I installed dreamweaver on Windows. After installing it, it blocks my access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.
I installed dreamweaver on Windows. After installing it, it blocks my access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.
See iPhone DFU mode explained, and how to enter DFU mode.
Similar Messages
-
hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.
Hi,
usually when you upgrade, it should not delete your files, but if it happens, than you should have a backup.
Unfortunately it is very common, that people don't know, what exactly is in the backup.
The question is, what files exactly you are missing? Own pictures, or taken with the device? Purchased music form the iTunes Store, or own? ....
Documents and files are mostly up to the developer of the app, if they are part of the backup, usually not and you need to transfer them before.
In the backup you will find just pictures from the Camera Rolle folder, everything else you should have on the PC, if you had it on the device.
Same then for music, you can transfer purchased music from the device, but your own works just one direction, from PC to device, from device to PC it doesn't work.
In future I recomand you to be sure how the backup works or use a 3rd party app (iExplorer) where you have a little bit more "freedome" than with iTunes.
Or you maybe just restored from the worng backup -
Will effect software to be erase in windows after install Leopard?
Any idea will effect those software are installed will be erased in windows section? like have to reinstall back all the software again or reformat the windows after installed the Leopard? Please advise if somebody know about it. Thank you in advance.
Installing Mac OS X 10.5 will not erase the Windows partition or anything on it; only using the Disk Utility to erase the partition or repartition the drive will.
(26114) -
I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?
What DVDs are this ?
If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
Boot Camp 3.0, Mac OS X 10.6 FAQ
Frequently asked questions about Lion and Boot Camp 4.0
Stefan -
Problem Installing Lookout 6.1 After Install/Uninstall Lookout 6.5
I'm getting the message "You have a higher version of NI Uninstaller in your system" when I was trying to re-install Lookout 6.1 after installing and uninstalling Lookout 6.5.
The error says for me to uninstall the higher version of NI Uninstaller? Where and how do I do this?
Thanks,
MaxI'm running Windows 7 Professional (64 bit)
1) This is the error I get when installing Lookout 6.5
I then select "Yes" to continue, choose "evaluation mode" and let it complete the install, restart computer and run Lookout 6.5.
But Lookout 6.5 does not run and I get the following error:
2) Now I try and install Lookout 6.1, the part where it is initializing the installer completes and I click on "Next"
I go through with the information input for user/company/serial, select complete install, license agreement and then click next and I get the following error:
And now I am at the problem.
So I click on Yes (to continue) and I get the following error:
and I continue and get the next error
and so on...
Thanks for your help. I'm almost short of formattimg the drive and reinstalling the entire system but I'm hoping it's just a minor item that was overlooked. -
Can anyone help me pls. , I deleted an app on my Ipod Touch, and It was deleted but when I connected my device on my computer and went to iTunes>"apps" , I still saw the app I deleted and it says "install" . Guys, how will I delete it permanently? May you Pls help me. Thanks
Just don't click install
-
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!
Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen. -
I tried to reset my iphone5, the reset loading was okay, but after that there is other loading(the one that come everytime after shutting down), so its about 6-7 hours that my phone is stuck on this page. force shutdown didnt work.
There are many ways to do a reset on an iPhone so which one have you been trying that has got you to where you are now?
-
Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?
Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure. -
After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU. How can I get the video app working with the iTunesU again?
I have a similar problem with ITunesU, I used to be able to access them from my car dock, but now they dont appear and the fwd/back buttons on the steering wheel wont affect them.
It seems taking them from ITunes into their own app has confused many other applications or dock connectors. Im going to try and remove the ITunesU app as I dont want to have lost the extra functionality -
after ios 5 the ipod that changed to music shows all my songs but they are greyed out and will not play
did uncheck all music and resynced afterwards. Got all my music back on the phone. Next morning, the phone had greyed out 1/3 of the songs all by itself. Seems to have something to do with syncing over wifi. No solution yet other than resyncing all my playlists one by one,
Combined with a battery that drained 5% every 5 minute before I reset the network settings, I am not impressed with Apple's premature launch of their new os. This is what beta testing is for, folks. The iPhone should be done with the growing pains. Shame.
(iPhone4 upgraded to ios5) -
MSI GE620 can't boot to windows after installing CoreCenter 2.0.6.8
I have made a very huge mistake by installing an overclocking software without knowing anything about overclocking :(
Here is what I have done
- I installed CoreCenter version 2.0.6.8, after the installation finished it ask me to reboot the system, so I reboot.
- First my system won't shutdown it tell be that S-Bar (an toolbar that come with my GE 620 laptop) prevent me from shutdown, so I hit force shutdown. Then the system started to shutdown but it stuck at windows logo (Shutting down screen) so I hold down the power button to force turn off
- Windows gives me an option to boot into safe mode (because I hold down the power button and it is unexpected shutdown), I hit start Windows normally
- It goes into a Windows logo screen like normal, but it won't boot. It's just stuck at the Windows logo screen. At this time I tell myself "OMG what I have done!???"
