I installed Captivate 6 on Mac OSX v 10.9.1 but it wont start. Ive updated it, but it still wont run

I installed Captivate 6 on Mac OSX v 10.9.1 but it wont start. Ive updated it, but it still wont run. Any ideas?

Hi, I'm using the version that came on the CD - 6.0
Here is what I have done so far:
1. Run the install disk
2. Activated the serial number - you can see that on my account
3. Installed the software.
I tried to run it, but when I do I get the follwoing message
4. I then tried to run the Adobe Application Manager and it crashed, here is a screen shot
5. I clicked the reopen button and it starts.
6. I downloaded the update, but it still wont run.
7. When I finally get the Application Manager to run again I get this message.
8. Then I retsarted my laptop.
8. I uninstalled the software, reinstalled it, did the updates again, restarted it and it still won't work.
Here is the info about my Mac
What should I do now?
Terry

Similar Messages

Can't install flashplayer on Mac OSX v.10.6.8

Can't install flashplayer on Mac OSX v.10.6.8 I get "missing plug-in" message whenever I try to run a clip. Nothing will run--utube, news clips, nothing. I have uninstalled and then reinstalled flashplayer. what do I need to do???

Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
If it won't download directly, right click and "Save as"
Go to: Mac HD/Library/Internet Plugins
Trash the Flash Player.plugin file from there
Go to: Mac HD/Library/Application Support/Adobe
Trash the Flash Player folder (the whole folder)
Empty the trash
Reboot
Mount the DMG and run the installer.
BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

g -
I was able to fix the problem with some help from Apple. Whenever I last downloaded Reader, I apparently didn’t complete the process by accepting the Reader contract. I was able to go right to that point in the process and complete the installation. The messages that I needed Reader but it was already installed were quite confusing. It would have been nice if the Adobe installation process that I was re-trying this morning had been able to detect a partial installation. The Troubleshooting page almost had me doing some ridiculous things that wouldn’t have helped.
MP

How to install freehand on Mac OSX 10.8 operating system

How to install freehand on Mac OSX 10.8 operating system

soniamp wrote:
How to install freehand on Mac OSX 10.8 operating system
1. Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showthread.php?t=1365439
2. Adobe's official patch for Freehand MX to run in Snow Leopard:
http://helpx.adobe.com/freehand/kb/cant-launch-freehand-mx-mac.html
Freehand MX running in Snow Leopard Server installed in Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]

IMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.

iMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.

Your Mac is definitely one of the supported models? http://www.apple.com/uk/osx/specs/
If so, what happens when you try to download? Is it a case of nothing happens? If so, take a look at the suggestions under 'Stalled Download' in this link:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, some usrs have found that logging out of the Mac App Store and then back in again and starting over has kick-started the download. It seems that the 5+gb download can take a long time to give any feedback as to what's happening.

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Update Not Verified?

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Getting a message half way through the download stating the updated "could not be verified. It may have been corrupted during downloading." Any ideas for picking up the latest Update?
Uploading screenshot.... any advice appreciated.
Matt

Either try redownloading or try downloading the standalone updater: OS X Lion Update 10.7.4 (Client Combo).
Such errors may be caused by glitches in your Internet connection or because of hard drive problems. I suggest you try the following:
Repair the Hard Drive and Permissions - Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.

Where to install Thunderbird on Mac OSX for multiple users.

