I installed logic express 9 on my mac but it says it cant be used on my mac OS X 10.9.1 anyone know why this is?
Is there anyone knowing why this is?
Because it is probably so old, that it doesn't run on 10.9. You have to update Logic Express to 9.1.8 and it will work. Just run "Software Update".
Similar Messages
-
OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.
Hi johnb49273320,
What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
Best,
Sara -
i have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?
sorry all - disregard I've identified the issue in the language settings with one set to 'English - United States' and one to 'English - United Kingdom' - now fixed.
Cheers -
I have a canon printer with a mac computer. For some reason whenever I print something the ink on the page is all green not black like it should be. I put in a new black ink cartrridge but that didn't change anything.Does anyone know why this is happening?
You posted in the OS 9 & below forum. What OS X version are you using? What model Canon printer? Canon printers have a test print capability (open the Printer Utility). What happens when you do a test print? Are all the printer cartridges in their proper location? Sometimes when you print "black", the printer uses a mixture of the colors to get "black". In the Printer Utility, check the levels of the other cartridges. There may be one color that is clogged.
Cheers, Tom -
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
Installed Logic Express 8, now my Mac Pro won't start
I got a brand new Mac Pro about a week ago. It appeared to work fine until last night. I powered it on, installed a brand new copy of Logic Express 8 on it, shut it down, and now the Mac Pro can't finish starting up (stays forever on the gray screen with the apple and the progress indicator).
Has anyone experienced a similar problem caused by Logic, or is it just a coincidence?
(The complicating factor is that the very first thing I did when I got the Mac Pro was to install M-Audio's driver for the ProjectMix I/O. This is the only driver I've added. It's not officially supported on Leopard. But it didn't affect the Mac's ability to boot for the first week, so that would seem to put it in the clear.)I got a brand new Mac Pro about a week ago. It appeared to work fine until last night. I powered it on, installed a brand new copy of Logic Express 8 on it, shut it down, and now the Mac Pro can't finish starting up (stays forever on the gray screen with the apple and the progress indicator).
Has anyone experienced a similar problem caused by Logic, or is it just a coincidence?
(The complicating factor is that the very first thing I did when I got the Mac Pro was to install M-Audio's driver for the ProjectMix I/O. This is the only driver I've added. It's not officially supported on Leopard. But it didn't affect the Mac's ability to boot for the first week, so that would seem to put it in the clear.) -
I'm not receiving emails from 2 places. I don't have rules set up and both senders have the correct address. The messages aren't in my junk folder either. This is for my.mac account. Anyone know how to fix?
That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
Check Mail -> Preferences -> Viewing -> Show header detail
I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer. -
I have a Intel-iMac running snow leopard and programs that I run and then quit wont release the memory the were using I have 3GB of Ram so I should have plenty available. Has anyone else had this problem? Im tired of restarting to get my memory back.
Russ Grebenc wrote:
I realize that 3 GB is not much today but 95% of what I use is Safari, Firefox, and Mail and I never used to have this problem. Im using Snow Leopard 10.6.8. Its a 2.4 Ghz Intel Core 2 Duo iMac.
Browsers tend to use a lot of RAM, particularly if you have multiple tabs open. If you want to see where your RAM is being used open Activity Monitor (Applications - Utilities - Activity Monitor) and you can see. If your machine has the ability to upgrade the RAM that is what I'd strongly recommend you do. -
Hi i have avi files saved in iphoto that i used to be able to play through quicktime. However in the last few weeks i cannot play many of these files. I can see the videos and click on them but nothing happens (i have version 7.6.9 of quicktime). Does anyone know why this has happened and what i can do about this?
Thanks.What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted. -
How do I install Logic Express without CD
Just got a new mac and it has no CD drive. So how do I go about installing Logic Express that I own? I only see updates listed in the downloads sections of apple pages.
Thank you, this is a good suggestion. But for some reason I coulnd't get it to work. I followed the steps as described but the drive never showed up under "devices" on the computer without the drive.
Anyway, I created a disc image of the installation disc and all ended well.
