I installed Yosemite and now I have problems with my intuos tablet can i get some help

when I upgraded to Yosemite, I am having trouble with my Intuos tablet,

Does Intuos have an upgrade driver for Yosemite?

Similar Messages

When my itunes was updating our kid cacelled it and now i have no tiunes at all how can i get my itunes back HELP PLEASE ?

Hi when i was updating my itunes on my laptop our kid cacelled it and now i have no itunes any where .how can i get my itunes back HELP PLEASE ?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Installed update and now i have problems...help!!!

Ok so I accepted the last update sent by apple..updating itunes and quicktime and lord knows what else. Ever since my macbook shuts down to the screen that says "hold down power button for a few seconds to shutdown" with a bunch of other languages saying the same (i guess our version of blue screen. I attempted to call apple but in their new tradition its all about the dollar. So I dont have the resources to correct an update from causing havoc on my macbook. I have no idea whats wrong as I have not installed anything else since. Just now my macbook went to that screen seven times in less than 5 minutes and the kid on the other end of the phone was like "fee"..So i'm reaching out to you in hopes that someone can assist me in finding and fixing whatever is wrong. Perhaps someone else is having the same problem. I dont have a mac store near me either.

That's a kernel panic. Start with http://www.thexlab.com/faqs/kernelpanics.html for details on how to fix it.
Assuming you don't have a bootable backup/clone, I recommend that you get a bootable, external HD, and make a bootable backup/clone before updating. That allows you to revert to the previous good state without having to reinstall everything. Then, peruse these
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

I want to transmit and receive the transmitted audio signal using labview with usrp ...can i get some help to do soo...thanks in advance

plz help me

this example receives frames on the same port. By CAN design you cannot receive the frame you are transmitting. If you want to receive what you transmit in addition there are 2 options:
- use the second port of your CAN device for Receiving the frames you transmit
- use the Self Receiption mode (refer to the manual for further details ho w to use this mode)

I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 297
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
    [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
    [not loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
    [not loaded]    com.logmein.logmeingui.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
    [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
    [not loaded]    com.adobe.fpsaud.plist [Click for support]
    [not loaded]    com.google.keystone.daemon.plist [Click for support]
    [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
    [not loaded]    com.logmein.logmeinserver.plist [Click for support]
    [not loaded]    com.logmein.raupdate.plist [Click for support]
    [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    HP Product Research    Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    HPEventHandler    Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    LogMeInSafari64: Version: 1.0.660 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeIn: Version: 1.0.660 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    LogMeInSafari32: Version: 1.0.660 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 10.0.1 [Click for support]
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         7%    ocspd
         4%    WindowServer
         1%    kextd
         0%    ps
         0%    securityd
Top Processes by Memory: ℹ️
    137 MB    Microsoft Word
    120 MB    Safari
    86 MB    ocspd
    82 MB    CalendarAgent
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    310 MB    Free RAM
    1.89 GB    Active RAM
    1.55 GB    Inactive RAM
    544 MB    Wired RAM
    1.13 GB    Page-ins
    8 KB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 09:32:47 AM    Self test - passed
    Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
    Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
    Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

I just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

thanks,
in yosemite i installed englisg as a second preferred language, this worked!
Op 2 nov. 2014, om 22:55 heeft Barbara B. <[email protected]> het volgende geschreven:
i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6892596#6892596>
Is this the mac app store version? A number of people are having this problem. This is what adobe recommended in the past for fixing the problem, but as far as I know it doesn't work in Yosemite:
Mac App Store version is German | Photoshop Elements <http://helpx.adobe.com/photoshop-elements/kb/mac-app-store-version-german.html>
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6892596#6892596
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Installed lion and now I have a locked harddrive and do not have the persmissions, how do I fix this?

installed lion and now I have a locked harddrive and do not have the persmissions, how do I fix this?

Thanks for the link. It is a wealth of good info. I still haven't been able to determine what caused my crash, but with the link you provided I should be able to track it down. Hopefully it was just a one time thing. After using the power button and rebooting all seems ok now. Thanks again.

I downloaded Yosemite and now I have lots of pop ups and my safari isn't working correctly. How do I remove Yosemite?

I downloaded Yosemite and now I have lots of pop ups and my safari isn't working correctly. How do I remove Yosemite?

Click here and follow the instructions, or if desired, run Adware Medic; the second link is a direct download.
(115459)

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what

I have a macbook pro 1.5 years old ver10.7.5 and now having a problem with having to manually force quit after a hour or so of use to clear up memory(unit slows down) should I up grade iso if so to what and what is the correct procedure? Rick

To determine if it is, boot into Safe Mode and see what happens. http://support.apple.com/kb/HT1455
In the Activity Monitor, what are the Page Outs and Page Ins?

Installed Yosemite and Microsoft Office does not work. How do Apple do it? Help!!

Installed Yosemite and now Microsoft Office does not work. Help!!

What version of Office is it, and what version of OS X were you running prior to your upgrade? You need to be on Office 2008 or later, and Office 2011 is preferable.

Hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?

hi i have just completed an imovie project and tried to save a hard copy on the desktop so i dragged the project file from the home page then movies folder and now the prioject seems to be lost , how can i get it back ?

It's a Finder feature, related to Quick Look. You can hit the space bar in the file list to get a preview.
If that doesn't work, you may have an issue witha preference file or similar. I find rebuilding the launch databse works quite well resilving tis kind of thing, as does trashing Finder preferences

Hi! My photos have duplicated themselves to my photo library and now i have 2 of every picture, how do I get rid of them to just have one of each picture again..?

Hi! My photos have duplicated themselves to my photo library and now I have 2 of every picture, how do i get rid of them so i just have 1 of each again..?

My DeDuper script is designed to help clean up. See this thread for background.
tt2

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!

You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

I installed Yosemite and now I have problems with my intuos tablet can i get some help

Similar Messages

Maybe you are looking for