I just bought a 15" macbook pro and when I try to upload final cut pro it tells me that the power pc does not support the application any longer.. is there a solution to this problem, other to buy the program again?

I tried to upload final cut pro on my new computer but it says that it no longer supports the application is there anything I can do to make it work?

I assume the MBP is new and you have Lion on it (10.7)?
Here is what will run:
http://support.apple.com/kb/HT4769
charlie

Similar Messages

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

Hello Sheila,
Thank you for the details of the issue you are experiencing with FaceTime. It sounds like your Apple ID password is not being recognized.
You can reset your password using the steps in the following article:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
You can contact the Account Security team if you are unable to reset your password using those steps:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this?

I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from there, but it won't let me do that. It is forcing me to set up on the iPod. Am I doomed to have no iCloud account because I opted for a used device?

See this previous discussion.
icloud: The maximum number of free...: Apple Support Communities

If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

When I try to upgrade final cut pro x, the app store wants me to buy a new version, why?

when I try to upgrade final cut pro x, the app store wants me to buy a new version, why?

Item
Artist
Type
Unit Price
O Brother, Where Art Thou? (Soundtrack from the Motion Picture)
Write a Review Report a Problem
Various Artists
Playlist
$5.29
Final Cut Pro, v10.0, Seller: Apple Inc. (4+)
Report a Problem
Apple®
App
$299.99
Subtotal:
$305.28
Tax:
$24.73
Order Total:
$330.01

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault. Does not allow program to open. Help

When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault. Does not allow program to open. Help

Use this free tool to trash FCP preferences: http://www.digitalrebellion.com/prefman/

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone. Is there a fix for this?

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone.

My husband and I both have iphone 4's and we both have this same problem. I have an open ticket with apple, but so far they haven't been able to figure this out. First, they told me the problem was the mail server I was using. So, I tried sending/receiving invites from gmail and yahoo which they told me should work. Neither did. It doesn't matter whether the original invite was created in iCal or in Outlook or Google, once I open the invite in my mail and hit "add to calendar" the event is locked into my calendar. If the originator sends an update or cancels the meeting, I will receive an email with the new info, but the event doesn't change in my iphone calendar. This is completely lame. Why bother putting a calendar app on the phone if it can't handle basic functions?
Did you ever get a response from anyone or figure out a workaround? I'll post if I hear back from Apple with a fix.

I'm getting an error 100 when i try to download final cut pro x

I'm having an issue in downloading Final Cut Pro from the Mac App store. I've seen all the "log out, then log in then stand on your head" steps to make it work but it doesn't. I can download apps, just not Final Cut. I've uninstalled my trial version but am still getting the error 100. I'm running a mid 2009 mac mini with a (2 GHz Intel Core 2 Duo, NVIDIA GeForce 9400 256 MB, and 8 GB of memory). Any help would be appreciated.

Hi Aldo,
Please let me know the below details, in order to help you further.
What is the error message that you're getting?
What is the version of Mac ?
~Mandy

Firefox is not responding and will not connect beyond start page. It will not close properly or restart. Is there a solution to this problem?

2 days ago, firefox just stopped responding. When I open, the start up screen shows but navigating to any other web pages is not possible. All I see is "connecting" and it just spins. No warnings or time outs. I thought it was an issue with my firewall so I went in and manually added firefox to the list of "allowed". That didn't help. I removed all apps, extensions and themes then tried to reset.. that didn't help because firefox wont restart it just hangs and I have to use task manager to end the process. I have tried a forced uninstall then reinstall.. nothing. At this point nothing seems to work. Maybe there is a simple solution I'm just not seeing. For now, it is uninstalled but I really would like to know if there is a way to fix it because firefox is my favorite browser. I'm not finding any maleware or viruses on my computer and other browsers are working just fine.

Great to hear. Please flag your last post as '''Solved Problem''' so
that others will know what to do.
Happy Computing.

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

Did you try rebooting?

I just bought an Ipad and find that it is not compatible with Adobe flash player which I need to play Bridge on line on BBO. Is there a solution for this problem?

I just bought an I pad abd find that it is compatible with Adobe Flash Player which I need to play bridge on BBO. Is there a solution to this problem?

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

I Just bought a MacBook Pro and when i try to get the free download of Lion it aks for my details but one of them is State which only alows 2 charecters and I live in spain....

Just bought a MacBook Pro and when i try to get the free download of Lion it aks for my details but one of them is State which only alows 2 charecters and I live in spain....
How do i get my free Lion update????

Thx i found the answer
https://discussions.apple.com/message/15658181#15658181

HT1751 I am trying to backup my iTunes library onto an external hard drive but it won't complete due to 'insufficient privileges for some of the items'. Am I doing something wrong and is there a solution to this problem?

Hi All,
I am currently trying to backup my iTunes library onto an external hard drive so that I can copy it onto my new Macbook Pro. I have been following the steps posted on the Apple website however each time I get a dialogue box stating:
'The operation cannot be completed because you do not have sufficient privileges for some of the items'.
Is this because I have items that were bought under another persons iTunes account? If so, is there a solution to this problem? Or am I doing something completely wrong?
Thanks in advance,
Sbrooks19

Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820

I just bought a 15" macbook pro and when I try to upload final cut pro it tells me that the power pc does not support the application any longer.. is there a solution to this problem, other to buy the program again?

Similar Messages

Maybe you are looking for