I installed framemaker 12 and now can't run acrobat

i downloaded trial version of framemaker 12 and now can't access my acrobat 8

Hello chrisd52733482,
Could you please let me know what version of OS are you using.
Also, tell me what exact error do you face when you try running Acrobat.
Please ensure that you are logged in as administrator and anti-virus is disabled on your machine.
Hope to hear from you.
Regards,
Anubha

Similar Messages

Installed 10.1 and now can't access itunes store

Just installed 10.1 and now getting a message that "Itunes can not connect to the Itunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again". I am connected to the internet. Made no changed to network settings. Reinstalled Itunes 10.1. No dice. No pop up blockers on. No software firewall. Next steps?

Interesting side note. I had posted to this forum earlier on the issue above - essentially a "me too, i'm also having problems with iTunes upgrade" - a post like many others I see in the forum. But I also copied in a letter I had sent to iTunes support when they failed to offer any solutions to my problem, and urged users to send something similar to iTunes if they were having problems as well - essentially to get Apple to own up and take responsibility. All I want is Apple to say, yes we recognize there is a problem and we're working to fix it.
iTunes support told me they were not aware of any problems with 7.6. As I read through the 100's of other posts on this site about problems I saw many people who got a similar message from Apple.
Apple promptly deleted my earlier post, and sent me an email saying that I was discussing Apple Policy, and that's not allowed apparently.
I'm wondering then - is it Apple Policy to deny technical problems that are obviously impacting many users? And when that's highlighted there response is to censor them?
I wonder if this post will get censored. I'm probably on their watch list.
Appreciate anyone helping with my problem, or echoing if you've had the same.
Rob

Installed Yosemite OS and now can't import email

Upgraded OS system to Yosemite O/S and now my yahoo email migration fails after numerous attempts for it to self repair itself? Any ideas on how to fix?

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages

Installed RT2500-Replug and now my Mac runs better than ever?!?!

I've been using a Netopia USB wireless Card to side-step my airport issues for about 2 months now. There is a glitch that causes the USB card not to be detected on start-up so someone recommended I download this http://mitglied.lycos.de/thomsmac/RT2500Replug.html but before I did the problem rectified itself for some reason and the card started being detected.
Today I unplugged the Wireless card and started up airport to see in the airport update fixed anything for me. It didn't so I plugged the USB wireless card back in but unfortunately the detection problem returned. I download and installed RT2500-Replug and was shocked. I have no idea why but my Mac is now running better that it ever has in the 3 months I've had it. Webpages are loading instantly, Google earth is silky smooth. Not only that but applications are launching faster! I've checked my states and for some reason my Macs RAM usage has been cut by one quarter.
Anyone have any idea what might have caused this? The difference is so noticeable its almost worrying. Might I have had some kind of conflict that the downloading RT2500-Replug might have solved?

You're going to have to give us a LOT more details than that!
Specifically which OS did you install? You say "latest version of Leopard", but that was 10.5. 10.6 is "Snow Leopard". Go to the Apple menu, click About This Mac. That tells you the exact OS version. Give us the processor speed that's there, too, and let us know the approximate (or exact, if you have it) age of your Mac.
How much RAM (memory) do you have installed? Again, it's under About This Mac.
How much hard drive space do you have available? Click on the "Macintosh HD" on your desktop, click cmd-i and look for "Capacity" and "Available".
Matt

Loaded lion and now can not run microsoft office. Any help

need help figuring out why my office programs will not work with lion

Go to Microsoft's web site and you can download it.
http://office.microsoft.com/en-us/buy/

Cant run Acrobat Pro, try to download latest AIR, but installation fails and I can't run Acrobat

I tried to run Acrobat Pro (don't know version as can't open it) and I am told to download latest Adobe AIR, but after downloading the installation fails with Error# 16820, so now I can't run my Acrobat. Anyone know how to break this very annoying loop please?
Brian

Moving this discussion to the Acrobat Installation & Update Issues forum.
TPMBrian are you entering the Acrobat 7 serial number registered under your account at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

I have installed snow leopard and now can't watch BBC or ITV iplayers. Any help?

Can anyone tell me how I can watch BBC/ITV iplayers now that I have installed Snow Leopard?
Thanks
Lucia

Depending how you did the installation, you may still have Flash, but it will need updating to the latest version (not least for security reasons).
http://get.adobe.com/flashplayer/

Just installed FCP 6 and now can't open FCP 5 projects! HELP

Yesterday I was trying to get some help with an FCP project that would no longer open. After a number of (very good) ideas from this and other forums did not help, I gave up and purchased the newest version of FCP Studio 2, figured I would soon anyway.
Well, now I'm really in trouble. FCP 6 will not open my FCP 5 project. It says it will, but it just runs the striped line forever and the FCP says it is 'not responding'. I've seen this problem unresolved here on this forum from last July and I'm very very concerned and actually starting to panic. There must be a way to open my projects? If not, I'm so scr*d. Excuse my French.
Has anyone found a fix? I've deleted all of the renders from the project. Running on Leopard with plenty of space on drives.

