I installed a rcomended update of idt high definition audio codec and now my audio is dead

i installed a rcomended update of idt high definition audio codec and now my audio is dead

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

No windows sound after updating the IDT High definition Codec!! HELP!!!

Hi all
I really need ur help now
I have updated IDT High Definitio Audio Codec several days ago
after i reboot my notebook, I couldn't hear my windows sound anymore
than i reboot till 2 times, n the windows sounds was heard again
However, after I turn it on the next day, i found that i have no windows sounds again
but i can play media players, such as winamp, n could hear msn sound
After i reboot my PC, the sound was heard. But after turning it on for the 2nd times, i couldn't hear the windows sound again!!!
Help me please
How could I fix this?
I have rollback driver, but i doesn't work. Coz before updating IDT audio by windows update, I have updated IDT audio through HP support assistant
N i am a little bit afraid of doing system restore...
PLEASE HELP ME
THX

Hi,
Download correct audio driver.
How to find it on HP sites?
1. Click on Support & Drivers link. (Upper part of this page.)
2. Choose option: Download drivers and software (and firmware)
3. In form:
Enter a product name / number
For product provide Your p/n. (How to find correct p/n informations here.)
4. Click on Go and choose system which You are using now.
Disconnect from Internet.
Uninstall from Your system IDT audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers
and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install this driver which You downloaded.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

HP Elitebook 8560p driver update error: IDT High Definition (HD) Audio Driver

Hi there,
Hoping someone can help..
So I tried updating/installing the latest IDT Audio driver for my Elitebook 8560p, but get this error each time:
I'm pretty sure this is because I stupidly uninstalled IDT soon after getting the laptop.. I did this because I use a seperate audio interface for recording music and didn't want any conflicts. I didn't realize uninstalling this would disable the internal audio entirely (and irreversibly it seems)! My audio still works when I connect my external audio interface, but this is quite annoying as I have to bring the interface with me everywhere, like I can't just watch a Youtube video and listen through internal speaker OR headphone output..I have to hook it up to my interface each time..urgh. My own fault I know, but I would have thought this driver installation package would work and put it back on my system..
FYI, I'm running Windows 7 Home Premium 64bit.
I remember reading a thread about this eact same problem ages ago, someone had done the same thing and was having the same problem re-enabling//re-installing it. I think he managed to find a fix that worked for him that involved removing the battery and holding the power button for 30 seconds, or something along those lines.. I remember trying that method by copying his instructions step-by-step, but it didn't work for me
Anyone else, or any HP tech support know any kind of fix for this? Fingers crosed.
Many thanks for any help or advice in advance!
Lauren

Hi
Try installing the driver from the link given Accept the license agreement below restart the unit check in device manager if the driver is detected. Also update the Bios restart the unit and check.
Link
Bios
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Why am i getting error messages after I installed the latest update? I am running Windows 7 and now getting error 7 . It tells me to reinstall I tunes which didn't help

Help please

Hello mamdonde,
The following article provides steps that can help resolve this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..

I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.

You need to continue with the Recovery...
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... After the successful Recovery... Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

How to fix enhancements for speakers and headphones IDT high definition audio CODEC

I received a Windows message indicating "Windows has detected enhancements for the following are causing problems. Speakers & Headphones IDT High Definition Audeo CODEC.
How can I correct this?
fasteddie0717

Did you install a third party CODEC?
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IDT High Definition (HD) Audio Driver problem after windows 8.1 update 1.

Hello. I have HP Probook 4730s. After I installed Windows 8.1 update 1 the sound driver stopped working properly. When I want to play some music, video or even system sounds, sound appears after 1-2 minutes. At that time HDD usage is 100% cause of windows audio device graph isolation. I’ve installed that IDT High Definition (HD) Audio Driver from HP’s driver support site, but that’s not working. As I see in device manager driver’s release date is 24.10.2012. I think, it’s too old for Windows 8.1. Can you help me? Is there any other newer version of that sound driver? Also I’m sending two pictures where are HDD usage and driver release date.

