I just bought a compaq Presario CQ57 and cannot connect my printer. I have called tech support but n

I called tech support but no  one there speaks understandable english...what do I do?

Are you following these instructions in the Notes in the article above?
Notes:
Avoid connecting AirPrint-capable printers to the USB port of Apple AirPort Base Stations or Time Capsules. Doing so can enable traditional AirPort printing from a Mac, but it will not enable AirPrint functions for iOS devices. If you cannot use Wi-Fi networking to connect the AirPrint-capable printer, use an Ethernet connection from the AirPrint-capable printer to the Apple AirPort Base Station or Time Capsule.
Wi-Fi printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the printer is connected to the Wi-Fi network before attempting to print.

Similar Messages

  • I HAVE JUST BOUGHT AN I PHONE 4S AND SUCCESSFULLY JOINED I CLOUD, ALSO ON MY PC. BUT I HAVE USED A DIFFERENT SIGN IN E MAIL ADDRESS THAN ON MY ORIGINAL I PAD. HOW CAN I CHANGE THAT TO THE NEW E MAIL SIGN IN ?

    I have just bought an i phone 4s and successfully joined i cloud, i have also successfully linked up my pc with i cloud. However my i pad is a little older, and when i signed on to i cloud some time ago i used a different e mail 'sign in' address. How do I change this in order to link all three devices. Thanks in anticipation, David.

    Go to Settings>iCloud, tap Delete Account and provide the password (if using iOS 7), then sign back in with the ID ("email sign in") you want to use.

  • Just bought the new iPhone4S yesterday, and my back camera isn't working/loading up. But my front camera works fine. What's wrong? Can anyone help?

    Just bought the new iPhone4S yesterday, and my back camera isn't working/loading up. But my front camera works fine. What's wrong? Can anyone help?

    I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
    Good luck!

  • HT5569 I just bought a new ipad mini and cannot figure out how to sync it to wi-fi, can you help me?

    i just bought a new ipad mini and cannot figure out how to sync it to wi-fi, can you help me?

    Tap Settings > WiFI. Look for your WiFi access point and tap that. Enter your password. Done.

  • Just purchased a 3rd generation iPad and cannot connect to house wifi.  It keeps searching for a connection but the gear wheel just keeps on turning.  The wi-fi spot is listed and I entered the security WEP code. I connected a Macbook without problems.

    Just purchased a 3rd generation iPad and tried to go thru the startup and connect to the house wi-fi.  Found the house wi-fi among the listings and was prompted to enter the WEP security code.  Gear wheel just keeps on turning and a connection is never established. I have tried this 4 times with the same results.  A desktop computer is connected and I easily connected a Macbook without any issues. Suggestions would be greatly appreciated.

    Try Settings, select the network name, click on the blue arrow to Forget This Network and try signing in again.

  • HT4235 I just bought a new Ipod Nano and cannot get it to sync with my computer. I downloaded the latest Itunes before I started but it doesn't sync. The diagnostic test says that my Ipod isn't detected. What can I check?

    I cant get my Nano to sync to my computer. It is new and and I downloaded the latest Itunes last week. I hit sync and it makes a sound within a second and then says it is done. What can I check?

    Hey OBandPL,
    I would use the following article to run through the recommended syncing steps one more time:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I accidentally deleted bonjour and cannot connect my printer, how can I connect my printer?

    I accidentally deleted my Bonjour how can I hook up my printer??  Snow Leopard 10.6.8

    Since it is a preinstalled apps, you can not delete it. As Ann said, depending upon your phone and OS, you can disable it. Check in the apps drawer. If you can not find it there, go to Systems>Application Manager, then flip the top files to "all". Next flip down the list until you get to Google Play Store. Tap on it and you will see a key titled "Enable". Tap on this and it should return to normal. You probably will have to put it on a home screen, if you want to.

  • TS1398 my wifi connection on our mini ipad is grayed out and cannot connect to wifi, I have tried resetting and that did not work.

    Our wifi  is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?

    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
     Cheers, Tom

  • Iphone 4s disabled and wont connect to itunes i have tried recovery mode but still wont connect to itunes

    please help my iphone 4s is disabled and i cant connect to itunes

    Hi, icaruss96.  
    Thank you for visiting Apple Support Communities.  
    Thank you for visiting Apple Support Communities.  
    If your iOS device is disabled, here is an article that I would recommend going through.  
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
    http://support.apple.com/kb/ht1212
    Cheers,
    Jason H.

  • I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

    I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
    I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC.  When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
    If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
    I have replaced the network cable but to no avail.
    Any suggestions?

