I instaled Techtool pro 6 and login in server failed

Hallo, I was instaled Techttol pro 6 with eDrive and restard from eDrive. Login on server is failed. What can I do? I'm traied change password, but nothing.
Non I restoring server from BackUp of TM. It's possibl that techtool pro NOT is for Mac os x server 10.6 ?

Confirm User Name = full email address eg: [email protected]
please check for typos, commas instead of full stops etc.
Tools > Account Settings for the account
or
Menu icon > Options > Account Settings for the account
Account name = full email address
Email Address = full email address
Also check Outgoing Server(SMTP)
select the smtp server and check User Name = full email address

Similar Messages

  • I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see spec

    I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

    Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Do let us know if it worked.
    Regards
    Rajshree

  • I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    http://www.synapse-audio.com/

  • Login to server failed. Why?

    I can receive email. When I try to send an email a message says Login to server failed. Verify server settings.
    How do I do that?

    Go to your email provider's website and find out what the settings are supposed to be.
    Go to '''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]'''. Scroll down to the last entry in the list of accounts, "Outgoing Server (SMTP)". Select this, select your mail provider's SMTP server, and review the settings. If there is a disparity, click Edit and amend it as required.

  • I had to re-install Premiere Pro CS5 and now video are files acting funny...

    Hello. I had to reformat my system drive and did a fresh install of Windows 7 Home Premium 64-bit and then I did an anytime upgrade to Windows 7 Professional 64-bit. I then re-installed Premiere Pro CS5. Here's the problem. When I open any of my projects that I worked on BEFORE I re-installed Premiere (when I was using Windows 7 Home Premium), the video files on the timeline all look corrupted when I play the timeline now. They have these weird block artifacts and also a constant pulsing thing going on. I deleted all the media cache files and all the media cache database files but, nothing changed even though Premiere conformed every single video file in the project again. Then, I went to "Sequence" and hit "Render Entire Work Area" and after Premiere was finished rendering, I noticed the artifacts and pulsing are completely gone BUT, the video files look like a VHS tape that has been recorded over a few times. The edges of people and things in focus aren't nice and sharp like they were before I re-installed Premiere. I DO NOT have the time or patience to have to delete all the video files and import them again into the project and re-edit the entire scene! Can someone please help me resolve this problem?! I am about done with Premiere!
    Is there a way to delete the video source files that are on the left side of the timeline (next to the "Source" window, where they got imported into the project) without deleting the edited video files on the timeline and then re-import the same source video files into the project, kind of like "refreshing" the video files? If this is possible, it seems like this would fix the problem without me having to re-edit everything again.
    *Update*  My idea of just re-importing the source video clip won't work either. I deleted one of the source video clips, which deleted its reference clip on the timeline, and I re-imported the video source clip to see if it would play all weird in Premiere and sure enough, it has the same exact block artifacts and pulsing effect like all the other source clips in the project. It seems that if that's the case, it might be a codec problem. But, that doesn't make sense because if I open the clip on my hard drive with Windows Media Player or Allplayer, the clips plays perfectly fine and looks like it is supposed to. So, it must be a codec problem in Premiere??? Could it be that Premiere Pro CS5 doesn't work well with Windows 7 Professional? I find that hard to believe. Can someone please help me?
    By the way, all the video clips in the project are from my Panasonic GH1 or my Panasonic GH2. They are all 1080p/24 AVCHD. I even made a new sequence within the same project making sure the sequence settings are AVCHD 1080p 24 and still nothing is fixed.

    Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
    Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

  • Installing Acrobat Pro 11 and it stops and says close Safari, bat it is not open. //

    installing Acrobat Pro 11 on my Mac and it stops and says to close Safari, but Safari is not open???

    Yes I got the same thing, it stops and says close Safari Notifications, but I've closed them in both my Safari preferences and Notifications preferences...so annoying.

  • Mac Pro (Intel) and OS X Server

    Hi, everyone.
    I'm pretty new to the Mac world. But I've jumped in with both feet. I am now the proud owner of a MacBook Pro and just bought an Intel-based Mac Pro to use as a server for my small business to replace my Linux-based HP server.
    My problem is this: I can't boot from the Mac OS X Server disks that I bought from my Apple reseller. The label on the DVD (I have both DVD & CDs) says:
    Mac OS X Server
    Install DVD
    Version 10.4
    0Z691-5228-A
    Nowhere does it say anything about being for PPC, Intel, Universal, nothing. It is copyrighted 2005 per the label.
    Everytime I try to boot from either the DVD or CD, my machine won't boot from it. I've tried holding down the 'c' key, also holding down the Alt-Apple-P-R keys, but nothing works. I can boot from the Mac OS X disks just fine. And I can get to the install folder from the DVD disk after installation of the regular OS, too. But I'd like to do a clean install of OS X Server, if possible.
    Any help would really be appreciated. Thanks in advance...

