I installed java from the apple site and restarted firefox but it still thinks that I don't have java. How to I enable java? I am using lion on a mac.

I got a message saying I didn't have java installed. I went to the apple site and downloaded JavaForMacOSX10.7.dmg and installed java. but it still says I don't have java installed.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Similar Messages

  • I install the add-on and restart Firefox, but it still doesn't install.

    Whenever I install an add-on or download, it installs, right? But when I restart Firefox (like it asks me to), and it restarts... the add-on doesn't install. It just asks me to restart Firefox again.
    == This happened ==
    Every time Firefox opened
    == I installed my first add-on.

    I strongly suggest you file a bug about this matter or if you don't know how I could do it for you. I see you are using a beta version of Firefox I recommend you use 3.6.6 the current production version. Simply uninstall Firefox 3.6.7 and download Firefox 3.6.6 by following these instructions: [[Installing Firefox on Mac]].

  • I cannot install itunes from the apple site .. it keeps saying the software is corrupted and cannot install correctly.. help!!!

    I have tried to install the software from several sites including the apple site and they all say that the software is corrupted and did not install correctly to delete and reinstall. this seems unlikely as it has been weeks since I have been retrying the sites with the same results...is there an apple download that will check my pc for any errors that may be keeping the itunes from installing.. or is there anything else i can do to fix the issue.. its unlikely that itunes could stay corrupted for so ling without noticing it and fixing the issue..thank you...

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • TS3212 I just installed iTunes (from the apple site) on to my new laptop.  When I click on the icon to open I get a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  Now what do I do and ho

    I just installed iTunes on my new laptop.  When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  I have no idea what this means or what to do about it.  I can't even find a file on my computer like the one referred to in the pop up.  I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes.  What should I do to fix this?

    What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
    Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.

  • Widgets loaded from the apple site don't install ...

    i'm trying to install widgets to my MBP running OSX 10.8.4 that i have loaded from the apple site, and it refuses to install them saying my security settings prohibit installations of software not approved by apple.  how to change that setting?  i can't find an option in the preferences to allow the widgets to run.  i'm assuming the .zip files are ok if they came from apple..... what am i missing?

    See KB Article:  http://support.apple.com/kb/HT5290 OS X: About Gatekeeper 

  • How to install and use a plug-in downloaded from the apple site?

    how to install and use a plug-in downloaded from the apple site?

    Emelie,
    which plug-in do you want to install?
    some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
    For others you move the plug-in into to System Library or your User Library:
      Your Hard disk  > Library > Application Support >Aperture > Plug-Ins > Edit
    or
    Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
    If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
    You can tell by the extension, what kind of plug-in it is.
    E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
    Regards
    Léonie
    P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
        Finder >  Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
    To show the System Library:
         Finder >  Go > Go to Folder
    then enter   / Library

  • Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free?  Many thanks

    Hi we have apple credentials for downloading OS and creating Provisioning profiles. Now we are trying to upgrade the Mac OS 10.7.3 version. do we need should buy this version from appStore. or can it be download from the apple site for free?  Many thanks in advance!

    Whether you need to buy Mac OS X 10.7.3 depends on what version of OS X you have now.
    If you have OS X 10.6.x or lower it is a paid upgrade from the Mac AppStore.
    If you have OS X 10.7.x it is a free upgrade you get using Software Update on your Mac.

  • Will an Unlocked iPhone 4s purchased online in the UK (directly from the apple site) work between different networks/sims, as my time is spent in both the UK and Canada?

    From what I've gathered looking around the forums, the answer seems to be yes.
    However through searching more and more, I've seen some people have said otherwise or had some difficulties using their phone internationally with a different sim, so I just want to make sure that I can use it internationally with all the full features.

    Thanks. I guess also my main concern is that I've heard about problems people have encountered when buying their iPhone from Carphone Warehouse here in the UK (unlocked) that once they've inserted their sim it automatically became locked to that one service provider.
    I however will be buying directly from the Apple store, so I just wanted to make sure that I wasn't going to get trapped by my iPhone locking to the first carrier I insert into my phone.
    Other than that I understand that certain carriers might require agreements/contracts to get connected.

  • How to Download Leopard from the Apple site

    Well my MBP dumped its hard drive this weekend. I have installed a new HD but I can't find my Leopard installation disk any where.
    Is there a way I can download the entire OS from the Apple site?

    No. Your Mac if it came with Leopard shipped with operating system discs for Leopard restoring. If you lost your discs, call AppleCare for replacement discs. If you bought your Mac from a non-Apple authorized source, contact them for the discs, and ask them to contact AppleCare for the discs if they lost them. The discs that shipped with the Mac should not be separated from the Mac, and should always be kept in a safe place.

  • Installed Illus CS6 from the adobe site on my laptop but Illus install will not accept my Serial

    Installed Illus CS6 from the adobe site on my laptop but Illus install will not accept my Serial # and not design and web premium CS6 is list in the serial# match drop down box

    Go here and scroll down to Still need help? Sign in for support:
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    work your way through the links there and  just keep going, even when it looks like a page you've already been on, and you will be able to start a chat session and get it straightened out.

  • I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

    hey please help!
    i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts It goes back to waiting

    I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts. It goes back to waiting

    https://discussions.apple.com/message/19584729#19584729

  • Hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
    If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again.  You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589.  This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process.

  • I am locked out of my computer (macbook air) I just got it back from the apple store and they reset it. I put in a new password, and now it doesnt let me log in anymore. Command R doesnt work, all i hear is a sound, but nothing happens.

    I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
    I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
    Command R doesnt work, all i hear is a sound, but nothing happens.

    What I don't understand is why it is rejecting a password I am creating.
    Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
    FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements.

  • How can I remove the credits from the apple ID and import it to another apple ID?

    How can I remove the credits from the apple ID and import it to another apple ID?
    I want to remove the credit I have from my apple ID to another apple ID.
    Is there a way?

    No, sorry. You cannot transfer an iTunes credit to another Apple ID.
    Cheers,
    GB

Maybe you are looking for

  • Error on portalapp.xml

    hi all, I have this portalapp.xml which have lot of components in it, but i am not sure that which components is needed to run my portal application called Profile.jsp/Profile.java and ProfileBeans.java. And there's a <registry> tag which i dun reall

  • IMAC LCD Display

    One of my IMACS (24 in. 2.4GHZ Intel Core 2 Duo) experienced an LCD that was dark in the upper 1/3 of the screen. The OS (Snow Leopard) seemed to operate normally. Since I had a warranty from Best Buy, I took the IMAC to them for repairs. After one m

  • HT4235 im in recovery mode i want to save all my data from this device(ipod touch) how can i do so?

    HeLp... im in recovery mode and I want to download all of my content from my device to my home computer....How do i do this???

  • Removing Non-Breaking Spaces En Masse

    A bunch of text I copied into a pages document is littered with lots and lots of non-breaking spaces (^ with a dot underneath it, showing up as an invisible). Does anyone know of a way to select the affected text and convert the non-breaking spaces i

  • Opening Remote Browser Session w/RT Client causes unopened VI from Project on Host computer to pop up and run

    I have a functional global variable (FGV) that runs on my RT target (LV 9.0f2) and is set via SubVI Node Setup to "open front panel when loaded" and Execution under VI Properties for the FGV is set to "Run when opened", "Allow debugging", & "normal p