I installed Maverick an hour a go.My IMAC was on 10.6.8 before.I need to update because I like to Install Logic PRO X . Now my MBOX2 Pro is not recocnised by the System. AVID does not deliver 10.9 drivers. Wich Audio device is supported?

IMAC runs fine using Maverick 10.9. >>>> But ( I'm a musican )
Since Installation , which I needed to be upgraded for use of LOGIC X , it does not connect my Mbox2 Pro ( AVID ) anymore.
Is there an alternative Sound Audio and MIDI device that will run under Maverick ?
please advise

Hello Gweedo888
Yo did not answered my Question.
I found the AVID Page,- Yes, and I kwow this fu..... helpless statement : " won't work ".
My Question was :
Is there an alternative Soun and MIDI device that will run under Maverick.
I neded to Install 10.9 becouse I want to run / install Logic X.- that reqieres at least 10.8.5

Similar Messages

How do I install Logic Pro 8.0.2 on the latest macbook pro?

I just bought a new macbook pro retina and realised that it does not have a disc slot
to put the installation disc in!
How do I install Logic Pro 8.0.2 on the latest macbook pro?
Also is there a way for me to upgrade it to Logic Pro X?
Please help!

Forget Logic Pro 8 on your new macbook, it will not work. The "upgrade" to LPX will cost you around 200 bucks and can be acquired via the App Store.
Have a nice day!

Re: installing Logic Pro X on a second computer that doesn't have much internet bandwidth

I have two complete studios, two locations, two Mac minis. The first has full internet bandwidth and I've installed Logic Pro X with all the additional content. The second is in a rural location where I have very limited, very slow and very expensive internet. How can I install Logic Pro X without downloading all the additional content? Can the content files be copied to a drive and then to the second computer?

I'd take the second Mac to a place with a better connection. That's probably your best bet.
You could try to copy the files in:
Macintosh HD/Library/Application Support/Logic
Not sure what the result would be. Maybe copy the files first, then install? I think either way LPX has to do this. Another way possibly, install it, then when it requires the content download, close it, copy the files over, then re-open?
Let me know. This is all a guess.

When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so. For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so.
For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the timeout/reminder notification. Any idea ?
-Thanks,
Arun

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

After installing Logic Pro X in my iMac several menus does not appear

After installing Logic Pro X in my iMac intel core i5 Maverixks several menus does not appear

Thanks Eriksimon,
Some menu items were missing. For this reason I took the Control Bar Screenshot only.
Russell Moran went straight to the point.
Thank you for your time!

I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I installed mountain lion and now my kodak printer is not working. Any sugestion please

i installed mountain lion and now my kodak printer is not working. Any ideas? please help

What errors do you see? The /var/log/cups/error_log file might have some more information.

TS2565 I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!!

I have just installed logic pro Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!! What can I do. I tried upgrding the logic pro software but this didn't help. It still won't open.
Many thanks

How did you install Logic onto your new Mac Book?
From the App store or from the DVD boxed set?
If it was downloaded from the App store then it should already be v9.1.8... and if it isn't you need to call Apple to help you sort this out.
If it was originally from the DVD boxed set then you must update using software updates....
If software updates cannot find Logic to update it then you either have...
Renamed the Logic Pro app in which case rename it back to Logic Pro
or
The Logic Pro App is not in the applications folder which is where it needs to be to be updated... so move it back there.

Buy logic pro 9. installer write that the serial number is not valid.

buy logic pro 9. installer write that the serial number is not valid.

You bought the box or Logic Pro in the Mac App Store?
Yes, BOX
Message was edited by: VLyahov

How long does it take for Logic Pro 8 to load on your system?