Hello,
I would like to install the email program Mozilla Thunderbird on my Mac OSX (10.4.6) computer which is set up with several different user accounts. I am not sure where to install it so that everyone may be able to use it. I would like to install it once so that everyone may use it rather than installing it multiple times (once for each user).
As you might already know, in Mac OSX when you install a program in the main applications folder, it is available for everyone who uses the computer (available to all accounts). However, the trouble is, that although the actual Thunderbird program is available to all users the profile is not. The profile obviously is an important component of the Thunderbird mail program as it contains all the actual mail messages. When Thunderbird is installed, by default the profile folder is placed in the users home Library folder at:
users home folder/Library/Thunderbird/Profiles/<Profile name>/
This location make it impossible for other users to access the profile and therefore Thunderbird will not work for the other users.
What should I do?
I have a couple solutions, however I would like to ask for some advice on what others do in this situation which I am sure is fairly common.
Here are my solutions:
1. Move the profile folder to a custom location that is accessible by all users in OSX such as the global Library folder (rather than the user's Library folder). Path of global Library folder:
/library/
Then let Thunderbird know it was moved to this custom location using Thunderbird's profile manager.
2. Try to figure out a way in mac OSX that allows the profile folder at this default location:
users home folder/Library/Thunderbird/Profiles/<Profile name>/
to be accessible by all users.
Ownership and permissions need to be changed for the profile folder maybe?
3. Install thunderbird multiple times - once for each user - each with their own profile. The problem with this is then there will be multiple installations of the same program and they will not be able to share the same profile folder - which is what I would like to do - if possible.
I have a feeling that solution 1 is the more logical solution.
PS I am using Mac OS 10.4.6 (Tiger) with Thunderbird 1.5.0.4
Thanks for any advice.

Yup, its me again Always seem to have a question for the group
Thanks Mulder and Scott! I am sure glad I asked for your advice. I am completely new to the multi-user environment of OSX - as you can tell. (I guess I am still in OS9 thinking mode where there was only one user.)
Scott wrote:
"Mail can be configured to download any new email, but not remove it from the server until it is removed from the Mail application. This way, the email can be downloaded to multiple clients across multiple accounts."
Interesting. Thanks for pointing this out Scott. Good to know. This would seem to me to be similar to IMAP in some ways. This would be a good way to work in a multi-user environment. This is good info to be aware of.
It sounds like an interesting way to work.
Thanks to both of you for steering me aware from the difficulty of attempting to place the profile folder outside the home directory. This sounds like it would have been more work than necessary.
Why am I not using Apple's Mail program? Good question. I thought I would try out Thunderbird for a while - and maybe switch to Apple Mail later - just to see which one I prefer. I am a web developer and I have always liked the open source community and I thought it would be beneficial for me to become as familiar as possible with all the Mozilla products (Firefox and Thunderbird). As well, it keeps me somewhat on the same wavelength as my PC friends, of whom many use this program too. I don't want to be too much out of touch with my mac. I might try Mail later. Thunderbird has been great so far. It has excellent spam recognition abilities and you can train it too to detect spam.
Scott the "Family account" idea is an awesome idea. Thanks.
I have learned a lot from this post. This gives me a few logical solutions. As Mulder points out it is best to keep users' profiles separate. This makes it simpler. Excellent advice. I could still install the Thunderbird application in the global application folder and then each user account can open this Thunderbird application from their own account and configure the mail client with their own profile. All users will be using the same Thunderbird application but with their own profiles. Yes, thats it. I tried this out and it seems to work now - didn't seem to work earlier because I didn't know what I was doing
Another idea could be, if I really need to share one single profile, would be to follow Scotts advice and just set up a "Family account". Very simple solution. Nice idea.
So, those are the two top solutions.
Furthermore, I could use a mix of both strategies. For mail accounts that could be shared ([email protected]) I could create a "Family account" in OSX, as Scott detailed above, and then for mail accounts that are for each individual user ([email protected]), I could be sure they have separate profiles as detailed in Mulder's post.
Thanks for all these helpful ideas!

I installed iousb family log release osx 10.5.6 and installed on my mac osx 10.5.8. I am trying to log and rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way 2 get my usb back?

I installed IOUSB family log release osx 10.5.6 on my mac osx 10.5.8. I am trying to log an rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way to get my usb back working? And is there a way to navigate in Windows to the file I installed and remove it? Any help appreciated.

BDAqua wrote: Does OSX boot at all, or not?
Yes, it does. Right to where I am supposed to log in, but since the USB is not working (either mouse or keyboard), I'm stuck. I have to shut down and restart and boot into windows.