Hello GDartsimelia,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after you installed Windows 8.1 on your notebook computer, the sound driver stopped working properly, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

No Sound after updating IDT High Definition Audio Codec on my HP Pavilion dv6-6154tx laptop

I recently ran Advanced Driver Update to check and updated my audio driver (IDT High Definition Audio Codec) on my Windows 7 laptop. However, after the update, every time I boot up the computer, there is no audio output. I checked the volume control options and they are all fine, showing "all devices are playing sound". But there is no sound. Even the 'test sound' option does not play any audio, although the computer says that it is working fine. I read some posts on this forum and came across an answer - to uninstall the current driver from Device Manager, and manually install IDT HD Audio Driver for Windows. This works and I am able to get back the sound. However, I have to do this every time I start my computer after shutting it down, and this is proving cumbersome. Can somebody please help me with this and suggest a solution? Thanks.

Hi @Harkri ,
I have brought your issue to the appropriate team within HP. They will need to get information from you to look up your case details or serial number. Please look for a private message.
If you are unfamiliar with how the Forum's private message capability works, you can learn about it here
Regards,
George
I work for HP

Windows 10 IDT High Definition Audio Codec doesn't work properly on Hp Envy 20d001-la after update

I'm using a Windows 10 just updated pc, Hp Envy 20 d001la, and I'm having problems with my speakers, they work with IDT High Definition Audio Codec driver. It has beatsAudio available, but the bass don't sound the right way, I can barely hear it. It has a low quality sound... the worst quality. This problem isn't new for me, when upgraded to Windows 8.1, also the problem apeared, when the driver released with a new version, specificly for Windows 8.1, but how did I solve it? I only installed the Original Audio Controller found on Hp Support & drivers page (It was designed for work on Windows 8 64 bits). So, I know Windows 10 is newer than ever, and sure of some bugs or little corrections after updating. But when I try to install the Windows 8 Original controller to get the extreme sound quality again, it can't be installed. The problem says: "Operating system doesn't has the requirements" The new drivers have low sound quality (driver Windows 8.1 & Windows 10 versions) If I could install the Windows 8 version driver, I'm sure the sound quality returns. Thanks in advance.

Hi! Thanks a lot, I've tried the solution you've given me, (extracted the setup file with winrar on a folder and search for the driver as you said) but an error message shows: "There are not compatible drivers on the selected folder, try with one for Windows x64" It happens with both drivers I have, W8 & W8.1 versions. And also I have other problem, I didn't connect the headphones when trying solving the problem, and when I connected them, a surprise: The speakers didn't shutdown, they continue playing sounds and the headphones and speakers were playing sound at the same time. I've checked for the internal connector and The connector is clean. Then I tried to install W8.0 IDT setup manually clicking on the files extracted, the process finished succesfully, and system restarted, the sound quality came again, but still when I connect the headphones, the speakers don't shutdown and sometimes music stops. The problem is with all versions of driver I tried, the W10 got by Windows update, the found on Device Manager, the W8 , W8.1installed manually, But not worked.I hope in a future upade the problem could be solved, because I listen to music always only on headphones to avoid disturb others. Thanks, I'm trying a new method if is kanown for you. Thanks a lot.

L channel sound comes through both L and R speakers after installing IDT High Definition Audio Codec

I noticed a sound problem on my laptop. The R channel works as expected but the L channel is split between the L and R speakers. After checking several different possibilities I narrowed the problem down to the IDT High Definition Audio Codec that I downloaded from the HP driver support page for my notebook model and operating system.
I uninstalled the IDT High Definition Audio Codec and restarted. This forced Windows to resort to using its generic "HD Audio Device" default. When I did this the sound was equally split between the L and R speakers as I would expect - L channel 100% though L speaker, R channel 100% though R speaker. I then re-downloaded the IDT High Definition Audio Codec from HP (sp59654.exe), re-installed it, and restarted. Immediately the sound problem was back - while the R channel comes 100% though the R speaker, the L channel is split between L and R speakers.
Please note this has nothing to do with adjusting speaker "balance". Both L and R channel volumes were set to 100% while investigating this problem. It's definitely some sort of incompatibilty between the IDT High Definition Audio Codec and Windows 8 64-bit or the sound hardware in the HP Envy DV6.
Here are my details:
IDT High Definition Audio Codec
Publisher: IDT
Date: 8/19/2012
Version: 6.10.6425.0
Notebook
HP Envy DV6-7200
Windows 8 64-bit

Here is what I would recommend you trying. Go to device manager and uninstall the audio driver. Once it is uninstalled, go to the device manager toolbar and select "Scan for hardware changes". After it completes, reboot the computer. Once the computer is rebooted, test the audio and let me know if that helped.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Dv5-1126em Entertainment Notebook PC IDT High-Definition Audio CODEC Driver can not be updated

dv5-1126em Entertainment Notebook PC IDT High-Definition Audio CODEC Driver can not be updated the system says that your computer has a sound device problem and cant play multiple sound in my pc

