I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

Similar Messages

  • I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

    I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

    If the OS X 10.2 on the hard drive is/was bootable, try this -
    Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
    Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
    Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

  • How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

    How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

    Welcome to the Apple community.
    Only photos taken on the iOS device and after photo stream was enabled will be added to photo stream.

  • I bought an iphone 4s that was purchased from an apple store in canada and the iphone won't work here in south africa. what can i do?

    please help

    Do you mean that it is carrier locked?
    You would have to contact the carrier to which it is locked and see if they offer unlocking and if you qualify.
    Or does "won't work" mean something else?

  • Dear all,     Since  Friday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?

    Dear all,
    Since  wednesday  morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?

    Last night I wiped the phone and did a complete restore.  Lo and behold the wifi was working again after the restore finished.  GREAT.  30 minutes later went to look at the phone and no wifi again, great!
    So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later.  Clever chips these.

  • I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • The system extension "/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    My MacBookPro freezes and i have to force shut it down and restart.
    It then gives me these errors...
    The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tun.ke xt” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    What does this mean? How can I fix it so it doesn't freeze again.
    (All software up to date)

    hello,
    I have the same problem. does anyone have any ideas on what's going on and or how to fix it.
    Thanks!!
    Luis

  • Error on install then... A problem occurred while loading the system update"

    Hello,
    I have a ThinkPad X40. I tried to reformat it using the recovery partition, but that failed... great system huh? Anyway, i installed Windows XP using a different CD and i tried to install the ThinkVantage System Update and got an Error 1722.
    There is a problem with this Windows Installer package. A progam run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action StartSuService.EXE, location: ...\startsuservice.exe "
    It had placed an executable entry in my start menu, so i tried to run it and got "A problem occured while loading the system update......" which seems to have been experienced by a lot of people. Looks like i'm at a dead end here as well... So far the Laptop has been fine with everything apart from lenovo software...
    Any help would be greatly appreciated,
    Joe

    hello
    hear is the link for your thinkpad software check it out 
    thinkpad software downloads
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • I've installed a system update as requested, 10.6.7 but mail is not working now.

    I've installed a system update yesterday as requested, all software works fine, except Mail - I get the following message You have mail version 4.5 (1084/1082), it cant be used on Max OSX Version 10.6.7 (Build 10J869).  I've done a complete reinstall of my imac too, but this has not cleared the problem.
    Please help

    Please do this:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and quit the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Upon satisfactory completion boot from your Snow Leopard DVD and resinstall Snow Leopard. Upon completion you may wish to update it to Mac OS X 10.6.8 Update Combo v1.1.

  • What is this error message about, "The system extension "/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt" was installed improperly and cannot be used"?

    It appears as a window with the following text, "System extension cannot be used.  The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt” was installed improperly and cannot be used.  Please try reinstalling it, or contact the product's vendor for an update."
    I close it by clicking "Ok", and it doesn't seem to affect the system performance in any way, but it's annoying knowing that it's there.  The problem is quite old, and has persisted through several OSX updates.

    hello,
    I have the same problem. does anyone have any ideas on what's going on and or how to fix it.
    Thanks!!
    Luis

  • I just downloaded the newest update for mountain lion. After downloading and restarting for installation, I got a message stating that  the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version

    I just downloaded the newest update for mountain lion. After downloading any restarting for installation, I got a message stating that the update cannot be installed due to an error. Yet when I check I have version 10..8.3 and safari version 6.0.3, which the update was for.  Does this mean that the update is iinstalled and the message was incorrect?