    If they knew the server sw was supposed to be for the MacPro that was a rather big mistake. Especially since the UB version haven't been available before the MacPro machines arrived.
    I don't know if OS X Server cost less if bought bundled with the machine - might be the same price as when bought separately:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/
    61114003/wo/0G5SsL7hc6vZ2la1lrVFAcL9u0u/2.?p=0

  • Cannot install Premiere Pro CS6 and Prelude - Losing my mind

    I've been trying for 3 days to find a solution to this problem. I know a lot of other people have had this problem but the solutions all seem different based on the interpretation of the summary report generated by the installer. I've tried dealing with Customer Support over the phone and they have absolutely no idea how to fix this. I've downloaded and installed the CS6 Production Premium. All apps install successfully except for Premiere Pro and Prelude. One option I read was to remove a few Adobe fonts (which I tried) and the problem still exists. Adobe Suport suggested uninstalling then reinstalling Air. Tried it and things still aren't working. I even tried installing in Safe Mode. I'm on a Mac running 10.6.8
    This is the summary:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF015, DW063 ... WARNING: DS013, DW066 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 6 warning(s)
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {CD693E49-C5EF-4FA6-9037-9B636931C02B} AmericanEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {C5CA53A2-E722-4D76-B5AC-71522CC48AB3} AmericanEnglishSpeechAnalysisModels 3.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
    WARNING: DW066: OS requirements not met for {42CED1DA-1C36-45D2-88C0-C32DB6B82B49} Adobe Premiere Pro CS6 6.0.0.0
    WARNING: DW066: OS requirements not met for {D094CE41-D4F5-473E-8915-B1D026CB193E} Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack 6.0.0.0
    ----------- Payload: {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Media Encoder CS6 6.0.0.0 -----------
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Media Encoder CS6/Adobe Media Encoder CS6.app/Contents/Frameworks/AdobeXMP.framework/Resources"(Seq 647)
    ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 647)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Dynamic Link Media Server: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Prelude CS6 Support: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS6: Install failed
    ERROR: DW050:  - Adobe Bridge CS6: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Adobe Prelude CS6_AdobePrelude1en_USLanguagePack: Install failed
    ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed
    ERROR: DW050:  - Adobe Media Encoder CS6: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6 Support: Install failed
    ERROR: DW050:  - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed
    ERROR: DW050:  - Adobe Prelude CS6: Failed due to Language Pack installation failure

    Hi Mylenium. Yes it's me. I didn't want to pull Steve into this just yet hoping that there was an easier solution. I've gone 2 rounds now with Tech Support. The last advice they gave me was to uninstall all Adobe applications from my system, delete all the files that don't get removed when uninstalling (they gave me a whole list), run the Cleaner Tool, log in as the Root user and run the installer again. The same error came up so I'm starting to think that the problem may be more than an Adobe issue. Support told me to call back if the last solution didn't work and they would "send me to the next level". What a pain....

  • MAC installing Acrobat Pro X and Creative Suite 5.5 Design Premium pop up ?

    Hello,
    I have an Acrobat Pro X PKG (for MAC) from the Univeristy that should have a serial number inside the PKG. The installation works well.
    On the Acrobat Pro lauch I saw the main windows, for 2-3 secondes and then it goes a way.  A Creative Suite 5.5 Design Premium pops up  asking me a serial number???
    Thanks for your help

    Thanks for your response, Mylenium.  I finally had time to try this on the weekend, and that cleaned up nearly all the warning messages, but unfortunately it didn't work for Acrobat Pro X.  I also deleted my old CS4 and ran the Cleaner Tool again, just in case that was causing problems. 
    I found this - http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html - and I patiently tried every solution mentioned, but after hours of mucking about with this and trying to install this many times I simply don't know what to do next.   
    The problem appears to be the Conflig.msi folder and I have checked that I have access to this folder right up until I run the CS6 install.  After I get a message saying that I haven't been able to install because it is unable to write to C:Config.msi I go back to that folder and find that my permissions have changed.  It seems to be the install process that changes this - is that possible?
    I'm hoping someone from Adobe Support will read this and respond. It is very hard for me to access live chat as the hours only suit people in the US and I'm in Australia. 
    Lesley

  • Install Project Pro 2013 and Project Pro for Office 365

    Does anyone know if they can be installed side-by-side? From what I can tell it looks like they cannot be installed side-by-side. For example I have a trial version of Project Pro installed, so there's no link in the Start Menu for Project Pro for Office
    365...
    Is there something missing?
    Thanks,
    Roland

    Hi Roland,
    I'm not sure I follow your comment "there's no link in the Start Menu for Project Pro for Office 365".  I successfully ran Project 2010 (MSI) alongside a trial of Project Pro for Office 365.
    Why do you wish to run both side by side?  Have you considered installing one into a virtual machine?

  • I installed Premiere Pro CS6 and do not know where it is located.

    Just like in the topic. I do not know how to run Premiere Pro CS6. Help pls.

    Windows or Mac, part of the Cloud or from the individual purchase link... and other questions
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • I have installed acrobat pro X and can not use search in help, this is the message I get: You don't have permission to access /help/search.html on this server.