I want the sound of the original dv5-1126em
All that on-site works strange noises as if from outer space, my friend works noise and hassle
Please correct some of them sir

Cannot Install IDT High Definition Audio Codec

I have a HP ENVY 15-3090ca Notebook PC that will not download IDT High Definition Audio CODEC, it had it before, but I had to reinstall after a failure of recieving audio. When using my sound mixer it DID say it was coming from the IDT Audio CODEC, now i cannot successfully install it and can't recieve and audio until i do.
Product name: HP ENVY 15 Notebook PC
Product number: A7H00UAR#ABC
(Windows 8.1 x64)
This question was solved.
View Solution.

Hi,
The above link shows driver for Windows 8 only. Please try the following package for Windows 8.1:
http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64878.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IDT High Definition cannot be installed

Hi, I just downloaded windows 8.1 last week and my audio is not working after that. I cannot installed IDT High Definition because it says "The hardware detected is not supported by this IDT software package. The install will be aborted." I called HP support but they couldn't fix it too. I have a feeling this notebook "Pavilion Sleekbook" is not compatible with windows 8.1 therefore I can't download the driver. If anyone had this problem and solved, please help me. I have spent nearly 1 week for this and no way out.

Hi,
What is the model/product of your Sleekbook ? My suggestion, uninstall audio driver and reboot the machine when connect to the internet. Hope it will find the right driver for you, otherwise please post back what is your machine. Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Probook 4530s IDT High Definition Audio Codec Speakers

As the title states:
HP Probook 4530s
Windows 7 OS
IDT High Definition Audio Codec
The laptop quit playing through it's speakers, but will play through the headphone jacks when plugged in. Tolerated it for about 8 months now. Recently, while playing with it I noticed that if the System is set to headphones and you double click on the slider it begins to play through the laptop speakers for approximately 1 second. You have to keep double clicking to maintain sound through the speakers.
Now, when I go to Speakers/HP Properties it shows that the sound is to the bottom 3.5mm jack & front 3.5mm jack. This laptop has NO bottom 3.5mm jack on it, only the front 3.5mm jack.
I have tried uninstalling and reinstalling, looked for new drivers and thought about installing an old driver but not sure how far back to go. Any suggestions would be a great help here. If you need more info please let me know what you need and where to find it and I'll provide it. Now that I know the speakers actually do work, I'd love to be able to use them again.

Now to help out with troubleshooting this here is a pic and what I think is going on:
Notice that the jacks are allegedly on the bottom and front for the speakers, only issue is there is no jack on the bottom and the front jack is for the headphones. the 10-18-2012 update that HP is tossing around ignores the fact that there is no bottom jack for the HP 4530s, g7, pavilion and dv7. I've had all of these over the years. It seems someone wrote a driver that is one size fits all and totally missed that these speakers are located someplace else.
So the question is, how do we reassign the location so it puts sound to the speakers?

CP4 / Windows 7 / IDT High Definition Audio CODEC / No worky

Hi,
I just got a new laptop with Windows 7 which has a IDT High Definition Audio CODEC sound card.
I got Captivate 4 installed and seemly working great... UNTIL I go to record the voice over. It doesn't recognize my microphone. It's not that the sound quality is bad - it just doesn't record at all. No green or red appear when calibrating input.
I checked and set volume in the sound control panel and it works there.
I tried to record with Soundbooth and had the same problem. Doesn't recognize it. Tired all available drop downs, line in, microphone etc.
I'm not sure what to do next.
Anyone run into this before or have any ideas about how to solve this?
Many thanks,
Aimee

FYI - for others who may experience this problem with Win7
This problem was resolved by a combination of steps.
1) updating the driver on the sound card to a Win7 compatible
2) replacing the .dll file in the captivate installation folder (see http://blogs.adobe.com/captivate/2009/03/audio_play_back_and_usb_mic_is.html)
I thought the updated .dll file by now would be a part of the CP4 patch but it isn't - so if you experience this problem you need both apply the patch and replace the .dll file.
Thanks,
Aimee

I installed a rcomended update of idt high definition audio codec and now my audio is dead

Similar Messages

Maybe you are looking for