    It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
    One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Compaq Presario CQ57 Laptop System Bios recovery problem

    A customer of mine has a Compaq Presario CQ57 that has developed a BIOS problem.
    I am unsure if it had had a BIOS update through HP Support Assistant or if it just decided to start for no reason but it now intermittently decides to recover the System BIOS at start up.
    It is all very random. It may not do it for a while - working fine every time it is switched on - but then just decides to go into this recovery. Sometimes the recovery sorts it first time, sometimes it has to go through the recovery mode several times before it sorts it out. Once sorted, Windows and the laptop work fine.
    I have tried to remedy it by installing BIOS updates. There are 4 available on the HP website. I have installed all four at various points - sometimes they install, sometimes they fail. Sometimes the recovery mode kicks in straight after - usually after a fail which makes sense. Other times it will work OK for many start ups and then just go back to it's old tricks.
    Any suggestions would be very helpful.
    Thanks in advance.

    Hello rmaiden,
    Welcome to the HP Forums!
    I understand your Compaq Presario CQ57-212NR gives you an error after running the system recovery.
    Can you tell me if this error loads within Windows or if it prevents you from starting up.
    I would suggest you acquire an ISO image of Windows 7 and burn it to a DVD. Use this to install Windows and then run the recovery after. This should remedy the problem.
    Let me know if this works for you!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • My compaq presario cq57 wont download any new files.

    hey guys I'm in need of some help. After doing a system recovery my computer will no longer download any new files from the internet. from browsers to games I've tried it all. and nothing will download. it keeps coming up with a message that says that it can not find the file that im trying to use. so i was wondering what might be causing this and ho wi would fix this, if its possible to fix.

    Hi @christian12 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq Presario CQ57 Notebook and issues with installing drivers. First, try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started. Restart the computer after this step and try installing again. If this is not automatic and started that is why you can not install drivers.
    Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can I put a SATA 3 Solid State Drive in my Compaq Presario CQ57-447SI?

    I would like to upgrade my Compaq Presario CQ57-447SI and replace the hard drive with a solid state drive.  I'm considering the OCZ-Vertex-4 2.5 inch SATA 3 Solid State Drive (128GB) but I'm not sure if this will be compatible with my notebook?

    Hi:
    If a SATA II drive is a lot less, then probably yes.
    Notebook specs are very sketchy. 
    The chipset may be capable of SATA III transfer speeds, but HP may not have SATA III controllers on the motherboard.
    http://www.intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-hm65.html
    As you can see from the specs at the link above, the chipset has 2 SATA III ports and 6 SATA II ports.
    You would think that HP would hook up the primary SATA AHCI controller to one of the 2 SATA III ports, but that may not be the case.
    That is the best I can do for you since I don't have your notebook and cannot confirm the speed the drive runs at.
    So, if there is not much of a difference in price, I would take a gamble on the SATA III SSD.
    Paul

  • Bios on compaq presario cq57 keeps recovering every time I boot

    Relatively new laptop. It is a Compaq Presario CQ57 running windows 7 64 bit. Up untill recently everything was fine but about a week ago it started failing to boot and then after turning it on and off, going into the bios recovery. It goes through this (sometimes more than once) before finally giving a message saying bios recovered, error 500 (and to look here for assistance). The issue seems intermittant. Sometimes it boots fine, other times it takes several attempts with the automated recovery. I think the automatic update for the bios has run once or twice, but I didn't notice any updates immediately prior to this issue starting.
    Does anyone have any answers. Thank you.

    No ideas anyone? Took me about an hour to get the thing to boot today. Several attempts at turning on and off during which it wouldn't even POST, and then once it did post, the bios recovery system ran through several times before I finally got back into windows.
    The exact computer model incidentally is a CQ57-364EA.
    I'm trying to figure out if this is a software issue or whether there is a hardware failure somewhere. I'm figuring it's software, because when the computer does finally boot, it works normally.

Maybe you are looking for

  • Problem with Zen Microph

    Hi all... I have just bought a Zen Microphoto and have installed everything on the CD, but when I connect it to my computer, it can't find a driver for it - even though the CD still is in the dri've... I have also been trying to charge the battery, b

  • Flash Player Causing Whole Computer to Run Slowly

    Everytime I go on a page that uses flash content (which is quite often) it causes my computer to run really slowly and I am constantly having to restart it. I have tried uninstalling flash player and re-installing it, re-installing internet explorer,

  • Session state protection disables running of pages without argument

    Hi all, Shared Components=>Security=>Authentication Schemes=>Application Express - Current I did the folowwing steps : Shared Components=>Security=>Session State Protection=> Set Protection button in the folowwing screen press Enable followed by next

  • Is Cisco anyconnect lisence required

    Hi, I have a case where we have proposed Cisc ISE basic and advanced lincense for around 10000 users. Customer is asking for 802.1X supplicant, we are saying to the customer that 802.1x will be taken care by the operating system and that NAC agent wi

  • Organizational Forms Library FORM LOAD FAILS for one user

    I have a user who is unable to pull up any of the forms listed in the Organizational Forms Library under the Developer Tab within Outlook 2010. Any other person on the same PC has no issues with the same thing. The user in question does not have any