Thx. -
I just purchased an intel mac and have installed Logic Express 7 on it. I cannot get it to record audio (states "audio disabled") and it won't respond to midi commands. Everything basic about the program seems to be up and running besides this. As I've never used this program I'm not sure if I'm doing something wrong in the set up or if the program won't run on my intel mac. Garageband 09 works immediately for me upon opening, as does Soundtrack 3. Am I missing something or do I have to upgrade? Thank you much for your assistance.
It seems that the Mini behaves well in general terms, but as mentioned by Mike Conelly in this post, under certain special circumstances, the computer "seems to choke when there were a bunch of plugs on the same track, performance was much better when I only had 10 short on each track instead of 15. This may improve some of the results already reported if you left 15 running on the first track, feel free to double check your results if you think it will make a difference on your box".
Comparing his benchmarks to others listed in the forum, is really encouraging.
I understand that LE is a lot less resource consuming than LP, so probably I'll end buying one soon. If so, I'll post my results. At this time, my iBook is collapsing when using two or three software instruments with big chords...
Last but not least, I'll always have the freeze feature to save CPU...
Thanks again! -
How to install Logic Express 9 without disc
Hi,
I am awaiting arrival of my Retina MacBook Pro, I have logic express 9.1.0 on disc, I was just wondering how I am able to install logic express (as it is not in Mac App Store) and use my serial??
Regards,
DavidIf you have another computer with an internal drive you can enable "DVD or CD Sharing" to install to your RMP:
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US
You could also use an external drive, e.g. Apple's Superdrive:
http://store.apple.com/us/product/MD564ZM/A?fnode=5f -
Can you install logic express on more than one computer
can you install logic express on more than one computer ?
Be sure to read the End User Licensing Agreement for questions of this nature. You are allowed to install Logic on two computers that you own, for example an iMac and a MacBook Pro. You cannot, however, use the two computers at the same time if they are on the same network. You can use one computer as a Logic Node to shift some of the processing load (which you would likely do with an ethernet cable) but you don't need to have a full installation of Logic on the Node machine, just the Logic Node installation. The idea of allowing two installations is so that you might take advantage of a portable computer in the field for on-site recording then later transfer those files to a desktop studio set up for further editing.
-
Please can someone advise how I reload an old version of Logic Express on a new Mac? Many thanks
Hello KarmicCC,
If you still have access to the old Mac, you might try using Migration Assistant to transfer applications to the new Mac.
How to use Migration Assistant to transfer files from another Mac
http://support.apple.com/kb/HT4889
However, Logic Express 8 and earlier are PowerPC applications which are no longer supported (in 10.7 and 10.8).
Cheers,
Allen -
im installing logic express 8 and my serial number is not working. it asks me for my original xs key number?
i never had logic or any kind of recording software on my macbookpro. do i need logic studio to install express?You do not need Logic Studio to install LE8. Are you sure you have the full LE8 version and not the upgrade? If it's asking for your original key number, that implies an upgrade.
Maybe you are looking for
-
As the title says, I have a new Windows 8.1 based device which I'm trying to connect to my Exchange 2010 box (SP3 Update Rollup 2). I currently have my iphone set up as an EAS client with no problems. I have an EAS policy on my mailbox with the fo
-
Adobe Air 3.5 application in iOS 5.1 can't start
Hi, I cretated a app in App Store with Adobe Air 3.5 It worked fine in a iOS 5.1 iPad when I tested it. But now, if I download it from the Apple Store it crashed on the beginning. I just downloaded it, click on it and crashes during Adobe Air loading
-
T.code for ABAP Varaints
Hi, Can anybody tell me the transaction code for ABAP varaints. In Se38 , Giving a program name and selecting the radiobutton varaints and click on display. We get varaints screen. I need the transaction code for that screen. Regards, Sai
-
How to add Currency field with dropdown on screen layout (module pool)
I need to add a field called <b>Currency( field label )</b> with <b>dropdown (like SKB1-WAERS). </b> The <b>field label</b> and <b>input output field </b> should default as being hidden and sould be visible only when other field value ( on the same s
-
Re: PeopleSoft returns an ORA-1858 error msg when retrieving a VARCHAR(30) Fld
Have received a similar error - created a view utilizing a dblink - six fields - 4 from dblink and 2 from local database. The view and data is accessible thru PL/SQL Developer with no errors. When attempting to access thru a page/component utilizing