you deploy the application in a workshop enabled domain?
Hi there,
i've developed an application using Weblogic
workshop. And also, It's been working fine when
using the workshop to deploy and test in exploded
format.
When building the EAR using workshop, the ear file
was built successfully without any errors. But, when
it's deployed as an EAR, the deployment failed!
This is the error throwing out at the
console:
Aug 2, 2004 9:13:14 PM GMT+08:00> <Warning>
<Deployer> <BEA-149004> <Failures w
re detected while initiating Deploy task for
application Rapid.>
Aug 2, 2004 9:13:14 PM GMT+08:00> <Error> <Deployer>
<BEA-149201> <Failed to co
plete the deployment task with ID 0 for the
application Rapid.
ava.lang.NoClassDefFoundError:
com/bea/wlw/runtime/core/bean/SLSBContainerBean
at
at
at
t
java.lang.ClassLoader.defineClass(Ljava.lang.String;[B
IILjava.securit
.ProtectionDomain;)Ljava.lang.Class;(Unknown Source)
at
at
at
t
java.security.SecureClassLoader.defineClass(Ljava.lang
.String;[BIILja
a.security.CodeSource;)Ljava.lang.Class;(SecureClassLo
ader.java:123)
at
at
at
t
weblogic.utils.classloaders.GenericClassLoader.findLoc
alClass(Ljava.l
ng.String;)Ljava.lang.Class;(GenericClassLoader.java:4
76)
at
at
at
t
weblogic.utils.classloaders.GenericClassLoader.findCla
ss(Ljava.lang.S
ring;)Ljava.lang.Class;(GenericClassLoader.java:181)
at
at
at
t
java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Lj
ava.lang.Class;
Unknown Source)
at
at
at
t
java.lang.ClassLoader.loadClass(Ljava.lang.String;)Lja
va.lang.Class;(
nknown Source)
at
at
at
t
weblogic.utils.classloaders.GenericClassLoader.loadCla
ss(Ljava.lang.S
ring;)Ljava.lang.Class;(GenericClassLoader.java:223)
at
at
at
t
weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassD
ependencies(Lja
a.lang.ClassLoader;)V(EJBModule.java:1030)
at
at
at
t
weblogic.ejb20.deployer.EJBModule.prepare(Ljava.lang.C
lassLoader;)V(E
BModule.java:481)
And also, i notice that in the EAR file there is
.workshop folder. will it cause any problem?
If the workshop deployed successfully in exploded
format and application works properly, as well as
generating the EAR file without any error, shouldn't
the generated EAR file to be deployed without error?
Would anyone help up please? -
Redirect to the jsp page after user authenticated successfully
Here is the requirement
Im using JAAS Custom Login Module for user authentication.
I have few questions in Portal Logon process
1. Exactly at what point I can conclude that the user has been authenticated successfully, because I have to redirect the user to some other page for the first time logon to enter some information, subsequent logins shouldnt be redirected. (I can update flag upon entering information).
2. Where should I add my redirection code? Is it in my JASS Custom Login Module?
If yes, how can I do that ? Im more consider on where should I add it?
3. Do I need to change my UmLogonPage.jsp to complete my requirement?
4. Once after entering the Logon information, who will call my JASS Custom Login Module for authentication? If authentication has failed who will return the control back to the umLogonPage.jsp?
5. In my JASS Custom Login Module, I have no redirections except having logic for authentication process, and some Login Exceptions are thrown for failure logins.
6. Who will catch these exceptions for failure logins to redirect back to the umLogonPage.jsp.
7. Finally I like to know where can I add my redirection logic once the user has been authenticated successfully?
8. last but not least can any of the experts explain the whole login process (using JASS module)? How the control goes from one component to another?
Any kind of help is appreciated.
Points can be awarded for useful answers.
Thanks
MMKThanks a lot for your valuable reply.
yes what you said was correct, storing information in R/3 System and getting the details from FM using Connector framework.
