I installed the WRT54G Wireless router on my desktop and...

I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months. Last week I uninstalled Norton Internet Security and installed ESET Smart Security. Now my desktop cannot get to the internet and the advisor says it does not detect a router. But my laptop says it's connected to my network and I am able to use the intenet on it. The router itself has all of the correct connecions and the appropiate lights are lit. Could the ESET Smart Security Software have messed up my router firmware. Please advise.

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time

Similar Messages

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

DB Antenna Gain on the WRT54GS Wireless Router?

Anyone know what the dB Antenna Gain is on the Linksys WRT54GS Wireless Router?

The dBm Antenna gain on your Wireless Router is 18dBm.

WRT54G Wireless router works on desktop, but not laptop

I have a WRT54G wireless router with version 1.00.4
It works on my desktop, I can log into the net no prob
My laptop however (dell w/ windows xp) does not even recognize it.
Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
My desktop is windows xp, and so is my router.
Any helpwould be greatly appreciated.

i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
1.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
2.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
hope this will help you...
~ lyf_R_foeittee ;o) ~~

HT1365 just installed a new wireless router (cisco linkseys E1200) and our apple laptops connect fine on one floor but lose connectivity when moved to another. Other non apple laptops & Ipad connect with no problem no matter what floor they are on

We just installed a new wireless router to our main PC. It's a Cisco Linkseys E1200. All other wireless devices were able to connect without a problem, including my Ipad. We have 2 Macbook Pro laptops. They both connect just fine when on the same floor of our house as the router, but when we take them upstairs to the 2nd floor of the house, they lose connectivity and it states the wireless password is not the correct password. All other 2nd floor laptops have no problem at all with connectivity no matter where they are in the house. Please help- my husband is on the verge of selling Apple if that cannot be remedied.

This would not be a security issue symptom. I would consider checking for sources of wireless interference HT1365
Trying changing the radio channel on your wireless network.

Need help on the WRT54G wireless router!

Hello all! I need your help guys! I have a Linksys Wireless router WRT54G V4 and it was working fine till yesterday when a power drop happen in my neighborhood. I notice that my router was alright but when I tried going online it didn't work. So I resetted my router and ran the CD for all the steps and now it keeps reading that it can't pick up on my At&T DSL Modem. It keeps stating that I should see if it's on, which it is, and if not then try to turn it off then back on. Well, I've tried that and no luck!
My next step was to go the the router's setup page and do the setup through there. Ok, so, I've done everything right but when you go to the Status section of the page and push connect it reads that my PPoEp, or how ever it's spelled, has failed. In troubleshooting, I checked to see if my modem was bad so I connected the internet directly to my computer without the router and the modem works fine.
So there you have guys. What do you think is wrong or what should I do!? My 3 Year warranty has expired on this router and I'm not about to cough up $25-$29 dollars for tech support from Linksys. The router is still good. Every thing lights up and is in good shape.
My guess is that the port where the internet is connected on the router may be a bad port.
Suggestions!?

You can try these settings
Open reouters set up page ,under internet connection type use "automatic configuration DHCP",click on save settings.
Click on "mac clone" sub tab ,enable the service click "clone my pcs mac" & click save settings .
Now under status tab check the internet Ip address ,if you are getting public Ip ,then try going online .
If Ip is 192.168.1.x ,then under set up change the Local Ip address to 192.168.2.1. save the settings & power cycle for 1 min .
Then again try going online.
If Ip is 0.0.0.0,then use PPPOE under internet connection type & enter username & password provided by your
ISP .click on connect under status tab.If getting a valid Ip address try going online OR
Let me know the exact error message on status tab after clicking connect .

Trouble installing a wrt54g wireless router

I have been attempting to install my new router. When I hook it up exactly as instructed, my computer does not have a connection to the internet. I have a DSL connection and my desktop is running Vista. The laptop I want to connect is running XP. I do not know what I am doing wrong.

try to configure the router manually...by the way what is the brand of the modem you're using? do you get online automatically connected to the modem? or do you use a username and password?