Illustrator CS5 Instalation Problem on Mac OSX 10.5.8

I have tried instaling this software multiple times and am getting errors in the program that reinstalling doesn't seem to fix.
Here are the errors I'm getting:
When opening a new document, I get the error: "Can't locate the Startup Profiles. Please try after installing Illustrator again. Illustrator will now attempt to create a default document"
When quitting Illustrator, I get the error: "The Application Adobe Illustrator CS5 quit unexpectedly after it was relaunched. Mac OSX and other applications are not affected. Click relaunch to launch the application again. Click Report to see more details or to send a report to Apple"
I saved the report in case this is needed.
After browsing user forums, I attempted to reinstall using the following steps:
1) Before attempting any reinstallation, I deleted the folder drive/users/username/library/Preferences/Adobe Illustrator CS5 Settings/
2) Unstalled Illustrator using the uninstaller package that comes with Illustrator.
3) Removed shortcut from menu
4) Reinstalled Software.
Please advise.
Thanks,
Mike Bryant
Laboratory for Atmospheric and Space Physics

After downloading CS5 I ran into multiple permissions errors, this is no exception.
The following folder needs Read & Write access:
Macintosh HD:Users:(Your User Name):Library:Application Support:Adobe:Adobe Illustrator CS5
You can change this access by selecting "Get Info" on this folder, then adjust the Sharing & Permissions options so everyone can Read & Write.
NOTE: This addresses the startup profiles only; crashing on quit is a separate issue.
When you open up Illustrator this time and try to create a new document, Adobe magically creates a "en_US" folder within the Adobe Illustrator CS5 folder that couldn't be added before.
Mac OSX 10.5.8

Can't install windows to mac osx partition!

Hi, I had 2 partitions in my macbook pro, 1 for mac osx and 1 for bootcamp, and I wanted to install mac osx to a firewire hard drive, but i messed it up and installed mac osx OVER the bootcamp partition.
Now I have 2 mac osx partitions on the macbook pro, and can't reformat the partition to reinstall bootcamp.
Is there a way to reformat that partition and reinstall bootcamp (windows)?
Thanks in advance!

That is why backup should be #1 and last.
You have to return (ie, reformat) your drive probably back to one partition with just Mac OS before you can use Boot Camp Assistant.
While at it, just clone one of your Mac OS volumes over to FW now. Later, with Windows installed, make an image of that (WinClone) while in Mac OS to your FW drive also.

From where to download and install applications for MAC-OSX.

hello everyone,
I am trying to develop experimental HLS server and for that i need following cmd-line tools for my MAC-OSX-10.6.8.
I have read some where that these tools are there from OSX version number 10.6 but I have only "mediastreamsegmenter"command on my MAC machine.
I am very new to MAC environment and I don't know how to download/install new libraries and applications for MAC.
Can someone please provide some help,
from where to download and install these cmd-line tools?
I need following tools:
1. mediastreamsegmenter
2. mediafilesegmenter
3. mediastreamvalidator.
4. variantplaylistcreator
Thanks

Maybe this http://stackoverflow.com/questions/2973411/implementing-apples-http-live-streami ng-problem-with-mediafilesegmenter-tool can help you.
Stefan

Install problem on Mac osx 10.6.8

Hello ... I would like to install the update at Mavericks, I own a Mac Pro 2008già upgraded to Snow Leopard, I made regular access to the Apple store and downloaded the free upgrade to 'Mavericks', when I click on the installer execute the instructions, but so far as to choose which disk to install it I do not enable the main disk 'Macintosh HD:
how can I solve this problem? ... how can I enable the primary disk to install Mac osx Mavericks? ... thanks for the reply

I apologize but I have found that the properties mentioned by you are correct, I attach images of the characteristics...
LIST OF HD INSTALLED
HARD DISK INFORMATION
same thing for the GUID partition map
the only thing I do not understand is the presence of this disk off:
thanks for the reply

HT2347 Installing inkscape on mac osx 10.6

I downloaded the Inkscape, and it seems to be a mirror image, so I think it is not installing but it also does not work. I think it has to do with my mac being an older version (mac a1181 2.4/2x 1G/ 160) with mac osX 10.6 but the version of iinkscape is the latest I think (0.48.2-1-snowleopard.dmg)

I'd suggest you take this up in the Inkscape forums; you'll be more likely to get help there:
http://www.inkscapeforum.com
Regards.

