I installed windows 8 and have lost all sound! i have try everything help

I installed windows-8 last week and i am having nothing put proplems with it! I have no sound anymore?
This question was solved.
View Solution.

When requesting help it is always best to post full Model number and/or Product Number. Get your Product Number from the Service Tag attached to bottom, may be under battery.
Saves a lot of time to have this info posted when you request help rather than having to wait for attention, get the request, post the additional info and wait again...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • After an hp update today i have lost all sound. everything appears to be turned on and up? any ideas

    After an hp update today i have lost all sound. everything appears to be turned on and up? Any ideas?

    Never mind!!! After reading someone elses similar problem I applied their repliers advice and it works! Thanks.

  • HT4972 I recently upgraded to ios5 on my iPad,  I have lost all sound but YouTube and that still work

    After upgrading to ios5. I have lost all sounds,  y?

    Have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • I have a iPhone four and have lost all sound. Could someone plz. Assist me. Thankyou

    I have a iPhone four and have lost all sound. Please help.

    batemanacres wrote:
    I have a iPhone four and have lost all sound. Please help.
    Check the Mute Switch on the side.
    Refer to the User Guide for Settings > Sounds

  • I have a HP Pavilion dv7-1444 running Vista 64 bit. I have lost all sound.

    I have a HP Pavilion dv7-1444 running Windows Vista 64 bit. I have lost all sound. There's a red x next to the speakeer icon on the bottom right of the screen. I have reloaded drivers, checked Device Manager, tested sounds, HP Support Assistant says I have the latest BIOS installed. I tried a one prong earphone in the two prong headset and got no sound. The mute button and the volume slider don't work either. 
    Please help me if you can.

    @rerateusa
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I just got a new iMac yesterday. I connected my Itouch and it would appear I have lost all my songs! Can anyone help? This is my first Mac and I am very intimidated by it.I

    I just got a new iMac yesterday. I connected my Itouch and it would appear I have lost all my songs! Can anyone help? This is my first Mac and I am very intimidated by it.I

    How did you get your songs onto your iPod Touch?
    If purchase directly from iTunes you can download them again.
    If your iPod is synced to iTunes on a Windows PC, then, sync your iPod to that computer.
    If this is your first Mac, are you migrating from a Windows PC?
    You may be interested in Apple's support pages on switching to Mac from PC.
    http://www.apple.com/support/switch101/

  • I have lost all sound from my ipod classic

    i have lost all sound from my ipod classic, is there a quick fix, or is it totally had it????

    Reset the iPod - Press Menu and Center button for about 10 secs till the Apple logo comes On then release the buttons.
    See step 2 of this Apple support document.
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • It seems like I have lost all sounds.

    My phone won't ring nor does the keypad chime when I call out.  It seems like I have lost all sound unless I go in and change the ring tone.  Any ideas?

    Turn off the mute switch.
    Just above the volume controls.  If you see a red dot, it's on mute.

  • HT4623 I have lost all sounds to my applications

    I HAVE LOST ALL SOUNDS TP MY APPLICATIONS

    Have you Checked the  Mute / Silent  Switch on the Side of the Device...?

  • HT4623 I have lost all sound after downloading iOS 7

    I have lost all sound on iPad after downloading ios7 help

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • After update in ipad3 to iOS 7.1.1 I have lost all sound and the usual hard reboot, checking settings, etc have not worked. Help!

    How can I get my sound back on my ipad3? It has continually lost sound, but before I could do a hard reboot, reset settings, etc and get it back. After updating to iOS 7.1.1 the sound is totally gone and nothing restores it. Anything else I can try?

    Hi Mimipat72,
    There may be a couple of things that are affecting the sound on your iPad. It sounds like you have already tried restarting and resetting which are good general troubleshooting steps. I suggest first checking in Settings > Sounds and making sure all sounds are turned on. The following article describes these steps.
    iOS: Understanding sounds, ringtones, and alerts
    http://support.apple.com/kb/HT5800
    If the sound settings are correct and you still have no sound, the next thing I would check would be the side switch. The side switch can either be set to lock the rotation of the iPad or mute the sounds. If the side switch is set to Mute, make sure it is toggled to allow sound. If the side switch is set to Lock Rotation, you will need to open the iPad Control Center to make sure sounds are not muted. The following article explains these functions.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    Thanks for reaching out,
    -Joe

  • I have lost all sound.?

    Lost all sound even after checking the settings. Pleas help, thanks

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • New version of itunes didnt install correctly and i lost all my songs

    anyone know what to do if your computer doesnt finish installing itunes completley and youve lost all of your songs?

    Hello ry-z,
    The following article should be helpful in restoring your content to iTunes.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    Cheers,
    Allen

  • Apple support just did an iOS diagnostic quick test on my ipad3 .I have lost all sound except through my head phones since downloading IOS7 today.  now what? Do I just make a big sign on my truck saying beware ISO7 killed my ipad?

    apple diagnostic quick test on my ipad..a waste of my time?now what will they do for me.I lost my sound on my ipad3 except with earphones after loading IOS7 today.Was this apple support just some sick joke?

    You are kind van.22
    Yes I started simple.butons and settings all function.jack is clear...I know because the head phone signal comes on when it should . restart and reboot many times and did a reset all settings.Went to my buddies in the IPF and they are scratching their heads. went to apple support and they did a quick test IOS diagnostic .And that's how I  got to here at this sight.
    what I didn't mention was that after loading IOS7 my ipad on the glass by the power supply it was warm to the touch.
    all those hours reading and fiddling can make you loopy.
    I'm off to an apple store.Have to catch a ferry.
    oh by the way rebooting and restarting is good for your ipad it helps it organize itself.designed to do that.
    Thanks again vancouver 22

  • My games have lost all sounds.

    I suddenly have no sounds in any game on my iPad.  Sound works normally in non- game apps.

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Maybe you are looking for

  • Fix for iPhoto after upgrading to Yosemite

    After upgrading to Yosemite I was unable to open iPhoto. I moved it to Trash (do NOT empty trash after moving it here!!!) - then go to App Store and download iPhoto. You'll want to make sure you then go to your Finder and click on the iPhoto download

  • I-Series chipsets netbooting across subnets

    Hello all, Is anyone having issues attaching to tftp served netinstall images across subnet's with i-series hardware? Here's the situation, the netinstall.dmg was created form a factory build core i7 macbook pro mid 2012. Imaging on the same subnet a

  • Why can't I scroll or use MMB to open pages in new tab, when I have a PDF file opened in FF4?

    If I have a PDF file opened in firefox 4, I am for unknow reason unable to open pages in new tabs with MMB or scroll thepage up or down. The scroll function isn't working at all, and it seems like I'd be scrolling the PDF file, not the page of my cur

  • Customizing the CONCATENATE formula?

    I am creating a 1000+ url redirect file. I one column I have the url giving the 404 error, in the next column the correct URL, and in the third column the formula =CONCATENATE(A, C) This gives me the first two columns combined, great, but now I need

  • News videos will not play

    on my yahoo homepage my news videos will no longer play. they now tell me the video is no longer available