Having a connection issue with the WRT54GS Wireless Router

We just recently got Broadband internet. We had issues with it at first, because the Ethernet cable included wasn't working properly, and instead, the guy got us connected via USB cable. Now, I just bought this Router yesterday, and made the mistake of unplugging the USB and plugging in the extra cable. I did everything as instructed in the Easylink Advisor program. My connection was messed up, and I could not connect at all. After calling Tech support, they reset our modem and everything (cable modem and internet-wise) is as good as new. I went out and bought a new Ethernet cable, so now I have 2 perfectly new cables, and left the USB cable plugged in, so I don't throw it off as I did yesterday. I still can't get the Port 1 light to come on. the WLAN light is on, as well as the Internet light, but no Port lights will turn on. Anyone have any ideas? Thanks in advance! -Chris-

Are you getting online via ethernet with the modem now? Make sure your local area network is enabled. Go to control panel then network connections.
Message Edited by Pio04 on 07-11-2007 11:47 AM

Question about the effective radiated power of WRT54G wireless router

Dear Sir,
As I knew that the output power of this router is 18dbm (about 64mW), can I have more technical information of the WRT54G wireless router as follow :
Q1) What is the effective radiated power output of WRT54G ?
Q2) What is the gain of each antenna in the WRT54G wireless router ?
Q3) Are there any antenna product of your company which offer higher dB gain and can be used in this router?
Q4) Are there any router product of your company which has higher effect output power. If yes, can you please offer a soft copy of the specification (including the effective radiated power output) of such router ??
I should be grateful if you can answer me through this forum
Many thanks.
Regards
Patrick from Hong Kong
(Mod Note:Removed email address.)
Message Edited by daikunzeon on 06-01-2007 03:02 AM

This is a community forum. Here are the people who use Linksys devices. Nobody from Linksys is here. For those details you have to contact Linksys. Go to their website and look for the "Contact Us" page.

Trying to setup my Linksys WRT54G Wireless Router but having trouble.

Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
If you can reply speaking English and not too much computer language that would be fantastic.
Many thanks

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

New WRT54G wireless router. Who's the genius that can help me?

I just purchased a WRT54G wireless router. The main reason is my son wanted to be able to use his Sony PSP online. I also have two desktop computers that will be wired thru this router. My question's are. If he is using his PSP online and the desktops are wired, can the desktops be "hacked" if they are on/off? If the router is turned off then the wireless is not working? If I access the router and disable the SSID Broadcast then the wireless portion of the network is off? What are the safest security settings to protect my network?
Thanks.

Dead Mans Zone.... I guess.
Using the DMZ is a very simple and risky way to forward ports. The DMZ takes an ip address of a computer on your network, and forwards all ports to that computer. This is really nice if you are having problems forwarding ports for some program. It can be a life saver if your router will not allow you to properly forward ports. It also has a huge downfall. The computer that is in the DMZ is now wide open to internet traffic. Meaning that it will catch virii, and it will be at risk of being hacked. If you put a computer into the DMZ then please install a software firewall to help protect it
Orange/White. The Cisco logo is the Router’s SecureEasySetup button. It lights up and will stay orange when the Router is powered on. The color orange indicates that the Router is not using the SecureEasySetup feature, while the color white indicates that the Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup mode, the Cisco logo will turn white and start flashing. After the Router has generated the SSID and WPA-PSK (also called WPA-Personal) key, the Cisco logo will stop flashing and stay white.
Message Edited by wehowardjr on 12-30-200611:26 AM

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

Trouble accessing the internet on a WRT54G wireless router

I’ve run into a problem setting up a wireless network at my friends’ house. The problem is accessing the internet from the wireless PC that has a WMP11 Wireless PCI Card to a WRT54G wireless router.
The wireless PC is running Windows XP and it sees and connects to the router with “excellent” signal strength but will not connect to the internet.
The router is currently set to WEP 128 bit encryption security. I’ve tried disabling the wireless security all together but when I do that the wireless PC no longer sees the router.
I have no trouble connection to the internet thru the wireless network I have set up at my house when I bring his computer there. But my router is an older Linksys 802.11b so maybe that’s why.
Anyone have any ideas what I should try other than telling him to buy a new wireless G adapter card?

If earlier your Wireless Adapter is working fine with the same network & computer .... try upgrading the drivers of the aqdapter .... from http://linksys.com/download .... uninstall the older drivers & reinstall newer drivers ....

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

I have WRT54G Wireless Router on my main computer (VISTA...

I have WRT54G Wireless Router on my main computer (VISTA) and I am trying to set up A Linksys Compact Wireless-G USB Adapter (WUSB54G) on my other computer (XP). It is all setup, however I am getting the message "You are connected to the access point, but the Internet cannot be found." To further complicate the issue, when I check the IPCONFIG on the XP computer, I get back some weird IP address that is outside my router's network, even though I'm using DHCP.
I know the router is working - my laptop associates through the wireless network with no problem, and I can access the network printer that is also wired to the router. The problem seems to be in the configuration of the old XP computer with the new WUSB54G adapter.

Try following settings ....
Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

I installed the WRT54G Wireless router on my desktop and...

Similar Messages

Maybe you are looking for