I installed itunes11 on windows 7, i cant open itunes

Help emergency
I installed itunes 11 on pc windows 7 , and then i cant use i tunes, i cant open itunes,
i followed the process and uninstall all, and re install again  and no solution
pat

In regards to iTunes content, an iPhone can be synced or manually managed with music and video with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first.
You need to decide which computer you want to transfer iTunes content and photos from. If this will now be your computer at work, you will need to transfer your iTunes library and your photos from your Mac to your PC. You can transfer your iTunes library from your Mac to your PC at work following the instructions included with this link. This will make the iTunes library on your PC at work identical to your iTunes library on your Mac at the time it is transferred from your Mac. You will also need to authorize your PC at work with your iTunes account with iTunes - the same iTunes account used on your Mac.
http://support.apple.com/kb/HT1751

Similar Messages

  • Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • I cant open itunes please help

    i cant open itunes i get this message "itunes was not installed correctly. please reinstall itunes" and i get this error 7, and i have try to reinstall itunes over and over but every-time i try opening itunes i get the same pop-up and i dont know what else to do

    Starting to steadily work through the possibilities with that.
    Have you checked on your .NET framework as per the following document?
    iTunes for Windows: "Error 7" message when opening iTunes

  • I downloaded the new update, and now cant open itunes

    I recently downloaded the new itunes update, now cant open itunes, redownloaded atleast ten times, still cant open it all i get is an error message, reinstalled the itunes i had before the update, that wont open either, so i deleted itunes and went to redownload it, still cant open up itunes or download it

    Hello there, thumerick.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I cant open ITunes because of QuickTime

    Hi, I am really hoping someone can help me! I cant open ITunes, every time I try a message pops up stating 'Itunes requires QuickTime 7.5.5 or later' but i have now downloaded QuickTime and installed 3 times and it still isnt working! Please help community! This is my first mac and im itching to get stuck in!

    I am having the exactly same problem with my recent installation of update for Itunes 5.0 and Quicktime 7.
    when trying to download Quicktime 7 separately I get Error 1402 followed by Error 1603.

  • Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • Cant open Itunes on PC

    cant open itunes on PC

    Hello, Hasya.
    Thank you for visiting Apple Support Communities.
    If you experiencing issues with a blank iTunes Store, I would recommend the steps in the article below. 
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    Cheers,
    Jason H. 

  • Cant open itunes says dont have apple application support

    cant open  itunes help

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Error 0x80090318 and lots of other errorsI live in Iran  Yesterday i wanted to use itunes store for windows ; when i have open itunes it gives me the error 0x80090318 .  I have search the wb alot and i have check lots of Iranian and English website but ha

    I live in Iran
    Yesterday I wanted to use iTunes store for windows ; when i have open iTunes it gives me the error 0x80090318 .
    I have search the web alot and i have check lots of Iranian and English website but have not find any solution for
    this problem . Today I have find a software called "Hide my IP" i have opened up that
    when this software was opened , itunes have said "iTunes can't verify the identify of the server "init.itunes.apple.com"".
    then i have click on "continue" then iTunes said "iTunes could not connect to the iTunes Store. An unknown error occurred (310)."
    And theres a matter that i think that have a connection with this topic and thats , that when i want to go to the lots
    of websites like Google Yahoo! Mail and lots of other website my both browser ( FireFox and IE ) will say" This connection is untrusted " .
    I think the solution of my second problem is the solution of my first problem too !

    Tried all the rest on this site did not work for me
    Follow the link below & this one sorted it for me, it was a conflict in programs using Winsock & I got rid of my old program,
    Sorted.
    http://support.apple.com/kb/TS4123
    Tom Ireland

  • Cant open itunes after upgrading to yosemite

    Cant open itunes on my macbook pro after upgrading to yosemite. Someone please help if they have faced similar issues.
    Thanks.

    Try Terence's instructions here  Is Iphoto gone ? i want it back!
    Pete

  • I cant open itunes on computer

    I cant open itunes on computer

    I'm having the same problem.  Already followed the steps and removed the SC info.sibd file then repaired the Quicktime program.  Nothing has worked.  Should I remove the Itunes program?  I recently updated Iphone and synced iphone and ipod now cant open itunes at all.  No error message.  The icon thinks a moment then does not open.

  • After restoring Windows I tries to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.' how do I do this?

    After restoring Windows I tried to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.
    What do I do? I don't want to lose my entire liberary!

    Hi there computerfailure,
    You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    -Griff W.

  • I cant open itunes cause quick time failed to initialize (error - 2096)

    i cant open itunes cause quick time failed to initialize (error - 2096)

    hmmmm.
    doublechecking something before proceeding ... are any boxes ticked in the Compatibility tab for your QuickTime?
    (i've seen that message produced when some of the Display Settings boxes in there are ticked, not just the compatibility mode one.)

Maybe you are looking for

  • How can I create a new table in a MySQL database in MVC 5

    I have an MVC 5 app, which uses MySQL hosted in Azure as a data source. The point is that inside the database, I want to create a new table called "request". I have already activated migrations for my database in code. I also have the following code

  • Post a good issue against an outbound delivery with movement type 601 K

    Hello, according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level. Since th

  • Capturing In FCE

    Am trying to capture some DV footage into FCE, and when 2 GB of film is imported, I get a warning saying that capture has ben stopped due to lack of memory space. I have 500GB free!! This means that only 9 mins of film can be captured at a time and i

  • Execute query in ADF BC

    I'm using JDev 10.1.2, Struts, ADF BC. I have an 'input form from' a view that displays all the records. I click on Find and Execute to search for particular record it works fine too. But, if there are no records for the 'find', it doesn't display an

  • Coldfusion 9 doesn't see java servlets annotated by WebServlet annotation.

    Hi. I'm trying to run java servlet application on coldfusion 9 running on top of iis 7 server. Also i'm using java 1.7. Coldfusion seems doesn't see servlets annotated by WebServlet annotation. I get 404 server response. If i add servlets mapping in