Hi I just spent a few hours installing Logic on a new laptop and started freaking out because Logic Pro 8 wouldn't load. After I click the application the screen pops up I see it's loading, then the templates appear and I choose one... after that - that's it, nothing's moving I am just staring at the screen, when I nervously opened the Force Quit screen to check status I see it not responding so I closed it from there.
So I tried a few times over and in fact was going to stop the post there but then during last time when I didn't do force quit as I was tying this message Logic Pro opened up with the template ready to go.
So I tried it a few times while always monitoring the status on force quit window. And it seems to be going on the same pattern. Assuming I have a file saved so it doesn't give me templates, ok, after I click Logic Pro I see a freed loading screen with files running then everything disappears for about a minute. During that time if I look in the force quit window it shows Logic Pro as not responding then you can see it goes back and it starts fullscreen and everything is ok.
Meanwhile none of the other apps have that problem, Soundtrack and Waveburner all start up right away.
So I am wondering if anyone else has these slow startup. I don't know, I did download almost all sound DVDs excluding two jam packs, in case it matters, in case that's what takes so long to load.

Nickiz wrote:
There's something wrong with 10.5.2 and Logic 8.0.1....The problem is not to start the program, the problem is to open a project. It takes much longer time then before. It doesn't matter if it's a big project with lot's of audio and instruments or if it's a empty project. I have the same problem on three computers. What is the problem?
Nickiz
Follow komkommer instructions on this link. I suffer the same problem after 5.2. after erasing fonts damaged all is fine and logic opens very fast.. 8 or 10 seconds on macbookpro 2.33
http://discussions.apple.com/thread.jspa?messageID=6700586#6700586

Logic Pro 9 not showing on "Purchases" at Mac App Store anymore

I'm planning buy a new Mac, but I have Logic Pro 9.1.8, and when I open the "Purchases" (from Mac App Store) I can not find it there any more since Logic Pro X was released. How should I proceed? I don't wanna buy the new version right now, maybe later.
Is there a nice way to backup it up and move to the new Mac? Because as I said, it's gone from my purchases since Logic Pro X was released, and I have only one Apple ID account. And even old things like the Mac OS X Lion Server I bought is there. But strangely Apple removed Logic Pro from my account "purchases"... I spend 180 bucks on that.
PS: I know that I can move it using Time Machine. But my computer is a bit messy, so I would like to install Logic Pro 9 again from the Mac App Store if it's still possible. Sometimes a fresh new install is the better way to start a new computer, because my experiences with Time Machine are that sometimes you can also migrate problems from an old to a new computer. So I would prefer some advice about how to move only Logic Pro 9 and nothing else... because the rest I can install from scratch. :-)

Hey Blueberry...
However the "hide" checkbox is right next to the download option, you probably clicked on it by accident at some point.
Interesting because I have no 'hide' checkbox.. I have to right click on the App's bar in the Purchases Tab to show a dropdown with 'Hide Purchase' instead...
Looks like this... in Mavericks... App Store version 1.3..... and 10.8.4/5 ... App Store version v1.2.2
Did they update the App at some point to remove the X?

Logic Pro 8 not seeing MOTU Symphonic Instrument or MOTU Ethno Instrument

I've installed Logic Pro 8.0.2, MOTU Symphonic Instrument 1.1.3, and MOTU Ethno Instrument 1.0.1. Logic 8 does not recognize the MOTU plug-ins. The stand-alone MOTU apps work, MOTU Ethno Instrument.component and MSI.component are both properly installed in Library>Audio>Plug-ins, and both MOTU plug-ins are available in Garageband.
Are there any known issues with MOTU and Logic Pro 8?

invisibleman wrote:
I've installed Logic Pro 8.0.2, MOTU Symphonic Instrument 1.1.3, and MOTU Ethno Instrument 1.0.1. Logic 8 does not recognize the MOTU plug-ins. The stand-alone MOTU apps work, MOTU Ethno Instrument.component and MSI.component are both properly installed in Library>Audio>Plug-ins, and both MOTU plug-ins are available in Garageband.
Are there any known issues with MOTU and Logic Pro 8?
Sounds like a job for the Motu people.
What does Motu tech support have to say about this?

Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have...

I installed Maverick an hour a go.My IMAC was on 10.6.8 before.I need to update because I like to Install Logic PRO X . Now my MBOX2 Pro is not recocnised by the System. AVID does not deliver 10.9 drivers. Wich Audio device is supported?

Similar Messages

Maybe you are looking for