    Please send me a solution to my posted problem

    oh yes.. you are right... its accessible in
    http:://rishtey.local/default_1.html
    successfully... thanks for that... first of all
    now issue is: when i access http://rishtey.local/test.php which contains just a tag to display php info only...
    instead of rendering this php file, it just save the file in the download folder.
    what could be the issue with it?

  • Installing techtool deluxe from Applecare Protection Plan DVD fails

    As I was having some problems with my mac, I decided to try the Techtool Deluxe utility that came with the protection plan. But the install fails: it stops at 0 items remaining, uses 100% CPU (or one core), and stays at that for at least 15 minutes - apparently doing nothing.
    I can't find a download from apple support site either - the update page has link to latest version, but I only get a page that points to quick assist page.
    Any ideas on where I can find a downloadable copy (or a form to ask apple for a new copy of the disk)?

    I purchased a MBP in 2008 & an iMac in 2013.  Neither came w/ TTD when I purchased AC.  I am assuming Apple no longer includes TTD w/AC. 
    I purchased TTPro (at a discount) & DW on my own. 

  • Unable to Install the Common Components and Oracle HTTP Server

    I am installing the Hyperion 11.1.2.1.0 in Linux 64 bit server..
    I have done the downloading the files from 1to 7 for Foundation Services and Static client with all Essbase.
    I have unziped the all into one folder and done the installation , but i am not able to install the Oracle HTTP serve and common components.even If i tired to configure the system showing the Below error...
    *Launching the Hyperion Configuration Utility, please wait...*
    *Running preconfig checks...*
    *Running EPM_ORACLE_HOME check...*
    *EPM_ORACLE_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1*
    *JAVA_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1/../jdk160_21*
    *EPM_ORACLE_HOME check succeeded*
    *Running .oracle.products check... .oracle.products check succeeded*
    *Running Jars manifest check...*
    *Time spent for manifests parsing: 606 ms*
    *Maximum jars depth achieved: 6, while restriction was: unrestricted*
    *Parsed 419 manifests*
    *Total jars and classpath entries encountered: 419*
    *Total not-existing referenced classpath entries count: 62*
    *Total classpath elements to check: 59*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jstl_1.2.0.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/share.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/velocity-dep-1.4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/jewt4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/args4j-2.0.9.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
    *FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"*
    *Exiting in 30 seconds"*
    Thanks in Advance
    Rao.

    It may be worth having a read of the following article on Oracle Support - "Epm 11.1.2 Config Tool Fatal Error: "Some Referenced Jars Do Not Exist" [ID 1175585.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Episode Pro Desktop and Final Cut Server ... anyone?

    Hi everyone.
    Has anyone found a way to use Episode Pro Desktop v5 within FCS? I know that the more expensive Episode Engine is compatible with FCS, but there seems to be no reason why the desktop edition (with the Compressor plugin) shouldn't work.
    I've created a number of presets in Compressor that use the Episode plugin, and everything works fine. (I'm encoding to FLV8 and MPEG-2)
    I add those presets to FCS - but the encoding jobs just fail with the message:
    *Error: Missing destination media format*
    and
    *ERROR: EMISSINGPARAM*
    *Wrapper format missing from destination media format*
    Any ideas? It seems to be more of a problem with FCS than Episode. FCS doesn't seem to understand the format of my destination file - which is frustrating, because I don't need it to understand it - I just want it to post the job off to Compressor!
    Apple's FCS website suggests that Episode can easily extend the formats FCS can support:
    Taken from www.apple.com/finalcutserver:
    +"For even more options, you can add the Episode Pro plug-in from Telestream to encode to VC-1, WMV, GXF, and FLV formats, as well as High Profile H.264 and a number of third-party proprietary broadcast server formats."+
    I read that as "Episode Pro plug-in for Compressor" ... and not "you need to spend £4k on Episode Engine" - so it must be possible with the desktop edition ;o)
    FCServer, Episode Pro and Compressor are all running on the same machine.
    Is there something obvious I'm missing? Has anyone got this working? Does this problem also suggest that other Compressor plugins wont work with FCS?
    Thanks,
    Oliver.

    Oli,
    I understand. Keep your eye open for Snow Leopard with Quicktime X that offers [quote] "native support for all common video formats". My guess that will be MXF, WMV, various MP formats will be added along with others for portable devices. Some people disagree with me though stating that Apple would never support competitive formats. Let's see, fact is that the Pro video & broadcast industry is screaming for native MXF support (Major broadcasters are investing in MXF play-out servers) and many corporate CMS builders need WMF because ignorant executives will never understand that quicktime offers the best possibilities. They are just sitting behind their windows machines staring at their Windows Media player. I hope that Apple will at least offer people, that are smart enough to develop in a Quicktime based environment, the native support they deserve for sticking their heads out.
    By the same token, I hope that there will be a Web App soon for review & approve purposes.

Maybe you are looking for