I installed itunes on a HP mini, then after the install finished, no itunes found anywhere. Where it go?
I INSTALLED ITUNES ON MY KIDS HP MINI. IT LOOKED LIKE ALL WENT WELL. EVEN GOT CLICK FINISH TO FINISH. WHEN I CLICKED FINISHED, IT WAS LIKE ITUNES NEVER WAS ON THE COMPUTER ANYWHERE. WHERE DID IT GO?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Go to Settings>iTunes and App stores and sing out and sing back in
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Similar Messages
-
Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
I synced my phone to my compuer, then i backed it up. Originally i had 60 songs, then after the backup only 10 of them downloaded again. How do i get the rest of my music back? Do i have to buy it all again?
If they were purchased from the iTunes store, redownload them for free: http://support.apple.com/kb/ht2519 (supported in most countries: http://support.apple.com/kb/HT5085).
-
how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen
You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red. -
When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?
The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?
i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times. -
please help!...
Follow razmee post to restore from backup.
If you want to let your kids play with your iPhone, I suggest you use Guided Access.
Read here: iOS: About Guided Access -
If I restore my ipod, will it prompt me to backup my existing data? When I begin the restore process, it tells me that all data will be erased. I'm trying to download my library to a different ipod.
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup. -
My iPhone is a 3GS and is iOS 5.0.1 never JBed. After I charged at school it just crashed and unable to be turned on. I can't turn it on unless it's plug onto any power source. Even I turned it on it stays at a screen says "iPhone" and after I swiped the screen it tells me to plug onto iTunes. But after I plugged it on iTunes it just kept rebooting and not syncing or whatever. My computer and iTunes can't detect it also.
If your iPhone suddenly freezes or is just not working right, you can do a hard reset by following these simple instructions:
Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
Hold both buttons until the iPhone shuts off and begins to restart. -
I have a mac-book pro mid 2010, the original mac o.s is version 10.6.3 snow leopard
the hard disk crashed, so i decided to buy another disk, 160gig Sata
i downloaded mac o.s version 10.7.4, and decided to fresh install from a dvd, but durint installation, on disk options, it can't be partition, the command button for partitioning is locked, even in the erase menu bar at mac installation window, and I can't reinstall from version 10.7.4
I've read that when the mac is a mac-book pro on mid 2010, it should used the default mac o.s version.
I'd like to hear some experts here about mac installations,
the hard disk is found, at disk1(only in disk utility option), but it can't be partition or erase, so I can't reinstall a fresh copy of mac.
I'm stuck here:
Part Two: Installing the operating system
1. When the Mac OS X L.I.O.N Installer screen appears, click Continue.
2. When the license agreement appears, click Agree.
then can't continue because no disk was found, I have already formatted it with HFS(not HFS+) in the other Unit(using windows macdrive)
but, you think because of the hfs only and NOT hfs+?
I'm stuck here:
Part Two: Installing the operating system
1. When the Mac OS X L.I.O.N Installer screen appears, click Continue.
2. When the license agreement appears, click Agree.
then can't continue because no disk was found, I have already formatted it with HFS(not HFS+) in the other Unit(using windows macdrive)
but, you think because of the hfs only and NOT hfs+?
thanksI think there's nothing to do with the drive manufacturer,
I used the macDrive for windows, and format it to HFS(not HFS+)
Ok,
Actually I have this folder/files,
InstallMacOSX.pkg (folder)
Inside InstallMacOSX.pkg(folder) it has files:
InstallESD.dmg(using ULTRAISO was burned to dvd)
This files are NOT included in the burn dvd image:
Bom
PackageInfo
Payload
Scripts
This files/folder is outside InstallMacOSX.pkg(folder):
Distribution(file)
[TOC].xml(file)
Resources(folder)
The original .DMG file was MOsXLeoneDieciSetteDue.dmg(but this is fake, it's a Xar compressed)
The valid .DMG file is inside the .XAR, so I extracted it, and found those files and folders.
So, I'll include that in the burned dvd?
thanks -
I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?
Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling -
PPlease help my iPad is not charging properly? Is it bcz I have downloaded iOS 7?
Try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that helps.
Also check your cables. Post iOS7 update some have reported having issues if they use after market cables. So if you're using a non-apple cable, experiment with something else. -
he download was completed the laptop was extracting the software and at the end of the loading line it writes an unknown error occurred (3194) please help me thank you
3194 = https://discussions.apple.com/message/18851577#18851577
-
Please help me!!!!! I cant figure it out!!!
The only thing I can think of is that you have selected the repeat song option as well. Repeat is on the left and is the 2 arrows making a closed oval. The Shuffle icon on on the right and has the 2 arrows crossing like an X. They "light up" blue when selected. The Repeat icon has 3 modes: off, repeat song and repeat album.
Hope this helps!
Maybe you are looking for
-
Hi, Can I get good documentation links regarding Oracle Sessions. I searched in Internet and found some, but cant able to understand them quite well. Thanks Edited by: user10679113 on Jan 5, 2009 2:37 PM
-
Can't Attach Files, Please Help
I tried to attach some screen shots, I hit browse, click my doc, hit open, shows up C:\Users\Derek\Documents\Multisim 12 Screen Shots\Screen Shots.docx in the Attachments box. hit post. It disappears from the Att. box. If I hit post again it will jus
-
Drag and drop interaction for a different use
Hi, Can anyone please help me get the a solution to the below: For the drag and drop interaction my user should be able to drop the answer (irrespective of that being a wrong answer) to any of the options, but as they click Submit, the actual answer
-
IView that displays different things depending on event
Hi list, I need to create an iView that will be receiving different events from other iViews. This receiving iView will display different things depending on the event (eg. image maps, data sheet, etc). How should I implement this iView? Should th
-
I turn it off the Edit-Prefences to "Never", but everytime I get out of Acrobat and go back in it's back to "Only for PDF/A documents". How can I set "Never" to default??? Changed iPDFApolicy to 0, but keeps changing back. Thanks, Rod