I installed the new Firefox. Where is the yellow padlock icon for secure sites?

with previous versions of Firefox , there was a yellow lock icon on the bottom-right of the screen , an indication of a secure site. Now with Firefox 4 I don't see the padlock. Where is it ? thanks

The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button

Similar Messages

  • Since updating to the latest version of FF I don't see the yellow padlock when I am on an encrypted page - can you help?

    The yellow padlock icon used to be in the far right bottom corner and it was in the closed position when you are on an encrypted page like when you are shopping. I no longer see it there and I want to know where you have hidden it, or is it no longer needed. In that case how do you know if you are secure?

    The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server. So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL. The functionality of the padlock has been replaced by the Site Identity Button on the left end of the location (address) bar.
    This has actually existed since Firefox 3.0 so it is not new.
    http://www.mozilla.com/en-US/firefox/security/identity/
    https://support.mozilla.com/en-US/kb/Site+Identity+Button
    If you still prefer to have a padlock icon also then there is this extension. https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/

  • I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I impujted it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to ligtroom 4 I

    I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I imputed it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How do I get the serial number from my 3 version so I can activate my version 4 program

    If you have Lightroom 3 still installed, you can get it from there.
    If you don't and you have your box/disk, it should be on there.
    IF you don't have either of those,and you registered your software, you can log into your Adobe account and retrieve it there.

  • Problem with Office 2007 whenever I install the iCloud Control Panel for Windows

    Sadly I have a Win7 laptop as my work hack and am using Office 2007.  Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load.  I can't even open the iCloud Panel from within Control Panel either to set preferences!
    Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
    Any assistance would be appreciated.

    I tired everything that was suggested in the forum.  Tried IE and firefox to no avail. When I tried computers in stores both worked.  A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit.  As a last resort, I loaded safari on my home computer, and yep, it works.  Go figure, apple product.

  • How do i install the apple tv icon to my late 2010 mac air?

    how do i install the apple tv icon to my late 2010 mac air?   im unable to use my laptop to view videos or others on my apple tv

    If you are referring to AirPlay Mirroring, it requires OS X Mountain Lion or Mavericks and a Mid 2011 or newer MacBook Air, so you cannot use it and you will not see the AirPlay icon. See > http://support.apple.com/kb/HT5404
    Instead, you can use an application like AirParrot to mirror your Mac's display onto your Apple TV, so you can watch videos and show your Mac on the Apple TV

  • Error while Installing the Java Add-In for an Existing ABAP System

    Hi all,
    I need help, i am Installing the Java Add-In for an Existing ABAP System
    SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
    These are the last few lines on the sapinst.log.
    INFO 2009-05-21 12:35:12
    Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:18
    Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
    INFO 2009-05-21 12:35:19
    Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc.
    INFO 2009-05-21 12:35:19
    Creating directory V:\sapmnt\BIQ\jdbc\tbx.
    INFO 2009-05-21 12:35:21
    Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
    INFO 2009-05-21 12:35:22
    Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    INFO 2009-05-21 12:35:23
    Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    MOS-02001  Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
    ERROR 2009-05-21 12:35:42
    FCO-00011  The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
    Thanks in advance for any help.
    Kiran Chebrolu

    Hi,
    Hope this note would solve your issue, please read carefully and validate with your issue
    Note 1032019 - Java Add-In: Error when you create the SCS instance
    below notes give your suffice information.
    Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
    Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
    Note 1025789 - RUNR3CMD generates CPF0006
    regards
    nag

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

    After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out.  Also the scan function won't let me scan at any density greater than 150 dpi.  I have talked to Applecare and to HP tech support and been told "too bad."  Any help would be appreciated.

    THANK YOU!  And who are you?  I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words.  Many thanks!  John

  • Installing the Java Add-In for an existing abap system

    Hi, Currently we are Installing the Java Add-In for an existing abap system.
    Following the steps (Installation guide):
    1) We sucessfully installed the Central Services Instance (SCS)
    2) We sucessfully Installed the Database Instamce Java Add-In
    Our problem comes in the third step
    3) Central Instance Java Add-In
    When the system prompts me the SAP System Identification (Select the central instance of your local host).
    I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
    (The same value)
    I chose anyone, and click next.
    The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
    Any help is appreciated, and I will reward points if helpful.
    Regards

    I followed an advice made for a sap consultant, and delete some profile files.
    I had the following files
    DEFAULT.1.PFL
    DEFAULT.2.PFL
    DEFAULT.BAK
    DEFAULT.PFL
    DEV_DVEMGS00_bsomtymx005
    DEV_DVEMGS00_bsomtymx005.BAK
    DEV_SCS01_bsomtymx005
    START_DVEBMGS00_BSOMTYMX0
    START_DVEBMGS00_bsomtymx005
    START_SCS01_bsomtymx005
    after to delete the files, I have the following files
    DEFAULT.BAK
    DEFAULT.PFL
    DEV_DVEMGS00_bsomtymx005
    DEV_SCS01_bsomtymx005
    START_DVEBMGS00_bsomtymx005
    START_SCS01_bsomtymx005
    Then, I restarted the installation, and the sapinst allow me to continue with the installation.
    I really do not know if the installation will be sucessful, but this issue is solved.
    Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

  • Need i install the XI add-in for SAP Web AS 6.20

    I want to connect a 4.71(Web AS 6.20) as a business system to a nw2004s system.
    The scenario is JAVA<=>XI<=>RFC(Web AS 6.20)
    Do i have to install the XI add-in for SAP Web AS 6.20?
    Regards
    Ming

    Hi,
    For RFC connectivity you don't need to install any add-ins but incase proxy communication we needed.
    Thanks,
    venu.

  • How to install the Oracle ODBC driver for all NT users

    I need to schedule a task on a SQL server running on NT to access an Oracle DB.
    I have installed the Oracle ODBC driver on it and it is working well under my NT account.
    But the SQL scheduler runs on another NT account and the task failed.
    How is it possible to install the Oracle ODBC Driver for all NT users ???
    Thanks for your inputs...

    http://forum.java.sun.com/thread.jsp?forum=48&thread=187964&start=0&range=15#608968
    The above link is a comprehensive "How to get set up and on my way" that I made for someone else learning Oracle/jdbc. Kind of a self-help resource page. I would start from the beginning and download the newest drivers, then set up your environment,...etc.
    hope this helped,
    Jamie

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • How can I install the Amazon Kindle plugin for InDesign in InDesign CC?

    How can I install the Amazon Kindle plugin for InDesign in InDesign CC? I have it installed in InDesign CS6 and it works fine.

    Amazon has not updated the Kindle plugin for Indesign CC.

  • Want to reset the stored ID/Password for a site

    I need to reset the stored ID/Password for a site. I entered the wrong ID and clicked Save on the pop-up for saving password for the site. Turns out I used the wrong ID to login and now I can't reset it to the correct spelling. It keeps overriding what I type in.

    Highlight that entry in the drop down list and press Shift+Delete to remove it.
    * http://kb.mozillazine.org/Deleting_autocomplete_entries
    * http://kb.mozillazine.org/Password_Manager

  • The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

    When i tried to login in inbrowserediting.adobe.com i see that:
    The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
    What does it mean? What is problem?

    Hi,
    I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
    its saying the following
    "The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
    Yet i Can access my website fine "www.calmwood.com.au"
    My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
    so i am not understanding how it thinks its different. when its fully referenced
    any help would be appreciated.
    thanks

Maybe you are looking for