You said i have to modify "header.jsp", can you please tell which .par file should i get to modify?
one more question to you ... i have provide custom logon error messages to the user ... i did all the modification in logon.par and deployed in EP 6 .. working fine .. i can able to see "User ID Missing" , "Password Missing" etc ..
when i place same peace of code in EP 7 it always displaying "User Authentication failed". can u guess what whould be the problem?
Thanks
MMK -
i have tried for new tab page, also done the process from about:config n all, i successfully got the newtab but once i restart firefox i get blank newtab not the most visited sites type new tab... plz help
In case you are using "Clear history when Firefox closes":
*do not clear the Cache because Firefox will disable the disk cache in such a case
*do not clear the Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
See also:
*https://support.mozilla.org/kb/thumbnails-on-new-tab-page-are-missing
The thumbnails on the about:newtab page are generated from the cache, so if the page is not in the cache or otherwise can't or won't (secure pages) be rendered as a PNG image then you will get an empty box.
*Do not use Clear Recent History to clear data like the cache and the history when you close Firefox
If there is no history then you get an about:newtab page with empty boxes (no URLs). -
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.
On opening the app "Find my iPhone" I add my password and sign in, to be greeted with a screen that says;
"Update Find My iPhone. A new version of Find My iPhone is available from the App. Store. You must install the update to continue using the app. Update now"
On hitting the "Update now" button I'm taken to the relevant page on the App Store, to be told that I cannot update as it needs IOS8 to be able to continue and as my iPhone is only a 4 cannot install IOS8.
I'm left going around in circles. The only thing would be to delete the app, but looks like I could not re-install the version I would need. Any body have any thoughts or suggestions? (Apart from updating my phone, I have a few months left on the contract!)
Thanks in advance.Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
I got the iPhone 5s this morning and I kept my number and as soon as it charged I got all my messages, but when I connected it to my iCloud and backed it up, when it was finished all the messages I received were gone. How do I get them back?
Hi sofia124,
Welcome to the Apple Support Communities!
It sounds like you may have either set the iPhone up as a new iPhone or restored from a backup that didn’t have your messages on it. If you do have either an iCloud or iTunes backup that you believe has your messages saved, you can restore from that backup to recover your information. Please use the attached article as a reference for restoring from a backup.
Back up and restore your iOS device with iCloud or iTunes
Have a great day,
Joe -
how can I get all of my music off of my laptop and onto an external hard drive? I bought a new hard drive for it but it got turned into a Time Machine drive... I want to have all of my music on the external hard drive, and NOT on my macbook pro. Thanks everyone
Hello lramospsych,
To move your iTunes media library to a different location, take a look at the article below to walk you through that process. Make sure that you have everything organized before you move everything over.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Regards,
-Norm G.
Maybe you are looking for
-
Jabber and impacting other applications
We just put in our new Cisco phone system last week. We are seeing some issues running the Jabber client with other programs. I have three programs where we have seen some sort of impact. First one is runs a live stream to an excel spread sheet. Whil
-
Why there are two init methods?
I copied this code from netbeans for a JApplet.. and it has two init methods One is public void init() that calls another initComponents() method. And the initComponents() method has all the components defined in it, and it is private. I replaced pri
-
Audio Clicking and broken up when playing back from timeline
Can anyone please give me some advice about a possible solution to a continuing audio problem I am having when using the Tascam Fireone with Final Cut Pro 5.1.4. (Fireone working well with Logic 7 on the same machine) The Symptoms are as follow: When
-
hello, My iBook G4 returns to March 1st 1970. It appens with and without battery connected. The battery is the original. I want to know if the battery is out ? Or is there another battery on board to change, because it's out. Maybe it's just my OS? T
-
NoClassDefFoundError after accessing AbstractPortalComponent iview in porta
Hi I have built a Portal Application Project -> Portal Application Object -> Abstract Portal Component in NWDS. In this application I am trying to access details of an PCD object iview. I am using following article for this. [http://www.sdn.sap.com/i