    Brian Gallagher wrote:
    I just bought the Imac on Monday, which was placed on the shelf on Saturday. Its now Thursday and I have to update the machine. Heck I haven't even bought the printer or the new desk for all this stuff....ha ha.
    Good timing! Oh well, at least you shouldn't have to update again for a while. It will be nice kickstarting your Mac with the very latest System Update knowing any hiccups from 10.8.2 would have been ironed out if they were going to affect your workflow at all.
    Cheers and Happy Computing
    Pete

  • Can't install Thinkpad System update 3.14

    Hi everybody
    I own a T60 with the latest Windows SP3. I tried to install the latest version of the Thinkpad system update and when it nearly finished, i had this error:
    -There is a problem with this Windows Installer package. A problem run as part of the setup did no finish as expected, Contact your support personnel or package vendor. Action StartSuService.EXE, location: C:\Program Files\Lenovo\...\startupservice.exe
    After that, i can start anyway the system update but it never install sucessfully my update.
    Does anybody know any tricks to get over this problem?
    Thank you
    JM
    Solved!
    Go to Solution.

    I tried reinstall 4 to 5 times and redownload it 3 times so it was not that.
    Anyway i found the problem. It was the services who had been( for unknown reason) desactivate:
    So in services.msc i putted "System Update" to Automatic, then Start the services and it work.
    Sorry for trouble and thank for the help !!

  • The system update is driving me crazy ;)

    Hi,
    I have thinkpad w530, every time that I use the system update it's says that I need to upgrade the "Intel rapid storage AHCI driver". After I restart and open the system update, it's tells me again that I need to update the "Intel rapid storage AHCI driver", and the story go again and again…
    It's always change between these two versions: 12.8.10.1005 and 11.2.0.1006
    Thanks!
    Solved!
    Go to Solution.

    Which version of windows are you using? I assume win7.
    For version 12.8, on a w530, Win8 or win8.1 is required.  Per readme.txt, version 12.8, on a w530 running win 7 IS NOT SUPPORTED.
    Version 11.2 ,  runs on a W530, with  xp/vista/win7.
    Since you are win7, w530 version 11.2 is the correct version to use. You can tell Sytem Update to HIDE the version 12.8 offering. If you state your machine type (w530) and model number, Lenovo can check the Package bundle on the server and see if a bug exists in the Package. 
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gmir10ww.txt    <<version 12.8 readme.txt  .
    Read the readme.txt link above.  Follow the instructions stating how to determine which version is installed on your system.  Please state the version you have installed on your machine.   

  • HT4993 My iphone is frozen on a screen that says Itunes with a pic of a charger.  This was after i accepted the system update...what do i do

    My Iphone 4 is frozen.  It told me I had a system update.  When i clicked on the system update it froze on a screen with an ITunes circle and a picture of a phone charger.  I've tried turning it off and on, I tried to reset it, Sprint has tried to reset it. What do I do

    The device sounds as if it is recovery mode. Check the instructions in this support document. http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Switching harddrive between two macbooks ...

    I have a Macbook pro 13" (May 2009) and I want to buy the latest Macbook pro 13" model. In my existing model, I have a 256MB SSD disk with all my existing software and data, and therefore I don't wanna pay big bucks for an SSD disk in the new one of

  • Olap and Oracle report

    how can i build a report that combine data from OLAP source and data from a relational database is there any way to build report based on OLAP data that could take parameter from user at runtime to filter data seen please it's urgently required ...an

  • How to set video function like a default function when slip "camera" at lock screen ?

    Hi all. At lock ccreen: - We need to take the picture we turn on screen - slip "camera fuction" at the right bottom and take a shoot. - We need to record a video we turn on the screen - slip "camera fuction" at the right bottom and horizontal sliding

  • Fullscreen Gallery image gets erased when scrolling on Chrome

    I'm working on a website where we have an abstract video background playing behind a transparent logo, which when clicked scrolls the page down to the main content. The logo is layed over the video background as a single image in the Fullscreen Galle

  • Locks number

    Hi, on 10g R2, on AIX, the response time is very bad. I have this : SQL> select count(*) from v$lock;   COUNT(*)        225Is it realy a problem ? Any idea to investigate ? In alertlog no error message. I ran AWR and I have this Top 5 Timed Events