I joined this community in error and don't know how to delete myself from the group. Can someone please advise me on this ?
I joined this community in error and don't know how to delete myself from the group. Can someone please tell me how to do that ?
Thanks,
Skeebo
Similar Messages
-
I have updated my iPad 1 to iOS 5.1.1. Now I cannot email from pages . Cannot anyone help me please ?
Hi Lila,
Bring up the document you want to email, and tap the wrench in the upper right-hand corner. Under that Tools icon you will see several options, select Share and Print.
Select Email Document
Then select the document format you wish to send the document in: Pages, PDF, or Word
Tap on one, and the document will format into that selection, and then take you to a blank email page with the document attached and ready to go!
Hope this helps!
Cheers,
GB -
I just installed CS4 and don't know how to UN-install CS3. Who can help please?
I found that all of the CS3 products are still installed on my HD - would like to uninstall them but don't know how.
Use the uninstaller on the CS3 DVD.
-
I have a 16gig ipad. I want to get rid of quite a bit of stuff that I have purchased to create space because I can't sync with my itunes library on my laptop. I dont know how to delete from the ipad. Can anyone help please? Terry
Typically you can delete content on the iPad one of two ways - swipe across an item in list view to bring up a red delete button or tap and hold down on an icon to bring up an X to delete option.
Why dont you connect your iPad to your laptop and transfer the purchases and then select exactly what you want to sync to the iPad. You don't have to delete anything this way.
Transfer purchases.
http://support.apple.com/kb/HT1848 -
I forgot my password to my mac book and don't know how to reset it in the security privacy field
i forgot my password to my mac book and don't know how to reset it in the privacy security field, can anyone help? Thank you.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
If you're running 10.7 Lion check this article
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
I got a new computer and don't know how to get music from ipod touch to itunes library
I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library.
You need to transfer the iTunes folder from the old computer to the new one.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527 -
I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?
Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt -
Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John LeeLooking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page. -
I wanted to buy a song from Midnight in Paris but couldn't get it in the USA, so got into the French ITunes Store. I got there and now can't get back to the USA iTunes store because (1) I don't know how to speak French and (2) I have no clue how to get back. Can someone help me?
Hi. Try this: From the iTunes Store front page, scroll to the bottom of the page. In the bottom left corner there should be a flag, in this case the French flag, click it and you 'll be presented with a screen to select the correct country.
Stedman -
I have 8.3gb of other on my iphone 4 and don't know how to get rid of it. Can anyone help?
I have all this other taking up all my memory and I don't know how to get rid of it. I need help!
Other indicates data that iTunes doesn't recognize. This can be caused by an interrupted sync or some other data corruption. Sometimes, just adding another song or app can clear up the problem.
Most often, you will need to Restore your iPhone. This explains how: http://support.apple.com/kb/HT1414 -
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
Keep getting error and don't know how to fix...
ok, I keep getting this nullPointerException error.. and I have no clue what I've done wrong.... I believe its on the client side of it... because when I run just the client.. the try catch should make it be like "can't find host" but instead.. it just sits there.. the cursor blinking.. and Idk why.. so if you could please help me!!!!!!! heres the server and client code
import java.net.*;
import java.io.*;
public class SocketServer extends Thread
private static Socket socket = null;
static boolean forever = true;
static RTS2 rts;
public static void main(String[] args) throws Exception
ServerSocket serverSocket = null;
try{
serverSocket = new ServerSocket(5454);
}catch (IOException e) {
System.err.println("Could not listen on port.");
System.exit(1);
Socket clientSocket = null;
try {
clientSocket = serverSocket.accept();
} catch (IOException e) {
System.err.println("Accept failed.");
System.exit(1);
while(forever)
try{
ObjectOutputStream oos =
new ObjectOutputStream(socket.getOutputStream());
oos.writeObject(rts.getCompany());
ObjectInputStream ois =
new ObjectInputStream(socket.getInputStream());
rts.setEnemy((Men)ois.readObject());
socket.close();
} catch (Exception e) {
System.out.println(e);
e.printStackTrace();
import java.net.*;
import java.io.*;
public class SocketClient
static boolean forever=true;
static RTS2 rts;
static Socket socket = null;
static ObjectInputStream ois = null;
static ObjectOutputStream oos = null;
public static void main(String[] args) throws Exception
try {
socket = new Socket("josh", 5455);
ois = new ObjectInputStream(socket.getInputStream());
oos = new ObjectOutputStream(socket.getOutputStream());
} catch (UnknownHostException e) {
System.err.println("Don't know about host");
System.exit(1);
} catch (IOException e) {
System.err.println("Couldn't get I/O for the connection");
System.exit(1);
while(forever)
rts.setEnemy((Men)ois.readObject());
System.out.println("hello");
oos.writeObject(rts.getCompany());
oos.flush();
}ok so that was a silly mistake I made... yet it didn't fix the problem... whenever I run just the client, shouldn't it not find a host and not just sit there blinking? but when I do run the server then run the client I get this error from the server side
java.lang.NullPointerException
at SocketServer.main(SocketServer.java:32)
which is when it starts the ObjectOutputStream and such... so I can only assume the problems on the client side, I bet its something easy too that i'm missing.. lol -
All the photos from my computer were transferred to my iphone. I don't know what I did to make that happen and I can't even delete them from my phone. I had to reset and restore my phone to original settings and lost all my iphone photos and contacts and messeges. Has this happened to anyone who might know how to fix this or next time I sync my iphone to prevent the photos from my computer from downloading onto my phone?
You delete them the same way you put them there. The sync process. Open itunes, connect iphone, select what you want on the iphone, sync
Click Support at the top of this page, then click Manuals, for a copy of the manual -
didn't realize that a keyboard lock button was added to the draw down window on the front of the phone and inadvertently hit it, turning off my keyboard rotation. before I got someone who knew about the keyboard lock button, I goat a moron who told me to reset the whole frickin phone so now am in the process of redoing 8 months of phone prefference settings. is the "globe" button for the long range and pages of icnographs an app? I don't remember how we got it and neither does my wife
Musicman,
Settings>General>Keyboard>Keyboards>Add New Keyboard>Emoji.
Maybe you are looking for
-
Use of javax.jdo.Transaction in BMT
Sections 16.1.3 and 16.1.4 of the JDO spec (version 0.95) state that the application code with a Bean Managed Transaction has the option of getting a Persistence Manager before a UserTransaction is opened and managing the transaction through the java
-
Issue with starting tomcat in windows for webcenter sites installation
Hello All, I have been trying to install oracle webcenter sites on windows 7, I followed all the steps in the documentation for the configuration and setup. but anytime I start the tomcat using the startup.bat script I get errors as shown below. C:\W
-
I am trying to build a query that sums up 12 columns depending on some accounting variables. example: SELECT gbmcu, gbco, gbfy,'',SUM(gban01 gban02 gban03 gban04 gban05+gban06+gban07+gban08+gban09+gban10+gban11+gban12) AS Oil_Volumes FROM PRODDTA.F09
-
HI FRNS,I AM CREATING A REPORT TO GENERATEMA PDF FOR THE SPOOL REQUESTS...... IN THAT I M GETTING ERROR AS "SPOOL REQUEST NO ### CONTAINS NO ABAP LIST DATA" CAN ANY ONE HELP ME...
-
Reporting Agent filename convention and result directory
Hi Experts, We are using BW 3.1 so the questions below are refering to this version of BW. I have to run a query on a monthly basis which has many results depending on a cost center input. The problem is that I need to make a standard filename conven