I have 15 gigs space available on the hard drive. I'm afraid I'm not sure which ram you are referring to, but its an older G5 that is fully rammed out and the project I'm trying to open is 82 mb. The applestore person I spoke to assured me that my computer had what was necessary to run FCP 6, but my projects are going to get huge. There's no avoiding that, I'm afraid. They are CG and graphics and effects heavy. So I really do need to know how to cope with technical problems while working in large projects.
I deleted the older FCP and Soundtrack software before installation, but I don't think that's a 'clean install' as I'm sure there are remnant folders lying all over the place. If there is a 'clean install' button on the installation disc I received, I somehow overlooked it. I'd be happy for any instruction on this.
I would love to send the project to you, if you are willing to give it a go! How nice of you to offer! How would I do that?

I installed Trusteers rapport and now can't open internet pages I have been visiting for ages. I tried uninstalling bu i keep reading Apple event timed out! Help!

How do I install Trusteers rapport?
I keep reading
apple event timed out!
Pleas help?!

Rapport has never previously worked on a Mac. How to uninstall Rapport, by Trusteer:
http://www.trusteer.com/uninstalling-rapport-mac-os
However, Trusteer recently posted this in another thread:
We would like to recommend you to download Rapport's updated version, as we suspect the problems you were experiencing have already been resolved.
You can download the latest version here:
http://download.trusteer.com/Gcur4Wtnu/leopard/Rapport.dmg
Please restart your browser after the installation completes and let us know if the problem persists.
If the problem persists, we would be very interested in fixing it.
Please note that we offer 24/7 free technical assistance.
Should you need additional assistance, feel free to contact us by submitting the following form: http://www.trusteer.com/support/submit-ticket
We also have helpful information available in our FAQ: http://www.trusteer.com/support/faq

Installed Mountain Lion and now can't open safari.

When trying to open Safari I get an 'internal error. An uncaught exception was raised. Choose "continue" to continue running in an inconsistent state or "crash"...'
Can't uninstall Mountain Lion or reinstall Lion. Or update Safari.
Please help.

i have this same problem too. i upgraded my macbook pro from OS X Lion 10.7 to OS X Mountain Lion 10.8 just now. Everything seems to be working well except for Safari.
Here's the screenshots. i tried selecting both crash and continue but it still won't work. Help

Installed iCloud Drive and now can't see files on iCloud. Should I fallback from iCloud Drive to iCloud, or upgrade all my devices to Yosemite & iCloud Drive?

After installing Yosemite & "iCloud Drive" on MacBook Air, I cannot see files previously stored on iCloud.
But I can get to files on iCloud using my Macs still with old operating system (OS X 10.8.5).
I copied all files from both iCloud and iCloud Drive to thumb drives until decide what to do.

You cannot revert back to iCloud after enabling iCloud Drive on your MacBook Air. If you want to be able to access your documents on all your Macs you'll have to upgrade the others to Yosemite and enable iCloud Drive on them too.

Just installed software updates and now can't log onto Safari because of some TelevisionFanaticsToolbar plugin. Help?

I just installed software updates to my computer and after restarting cannot access Safara. The message says because of a TelevisionFantaticsToolbar plugins. Cannot find on my computer. How do I delete this and regain access to Safari?

Save and/or quit your applications & documents Go to Applications>Utilities Folder Click Disk Utility Click the Volumne (HD) that you want to check. Click the Repair Disk Permissions button. (Don't worry about verifying) At the bottom of window when the repairs have finished, you will see the “most important thing”: Permission Repairs Complete The privileges have been repaired or completed on the selected volumne.
Restart your computer to confirm repairs.
http://docs.info.apple.com/article.html?artnum=106214 http://docs.info.apple.com/article.html?artnum=25751
http://docs.info.apple.com/article.html?artnum=25751

I cant install itunes updates, and now it wont run, cant install or uninstall software error 2324

I can not install or updates itunes sofeware, have had it loaded for years now I get error 2324, i cant install or uninstall the softward

Hey joegallow17,
Thanks for using Apple Support Communities.
Looks like you are having trouble installing iTunes. If you're having issues installing iTunes, try this article.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

Did Itunes update and now can't open it. It tells me msvcr80.dll is not installed,

Did update and now can't open itunes due error of msvc80.dll

Hello Nailjack,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with this article if you continue to experience issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I've just installed Maverick and now can't open iPhoto. I have 9.2.1 currently installed. Am terrified I'm going to lose photos as they weren't all backed up. What do I do? Please help...

I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.

Pogs78,
first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.

I installed framemaker 12 and now can't run acrobat

Similar Messages

Maybe you are looking for