I installed a font (french cursive) into elements 11, and restarted but it's not showing up. It sho
I installed a font (french cursive) into elements 11, and restarted but it's not showing up. It shows up for other programs. What am I doing wrong?
Elements uses the installed system fonts. You install them in the fonts folder. On windows click the start button and type fonts into the search box to find the folder with all your fonts. If you downloaded the cursive fonts in a zip folder you musy first extract (unzip) the files and then copy or drag them into the fonts folder.
If you are still getting problems try downloading from the link at the top of this page:
http://www.specialeducationalneeds.com/accents/schoolfonts.html
Similar Messages
-
Since installing OSX 10, my iMac randomly shuts down and restarts. I can not determine why this is happening. Any ideas?
1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandboxing security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you always stay within a safe harbor of computing practices. How do you know what is safe?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is unsafe.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are outside the safe harbor, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe. For instance, if a web page warns you that Flash is out of date, do not follow an offered link to an update. Go to the Adobe website to download it, if you need it at all.
Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
"FREE WI-FI !!!" networks in public places are unsafe unless you can verify that the network is not a trap (which you probably can't.) Even then, do not download any software or transmit any private information while connected to such a network, regardless of where it seems to come from or go to.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. Most of the real danger comes from highly targeted "zero-day" attacks that are not yet recognized.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
Anti-virus software may be able to tell you which particular trojan it is, but do you care? In practice, there's seldom a reason to use the software unless an institutional policy requires it.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
I have my ipad plugged into my mac to charge, but it's not showing up in itunes. Can i just unplug it without hurting it??
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I plugged in the USB cable into my computer and my ipod is does not show that it is connected what do I do?
See:
iOS: Device not recognized in iTunes for Windows -
Garamond font is turned off when I installed OS X Mavericks. I restored it but it's not showing up in Pages. How do I fix this problem?
Try opening up:
/Applications/Font Book
Scroll to the Garamont Font, then try File > Validate font
If this doesnt work, right click (or control + click) the font and select show in finder. Makes sure it is not located in the /Library/Disabled Fonts/ folder -
I have a G4 Quicksilver running 10.5.8. The OS is on a small HD with no room for adding any info or applications, so I have copied the OS to a much larger HD in an external USB enclosure. I dragged each folder from the small drive to the larger drive. I can access the applications when the large drive is set as an external drive, but when I installed it internally it would not show up on the Start Up Disc utility and I can not boot from it. Did I do something wrong copying the OS? Can anyone tell me how to boot from the larger drive? Thanks
If your machine doesn't support large drives natively (Quicksilver 2002 and later) then doing as you are doing may lead to disaster.
If files are placed on a large drive and those files extend beyond the 128 GB limit of the controller, the first time the drive (internally) accesses data beyond the 128 GB region, the machine will crash and data loss a likely result. -
Ultimately, I am using these photos in a document I am writing and for some reason, some of the photos I have scanned in to iPhoto are not showing as jpeg files . . . the file type is blank and when I try to move them, I get a circle with a slash through it indicating NO instead of the green circle with a + indicating that the photo can be moved and dropped elsewhere. I am using an Epson scanner and am scanning as jpeg images. I also have an option to scan as a jpeg2000 image but am not sure of the difference in the files so continue to scan as just jpeg. Does anybody have an idea as to why these particular files are scanning in as jpegs but apparently there is something not registering correctly. Could it be that they were scanned without doing an overview scan first? I know it can't be that simple . . any help would be appreciated.
What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT -
I have installed Adobe Flash but firefox does not show as plugin
I have downloaded the most recent versions of Firefox (30.0) and Adobe Flash Player. The Adobe website tells me my flash player is installed and current but Firefox does not show it as a plug in and a site that requires flash player (google finance) to view charts does not work. The place for the chart remains blank after telling me it has loaded.
Any thoughts?When a page is using a plugin, usually an icon similar to a piece of Lego appears in the address bar. You can click the logo to check that Flash is allowed to run on the page, or approve it to run if it isn't.
I randomly picked a stock and enlarged the chart and got the following URL. Any luck with this one: http://www.google.com/finance?chdnp=1&chdd=1&chds=1&chdv=1&chvs=maximized&chdeh=0&chfdeh=0&chdet=1405540800000&chddm=1173&chls=IntervalBasedLine&q=NASDAQ%3AAAPL&ntsp=0&fct=big&ei=YJzGU_iiEZSziALE4oCYCg
Does it matter whether you view it in a regular tab or in a private window? To view in a private window, right-click the link > Open Link in New Private Window. -
Can't install Camera RAW 6.3 into Elements 9
I have downloaded the installer for 6.3 but when I go to install it, I get this message. "Some updates failed to install." When it tells me to fix the problems below, all it says is: installation failed!
