I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

Similar Messages

I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
Thanks

Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?

Problem with hp laser jet 9050 mfp and port security

Hello,
I activaded the port-security configuration in all the printers that we have. I've noticed that all the printers send an ethernet package that includes the same mac address 1a3c.30a9.5a8f in all the cases and this makes the port go to shutdown. I have changed the configuration to a restrict mode to avoid the shutdown in the printers.
But it keeps sending the message. So I want to know if its the switch doesn't know how to interpretate it or if its a problem with the printer?
The switch i have is a Catalyst 4500-RE and here it's a log from the issue.
Nov 11 12:40:22 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port GigabitEthernet4/24.
Nov 11 12:01:45 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port GigabitEthernet3/25.
Nov 11 12:03:58.757 CENTRAL: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 1a3c.30a9.5a8f on port FastEthernet7/16.
Thanks for the help.

Hi,
this address has got the U/L bit set and even flipping the bit doesn't get any result in the IEE OUI database.
Can you post sh port-security address output.
Regards.
Alain

I just bought a NEW Pro... and there's a "Reminder" already in the Reminder app. How worried should I be?

I bought a new 13" MacBook Pro less than a week ago. Today, I opened the "Reminders" app and in the completed section was a reminder dated January 23rd, 2012 (today is June 14th, 2013!) and it says, "Be a *****". According to this site, http://www.chipmunk.nl/klantenservice/applemodel.html, the computer was manufactured in May 2013, so the date is probably made up. Should I be worried about whomever was messing with my computer? Worried if maybe they put a keystroke logger on it or something? Should I call Apple? I expected a new computer, not a used one. Thanks.

EDIT: I mean that the January 23rd, 2012 date was made up, not the manufacture date.

Hp laser jet m4345 mfp its printing blank page

I got a hp laser jet 4345 mfp its printing blank pages

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to print envelopes hp laser jet pro mfp m225dw

Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw? Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

Hey @Shaggs,
I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
Loading Plain Paper and Envelopes
Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
What's my OS?
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face up' option.
8. Also ensure that 'Clockwise Rotation' is not selected.
9. Hit 'OK' and 'print'
Here is a video for additional instruction:
Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Laser Jet 1536dnf MFP

Why does my computer recognize my HP Laser Jet 1536dnf MFP as Universal Printing PLC6? And how can I install the HP Laser Jet 1536dnf MFP if it s not on any list, I don't have disc and is recognized as the wrong MF printer?

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laser Jet 1536dnf MFP says memory low and will not print

Laser Jet 1536dnf MFP says memory low and will not print. Have tried hard disconnect and restart. Error persists.

Hey , Welcome to the HP Support Forum. I hope you enjoy your experience here. I see that you're encountering the memory is low error status on your LaserJet Pro 1536dnf MFP. I would like to help. For this particular error, I have found the NVRAM Initialization type of reset to be beneficial in restoring functionality. Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here. As HP does not typically make the steps for this type of reset available publicly, I will private message you the instructions you need. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Hp laser jet m1005 mfp is in initializing state not coming to ready how can i solve it

hp laser jet m1005 mfp is in initializing state not coming to ready how can i solve it

Me too. I have this exact same problem. Can anyone help?

I have hp laser jet m1005 mfp can we scan document pdf format?

Dear Sirs,
I am useing hp laser jet m1005 mfp, can i scan and make PDF document insted of JPEG etc.
Kaushik
kaushik

Hello Kaushik9
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding an answer.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Laser Jet M1120 MFP

i m using HP Laser Jet M1120 MFP
can i use 10 metre USB cable to connect it with my PC as i dnt have much space near my PC.

Yes sir
I have did and so:
Driver - Product Installation Software (‏1)
HP LaserJet Hostbased Print/Scan Plug and Play Drivers 2013-03-28 , Version20080808, 12.89M
The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices. (More details)
download and starts installing it but do not completed as occured a letter " due to a probpem the installing will stop"

I'm trying to connect a LAN printer, HP Color Laser Jet 3800dn, through a Time Capsule but no one on the network can see it. The printer works fine if I connect it directly to my iMac. Any suggestions?

I'm trying to connect a LAN printer, HP Color Laser Jet 3800dn, through a Time Capsule but no one on the network can see it. The printer works fine if I connect it directly to my iMac. Any suggestions?

Hi Clark
There is a good chance the printer is just getting auto IP internally..
Plug it into your TC. And then set to dhcp via the controls on the printer.
If you know the name of the printer it should be immediately available to the network.. but anyway, you can find its IP by printing out the test page. That will also give you the network name.
Most later HP printers have web access to the print servers.. just type the ip into your browser and see if it comes up.
From the Mac, you should then be able to set it up via the printer preferences. Most HP will just appear.. but if not you should perhaps delete the local version and then check again for network printers.

I just bought a new external monitor (ASUS), and I have DVI adapter plug. When I connect it with my Macbook pro - the monitor remain black (even tho it is 'on')

I just bought a new external monitor (ASUS), and it have DVI and VGA plugs. I bought the DVI adapter to connect with my macbook pro laptop. But the external monitor remain black… so I turn it off then turn it back on, it said "No VGA signal". Does it means I have to use VGA adapter instead? I am not sure how it work, I am very new to it… I hope you can help me out!
Thanks!

Use the Transfer Purchases command in the File menu of iTunes.
(60931)

HT1688 Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also,

Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks

Well, did you activate this new phone?

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips?

I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))

In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Similar Messages

Maybe you are looking for