I installed the Lightroom CC update.  I cannot open it. What is the problem?

I installed the Lightroom CC update.  Now I cannot open the program.  Any suggestions?

I'm having the same issue.
I had Lightroom 5 installed via CC, and working fine on a Windows 7 desktop.
I opened CC and saw the Lightroom CC upgrade.
I installed Lightroom CC,..but when I try to open it, it dumps and gives me the following error:
Adobe Photoshop Lightroom has stopped working
If I look at the problem details I see:
Problem signature:
  Problem Event Name:    APPCRASH
  Application Name:    lightroom.exe
  Application Version:    6.0.0.10
  Application Timestamp:    5523190c
  Fault Module Name:    libcef.dll
  Fault Module Version:    3.1750.1805.0
  Fault Module Timestamp:    53eb9d68
  Exception Code:    c000001d
  Exception Offset:    00000000020f5fa3
  OS Version:    6.1.7600.2.0.0.256.1
  Locale ID:    1033
  Additional Information 1:    1849
  Additional Information 2:    1849c65267ce2967d89f315e1c3c4b82
  Additional Information 3:    95b7
  Additional Information 4:    95b7e9ed49fb3657956fc9b27015606a
So what's up with this,...I'm at a dead stand still.
I have tried rebooting the desktop.
Signing out of CC and then signing back in,..to no avail.

Similar Messages

  • I installed Lightroom CC successfully but cannot open the program. What can I do?

    Dear colleagues,
    I installed Lightroom CC successfully but cannot open the program. What can I do?
    Thanks for you help.

    Puttetorpa
    The situation with Premiere Elements 8.0/8.0.1 and version earlier than it (in particular 3.0/3.0.2) is disturbing with regard to MPEG2 Activation.
    Adobe document says that it no longer supports MPEG2 Activation for versions 8.0/8.0.1 and earlier and points the users of this group of products to a version later than 8.0/8.0.1, the current latest version 12.
    But, I am not sure of the real answer. The doubts are cast by the findings of some who have claimed to have solved the problem using a uninstall/ccleaner/reinstall scheme when they have been met by the MPEG2 Activation issue.
    But, I would ask....Do you have the latest version of QuickTime installed on your Windows 7 64 bit computer? And, are you working with version 3.0 as the 3.0.2 Update?
    Is it still possible to run your Premiere Elements 3.0/3.0.2 on the prior computer on which it was installed?
    Also, does your Windows 7 64 bit come with Windows XP Mode
    Install and use Windows XP Mode in Windows 7
    which is essentially a virtual Windows XP Professional SP3 32 bit.
    As last resort, and highly experimental, but would you have time to experiment by replacing your latest version of QuickTime with the QuickTime Alternative 1.8.1 and then determining what happens with your Premiere Elements 3.0/3.0.2  Windows 7 64 bit situation? Do not bother with the MPEG Streamclip program download, just the QuickTime Alternative 1.8.1.
    http://www.squared5.com/
    Please review, consider, and do what you feel comfortable with. We will be watching for your progress.
    Thank you.
    ATR

  • Since Yosemite update, we cannot open Minecraft.  Keep getting message that we need to install the legacy SE 6 runtime. This has been unsuccessful. Any suggestions? A nine year old boy will be grateful! Thanks!

    Since Yosemite update, we cannot open Minecraft. Keep getting message that we need to install the legacy SE 6 runtime. This does not work. Any suggestions? A nine year old boy will be grateful as will his mother! Thanks!

    Is this the one you're installing?
    Java for OS X 2014-001

  • I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

    I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now.  HELP!!!

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • After software update I cannot open outlook express

    after software update I cannot open outlook express

    when I click on mail in the dashboard, just nothing happens, although I can see that have 5 new email messages (number in red dot)

  • I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

    I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

    I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
    MacBook Pro, Mac OS X (10.7.2).

  • Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

    I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

    Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
    Good luck.

  • Trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks

    trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks, what do I need to do please ?

    You're right. It wasn't QuickTime itself. I solved all the problems myself.
    The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
    The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
    Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

  • My iphone was overheated and then it closed itself, now, I cannot open it, what should I do?

    My iphone was overheated and then it closed itself, now, I cannot open it, what should I do?
    My iphone suddenly closed itself but continued heating. Now it cooled down but I cannot open it. I have ejected the sim card and inserted again but it doesn't work anyway. Also, computers do not recognise the phone and nothing shows up on the screen.
    What should I do next?
    Thanks fellas..