I need this update in order to open RAW images from my Canon Powershot S95.
I am working with Elements 9 on both an iMac running OS 10.6.8 and onto a new MacBook Pro.
I have spent an hour reading everything I can and haven't been able to find any place to send this question to Adobe by email. The phone system for help has more than a half-hour of wait time.
Can someone figure out this problem?
CherieThank you. I couldn't find the Mac update section at the Adobe site by
using the various search options.
But,
The new download 6.5 installed without trouble. However, the "open with"
command still prompted Elements to respond with an "Unrecognized file type"
error, even though Elements was not listed as the default application.
Trying to open a nef file within Actrobat still showed the nef files grayed
out as unopenable with the application.
I tried to do the manual copying of the camera raw.plugin from the Assets 2
folder as you suggested. H owever it does not appear to be used in the
newer version (6.5). Instead, there is a Profiles directory containing two
further directories: CameraProfiles and LensProfiles.
The CameraProfiles folder contains a series of further folders for various
camera types, and each folder had a number of .dcp files. I can't find a
"camera raw.plugin" anywhere within Assets 2.
So, in sum:
1) The disk image Elements9CameraRaw-6.5-mul-AdobeUpdate downloaded from
Adobe installs correctly.
2) The default program type for .nef files was changed to Elements
3) Elements will not open a .nef file either from "open with" or within the
application selecting open from the menu.
Hoping you can help me work around this problem.
Thank you.
Rick Connolly
In a message dated 5/2/2012 7:43:32 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Can't install Camera RAW 6.3 into Elements 9
created by Barbara B. (http://forums.adobe.com/people/Barbara+B.) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4375630#4375630) -
I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results. -
I edited clips and then re uploaded the rendered versions into the organizer and now the thumbnails aren't showing up. how do i generate the thumbnails?
neuron113
Thanks for the reply with the very helpful details.
Export from Premiere Elements 12/12.1 Publish+Share/Computer/MPEG with Presets = HDTV 1080p29.97 High Quality
I suspect that we are in a no win situation here - an Elements Organizer 12 issue.
With Elements Organizer 11, 10, and 9, I can bring your MPEG2.mpg into the Elements Organizer with thumbnail with
image. I cannot for Elements 12. And, I am working with the same MPEG2.mpg in Elements Organizer 9.0/9.0.1, 10, 11,
and 12 on the same computer. In the morning, I will look Elements Organizer 13 as well.
In my work with 12, this MPEG2.mpg consistently crashed the Elements Organizer 12.
It is difficult to explain these results by invoking a missing codec theory since all was done with the same sample on the
same computer.
More later.
ATR -
After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!
I have signed out then back into the cloud. I have comfirmed location of the photostream folder. I have have even restored settings on my phone. any ideas on what I can do to get it working again? or do I have to accept defect, and manually save my photos?There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem? I can see my photos on my ipad and Iphone. I want to be able to see them on my PC when I take pictures from my Iphone and Ipad. How do I see Photostream on my PC?
You have to install the iCloud control panel for windows, then sign in with you apple ID, and check what you want to sync.
link: http://support.apple.com/kb/DL1455
Maybe you are looking for
-
I'm trying to figure out how to get QuickTime movies (taken with a video camera) off my pc and onto my iPad2. I can watch the movies on my pc using QT. I bought QT Pro and installed on my PC to convert the files to a format that iPad supports (like
-
Change journal creation on Delivery Order
Current inventory valuation method is Moving Average. Current journal created from SAP when delivery order is : 5010010-01-01-99 Cost of Sales - Products (ID,TW,UA) 1,700 1510100-01-99-99 Products (ID,UA,UA)
-
This is my first time posting EVER on apple and I can't seem to find a solution to this issue through google or these forums. My iphone 5c working perfectly fine suddenly when ever I connect it to my computer keeps saying it cannot connect that I nee
-
I can't install Acrobat 9 on a new computer; it says my serial number is wrong
I de-authorized my subscription from an older computer & want to set up Adobe Acrobat 9 Pro on a new, windows 7 computer. I believe I downloaded the correct software, but when I go to enter the serial number it tells me I have the wrong number. Help
-
How to add photo from Photos app as iCloud/user avatar?
Hello, I would like to change my login and iCloud user avatar. I have photos in the new Photos app, but I can't import or drag&drop files on the settings screen from Photos. "Take a photo with your iOS device or manually add photos from the Photos ap