- I try most option in a boot option (not sure what it called, it's a menu brings up when you press F8). I tried boot into safe mode, safe mode with cmd (both stuck at loading disk.sys), repair system, enable low res (640x480), last known good config, Directory service restore mode and debugging mode. None of them are able to boot.
- I grab a Windows 7 Ultimate repair disc that I have created long time ago. And.... "Oh no! It even cannot boot into a repair disc!"
- I give a Hiren's BootCD 15.2 a try. I boot Mini XP from that disc and..... It can't even boot XP from the CD.
- Ok Ok, maybe it mess something with BIOS setting, I press DEL into a BIOS setting (I believed) and hit restore all setting to default. Unfortunately, my system still won't boot.
Any idea of how I can uninstall this CoreCenter or any clues that what it have done to my system?
The only thing I know for now is just re-installing Windows, but I need to backup some data in C:/ first. I think I can install windows without formatting and backup some data and re-install it with format.
My system information
MSI GE620 laptop (All of hardware is stock, I didn't change anything. Just install extra 4 GB of RAM)
CPU: Core i7 2630QM
GPU: nVidia GeForce GT 540M / 1 GB DDR3
RAM: 8 GB
OS: Windows 7 Ultimate x64
Update: I can't even boot from a Windows 7 installation disc!! *cry*Having not yet installed Developer 6 on my own system, (still running most recent 200 version), I can't be exactly sure. However your problem sounds a lot like the problem I encountered in trying to get my Dev 2000 install to connect.
Here are some things to check:
Is your listener running?
Is your listener properly configured to look for your host machine?
Look in the Oracle Net 8 Assitant utility and see how many listeners have been established. This is where my problem existed. I had 2 listeners. One was trying to connect to my loop back address (127.0.0.1) and could not. The other was properly configured for my host address but would not run because of the failure of the other. Once I removed the listener the was using the loop back address things began to work.
Make sure you have the appropriate alias set up through SQL Net Easy Config and/or Net8 Config.
Thats all I can think of for now.
Hope something I said will help. -
2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers
Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive. -
Startup error message while starting up Windows after installing NI Circuit Design Suite 10
Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 12-01-2008
Time: 13:17:54
User: N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6e 69 64 ure nid
0018: 6d 73 72 76 2e 65 78 65 msrv.exe
0020: 20 34 2e 37 2e 31 2e 38 4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e in unkn
0030: 6f 77 6e 20 30 2e 30 2e own 0.0.
0038: 30 2e 30 20 61 74 20 6f 0.0 at o
0040: 66 66 73 65 74 20 30 30 ffset 00
0048: 37 66 63 36 36 66 7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date: 12-01-2008
Time: 13:18:51
User: N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6e 69 64 ure nid
0018: 6d 73 72 76 2e 65 78 65 msrv.exe
0020: 20 34 2e 37 2e 31 2e 38 4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e in unkn
0030: 6f 77 6e 20 30 2e 30 2e own 0.0.
0038: 30 2e 30 20 61 74 20 6f 0.0 at o
0040: 66 66 73 65 74 20 30 30 ffset 00
0048: 37 66 63 36 36 66 7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date: 12-01-2008
Time: 13:21:33
User: N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20 Bucket:
0008: 36 31 39 39 39 37 36 37 61999767
0010: 32 0d 0a 2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date: 12-01-2008
Time: 13:18:12
User: N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM
Maybe you are looking for
-
Video card for HD and green screen
I use a windows XP64 based machine with a quad core I7 920 processor and 12 gigs of RAM with nVidia 260 card. I use CS3. Right now I am having severe crash issues in Premeire CS3. I do HD 1080i video editing with up to 4 layers of green screen. I cur
-
Need help importing Hi8 footage into FCE4
Hi all, I have a Sony Digital 8 TRV310 camcorder. I'd like to be able to import the Sony footage directly into FCE 4 but am having trouble. I've successfully imported Hi8 footage from the TRV310 into FCE 4 in the past (it's been a couple years) but f
-
Hi there, I can not figure out why I keep getting the following message when trying to update a form. Can anyone suggest what it may be? Microsoft JET Database Engine error '80040e14' Syntax error in UPDATE statement. /html/userinfo.asp, line 133 [Co
-
Changing from Lion 10.7.4 to Mountain Lion
Can I change without any problems from Lion to Mountain Lion? I am afraid becaue I run Windows office for mac, time machine, lots of Apps, Paralles Desktop with Windows 7 to use Autocad and Datev (German book keeping software) etc. Thank you for expi
-
I had PS Cs6 and signed up for PScc but now i have Cs6 extended, how can i fix this?
My computer is running windows 7 when the download stopped i have only got Cs6 extended,