    If your iPhone is still under the warranty I would contact Apple support and browse the replace or repair section. Because of the incident the iPhone should be repaired free of charge.

  • I reset my password and now I cannot open Itunes, what do I do?

    I reset my password and now I cannot open Itunes, what do I do?

    The program does not open, I am using Vista.  I just went through repair and it started several days ago after a year of not working.  Now I am back to the same problem

  • All of a sudden I am receiving photos as winmail.dat files, that I cannot open.  What is this, and why can't I open winmail.dat?

    All of a sudden I am receiving photos as winmail.dat files that I cannot open.  What is this and why can't I open them?

    http://www.twistermc.com/583/open-winmaildat-files-mac/

  • MY IPOD TOUCH CANNOT OPEN. WHAT CAN I DO

    MY IPOD TOUCH 3G CANNOT OPEN. WHAT CAN I DO?

    Try here:
    iOS: Not responding or does not turn on

  • TS1702 Vtok application problems since I update my iPad 2 system to ios6, my vtok cannot open. What I need to do in order to fix this problem? I already removed and re installed the application many times, but this didn't fix the problem.

    It is any problem with the application vtok? Since I update my iPad2 system to iOS6.0 I was unable to use this application. The problem is when I tap on the vtok icon, the application opens and closes right away. I removed and reinstall the application twice, but this doesn't fix the problem. When I try to find the application on application store, it's give me a message that the vtok application is not available in USA.

    Not available in Spain either. I can't find anything googling for this problem, Vtok's page and facebook page seem to be unmaintained.
    It is strange such a widely used app doesn't show life signals.
    Good luck

  • I updated the pages software yet I'm still on the previous update and cannot open my files. Help!

    I updated the pages software version 5 yet I'm still on the previous update 4.3 and cannot open my files. Can anyone help?

    Have you checked that you are opening the new version? To check this, open a Finder window, select Applications in the sidebar and open the Pages app with the new icon, so you will get the new version.
    Your problem is caused because Apple decided to keep the old iWork applications version after installing the new one. The only thing you have to do is to open it from the Applications folder, or drag the new version to the Dock, so you can access to it quickly

  • After installing itunes update I cannot open my itunes  music files.  How can I fix this problem?

    I installed the latest Itunes update and after installing I cannot open my ITunes music files.  How do I fix this problem. 

    Hey Joey BOD,
    It sounds like you can't open your Music app on your iPhone after the update? First, try force closing the Music app if it is open in multitasking, which you can find out how to do here:
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    And if that doesn't work, I would reset the device:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Have a great day,
    Delgadoh

  • I purchased an annual subscription to Acrobat Pro XI and installed two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that

    I purchased an annual subscription to Acrobat Pro XI and installed on my Mac two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that won't open. SOS!

    Hi Margot ,
    You can click on accept or buy ,which ever option you see on that dialog box.It will prompt you to type in your Adobe Credentials.You can license it by doing the same.
    If it still doesn't work ,follow these steps and see how it goes .
    Delete all the files from following folders:
    [Home]/Library/Application Support/Adobe/SLStore
    [Home]/Library/Application Support/Adobe/SLCache
    And, delete all files from following folder except cache.db
    [Home]/Library/Application Support/Adobe/AdobePCD
    Then launch Acrobat and try to activate and check.
    Regards
    Sukrit Dhingra

Maybe you are looking for

  • How to put check box in a table format at the out put ?  Urgent issue...

    Hi, I am working an assignment to assign multiple roles for multiplr user. In selection screen we have to enter mutiple EMPNO from ..to 1)  in second screen we will get the empno, First name, last name,  Position,     From  date, To date, Sap user ID

  • IWeb is not part of iWork'11

    When I got the Mac, iLife was installed. But as I slowly looked into my Mac, iWeb and iDVD was missing. I still can't find it and I really need to use it. They are not in the Mac App Store as well.

  • Does the hp psc 1210v all-in-one have the ability to print back to front?

    My hp psc 1210v all-in-one is still working and it is driving me crazy that this printer doesn't have the ability to print back to front. I am also upset that there is no software to print double sided like with the newer hp printers. Is it just me o

  • QM-WM customization step by step

    Dear all, It will be highly appreciated if anybody send step by step QM-WM customization and master data set up for different type of scenario in WM. I need it for implementation purpose. Thanks in advance.

  • How do i use Tokenizer?

    Hi all, i'm in need to use Tokenizer in my coding to get rid of all the tags (eg. <html> etc...) that i have read from some HTML files. The thing goes like this... I have used a buffer reader to read some HTML files for their contents. However, the b