I just bought a Canon printer, and cannot get it to print on the wireless printer

I cannot get my Canon printer to print from my Ipad. The printer has AirPrint capabilities.

http://www.apple.com/support/iphone/assistant/airprint/
http://support.apple.com/kb/ht4356#How_to_Print

Similar Messages

I just bought an ipod nano and cannot figure out how to sync the music from itunes onto it. i go to itunes and nothing happens. Is there a sync button im not seeing? I get my playlisits but that is it.

just bought an ipod nano and cannot figure out how to sync the music from itunes onto it. i go to itunes and nothing happens. Is there a sync button im not seeing? I get my playlisits but that is it.
ALSO does anyone know how to have 2 ipods on 1 computer but seperate?

Hi there,
I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
-Griff W.

I have just bought new iPad Air and cannot get it to start.

I have just bought new iPad Air and cannot get it to start. Am I doing something wrong or could there be a fault in the new iPad?

OK - Item turned out to be faulty and was returned to seller for replacement. No futher follow-up required.

HT201335 I have just bought apple TV but i cannot get my TV to find the signal from my Ipad 2. I can access my MAC files and play those through home sharing but no streaming from my ipad. It as though the Apple TV is not receiving the signal. What am i mi

I have just bought Apple TV 2 and have followed all of the steps as directed. I have set up home sharing so I can watch the files from my MAC on the TV but I cannot get the airplay to stream my Ipad2 to the TV.
I cannot even get my Apple TV to recognise that my Ipad is even on the same network as it as it gives me no options or recognition that it is trying to send the data.
What have I missed to make my Ipad2 stream the screen image onto my TV...?
Frustrated am i with it...!!

I took a very quick look at the Owner's Manual for that Router.
Much of this you will already know....but:
1. Its a combination DSL modem/WiFi Router
2. It does not have ariel antennas. My experience, the WiFi tends to perform poorly compared to standalone WiFi units and the WiFi range is also limited thus slower the farther away you get (or Apple TV gets)
3. If you don't have a DSL filter infront of it I recommend using one, even if you don't use phones. DSL comes in the pair as a different frequency and its "probably" best to filter it out anyway.....even though it comes in on a dial tone and a dial tone often exists
4. Let me know who you ISP is and I will find out what other Routers they offer.
5. You can buy pretty much any DSL modem / Router online assuming it supports PPOe which most DSL ISPs use
6. If you have not in fact tried running an Ethernet Cable.....try it.....you can get a 100 footer locally for just a few bucks. It could solve a heart ache

Hi, I've just bought a iPhone 3G and cannot get it to work.

I can get the wi-fi to work but it says no service all the time.
My friend that I bought it off said that he needed to get a porting code, for which he's done. My friend also said that its an unlocked phone so cannot work out the problem. Please help as I only have 2 days left before its my sons birthday and would rather give him a working phone.
Thanks in advance
Glenn

Just found the following info regarding non installation of iphone driver, do you know how I can get the correct driver reinstalled or updated
I have saved a copy of the report as a Pdf File but dont know how to attach it to this message do you have an email address I can send it to?????

I just bought a new iMAC and cannot print with my old HPO Officejet G85 all in one printer. How do I get the printer working.

I just bought a new iMac and cannot get my old HP Officejet G85 printer to work. What can I do to get it to print from the computer?
JC

The list of supported printers is below. Yours isn't on it.
OS X: Printer and scanner software available for download

I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The sy

I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The system is asking for my original serial number which I don't have. The point is. If I have the upgrade registered with my Adobe account, shouldn't that be proof that an earlier version was on my computer??? I'm really stuck. Need some advice! Thanks
Linda

Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda

Hi i just bought a iMac 24'' and i can't seem to load the cd drive it will not grab it in!! can anyone please advise? thanks john

hi i just bought a iMac 24'' and i can't seem to load the cd drive it doesnt do anything!! can anyone help?
thanks

The last 24" was a 2009 model and they started in 2006, so which one is yours?
Here is a list of all 24" models:
http://www.everymac.com/search/search.html?cx=partner-pub-8015755554271706%3A2ho jc0-6s67&cof=FORID%3A11&ie=ISO-8859-1&q=24%22+imac&sa=Search&siteurl=www.everyma c.com%2F&ref=&ss=2299j974627j9
All of them had a built in Superdrive. It could be dirt (easy fix) or a malfunctioning mechanism (happened on mine) - in that case, it would have to be replaced and you may be better off getting an external drive (less expensive).
And, you said it has 10.8.5 installed? Did the seller give you the original install DVDs? You will need those sooner or later.

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

I just bought a new album and it isn't showing up in the library

I just bought a new album and it is in the source folders, but is not showing up in the library and i can't listen to it... please help

the rest of my music still works fine!

HT1937 I just bought a gift card and it said they would send me the redeem code in the email and they didn't, how do I get it? This makes me furious because its just another little scam of theirs to pisss you off and make you wait a other week for the mon

I just bought a gift card and it said I could redeem the code straight away
Where is my rede code because it certainly is in the e ail they sent me

I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.

I just installed a new router and cannot get my ipad to connect now and I have no idea what settings should be or how to go about this

I just installed a new router and cannot connect with my ipad now. I have no idea what settings I shold be looking at or how to do this

you likely need to setup your router using an eathernet cable and a computer to turn on the wifi part and set an encryption level and password or the likes
if you havent do such things before you may require help from somebody who have
the router likely comes with an instruction manual how you set it up the first time

I Just up graded to Maverick and cannot get Face time to work

I Just upgraded to Mavericks and cannot get FACE TIME to work? Any suggestions?

Hope info from this article is helpful.
http://support.apple.com/kb/HT2090
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

I just bought a Canon printer, and cannot get it to print on the wireless printer

Similar Messages

Maybe you are looking for