Downloading and Installing SAPGUI for Mac OSX

First of all I want to say, that this site has the most un-intuitive interface and complicated navigation system I have ever encountered. Was it so difficult to create an easy to access download area for all the GUI's to be accessed and downloaded along with detailed instructions on how to install them?
Sigh.
That being said, I would like some help downloading the SAPGUI for Mac. I know its the java, which can be installed Platform independent. When I go to the download site, and I get to the basket portion it doesnt let me download it. It asks me for my credentials (the same ones I had to use to post in here) and then it knocks out my connection and doesnt let me download.
Secondly I would like also the steps I need to do to install the .jar file on a Mac running 10.6.8. I found a .jar file elsewhere but it runs with errors and doesnt let me get to the familiar interface for configuring SAP.
When I run the .jar file on the mac I get the following error:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03 Java HotSpot(TM) Client VM
User home directory = C:\Users\palaugi
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
java.lang.reflect.InvocationTargetException
     at com.sun.deploy.util.DeployAWTUtil.invokeAndWait(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.runOnEDT(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.security.AccessControlException: access denied (java.util.PropertyPermission com.sap.platin.productType read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at com.sap.platin.micro.Version.guessVersionType(Version.java:244)
     at com.sap.platin.GuiAppletBase2.findProductType(GuiAppletBase2.java:336)
     at com.sap.platin.GuiApplet2.getProductType(GuiApplet2.java:18)
     at com.sap.platin.GuiAppletBase2.<init>(GuiAppletBase2.java:54)
     at com.sap.platin.GuiApplet2.<init>(GuiApplet2.java:14)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.awt.EventQueue$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Exception: java.lang.reflect.InvocationTargetException
I am not a SAP expert, and no one in my company knows how to work the technical side of SAP on this platform, so I am trying to install and configure this for them so they are able to work.
Thanks!

Hello,
doing a search for "SAPGUI for Java" with your favorite search engine should include the site SAP GUI Family in the top ten of the result list.
This site includes links to navigate directly to the [downloads|SAP GUI Family#section31] of both SAP GUI for Windows and SAP GUI for Java.
On the [same page|SAP GUI Family#section16], there is a [link|SAP GUI Family?rid=/library/uuid/f0dcf725-6b0e-2d10-da9a-96eb3474bdd3] to the online version of the manual which is included with SAP GUI for Java.
Your problem downloading the installer might be related to permissions, please refer to [note 1037574|https://service.sap.com/sap/support/notes/1037574] .
Regarding your problem running SAP GUI for Java
I do not understand "When I run the .jar file". From the stack of the Java console, it looks like your are trying to start it in the browser and the version on the web server and the one installed on your Mac do not match (see "Incompatible Certificates" in the known issues section of the manual coming with SAP GUI for Java).
Once you have downloaded a current SAP GUI for Java version and still have issues using it, please provide more information about your scenario.
Best regards
Rolf-Martin

I can't get FLASH to Instal on my MAC OSX 10.8.5 Beyand Frustrating!

I have tried several times over the past 36 months to get the updates version of FLASH to install on my MAC. It just won't do it. I have gone to the Adobe Trouble shooting guide and followed all the steps. Please help. I am beyond frustrated!!!!!

I did all that stuff that is referenced in Installation problems | Flash Player | Mac?
I have no idea what a "Log File" is.....so I would have an easier flying to the Moon than figure that out.
What occurs is this:
1) I download the Adobe Flash Player Installer
2) I start the Install
3) I ALWAYS get the same message at roughly 82% Install: "Error: General Installation Error".
This is the same thing that happens over and over. I have done everything that is referenced in the Installation problems | Flash Player | Mac post.
On another note, I have ALWAYS been able to ib=nstall FLASH on every update up until about 6 months ago. I know my original Post said "the past 36 months", but I meant to say the past 6 months.
Thanks,
Sam
It is the same failure every time.
Thanks,
Sam
Sam Sharpe
Virtual Tours Of Charlotte
The Fusion of Vision and Light
704.905.4722
www.VTC-Home.com

I installed Captivate 6 on Mac OSX v 10.9.1 but it wont start. Ive updated it, but it still wont run

Similar Messages

Maybe you are looking for