I just bought a MAC and am trying  to figure out the correct version

I just bought a MAC and am trying  to figure out the correct version of LR4 to install on the Mac.  Someone in support (LR) gave the link for the downloads, and I chose the LR4.4 (but, it said LR5---kind of confusing).  I don't have a DVD drive, so I am not sure if this one will work.  I have the LR icon that says Light Room 4.4 on the screen, but LR does not open when I click it.....????? How do I open this?  Thanks!!!

I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode).  However, they then tried to upsell me their own wireless router for $79.99......
Can I make this change myself or do they need to do it from their end?
Thanks!

Similar Messages

  • I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  when I try to donwload this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  When I try to download this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
    Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

  • I just bought a WRH54G and am trying to connect it to my...

    I just bought a WRH54G and am trying to connect it to my DSL modem which is a Siemens Speedstream 4200.  When I run the Linksys set-up disk, everything works ok until it tries to check my computer's settings then it fails, with the error message that it cannot recognize the router.
    Here is my setup:
    Siemens Speedstream to Linksys WRH54G to Computer via Port 2 and to PS3 via wireless.  All of the required 4 lights are solid on the router.
    I've called the Linksys help desk and we tried a number of things over 3 hours but the best we could get was wireless access for my PS3 but no access for the computer, which is directly connected via ethernet cable.  They suggested that I call my ISP to have them turn the modem to Bridge Mode but my ISP is unable to do so.
    Has anyone encountered this before or have any suggestions?
    Thanks!

    I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode).  However, they then tried to upsell me their own wireless router for $79.99......
    Can I make this change myself or do they need to do it from their end?
    Thanks!

  • Just bought a mac and would like to synch iPods etc. formerly synched on pc

    I just bought a Mac and would like to synch my ipods, ipads, iphones, etc.-  They were synched to our old PC-how do we do this

    As with all other important data that you will need or want to access on your new computer such as documents, photos, etc., you need to transfer your iTunes library from your old computer to your new computer as well. Transfer your iTunes library from your old computer to your new computer per the instructions included with this link.
    http://support.apple.com/kb/HT1751

  • I have just bought a mac and also have windows installed but how do i change from windows into mac?

    I have just bought a mac and need to know how to change from using windows into Mac. When the mac starts up windows come up but i want to use Mac?

    To set the default boot volume use the Startup Manager system preferences once you are booted back into the OSX.  Then you would only need the option key at boot time to boot into the "other" OS.

  • How do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    how do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
    ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. 

  • I just bought an iPad and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    I just bought an iPad2 and each time I click on the iTunes button it says "cannot connect to iTunes" I need help on this urgently

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Basic troubleshooting
    From Here
    http://www.apple.com/support/ipad/basics/

  • I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version.  I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

    I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version.  I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?  Will I need to go back even further?  Thanks

    Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9: 
    1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
    2 - if your MBP meets the requirements upgrade you system for free to Mavericks.  Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
    OT

  • I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

    I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane...  Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
    Thanks so much!!

    I don't recommend you send the iMac in a checked bag. Might get damaged.
    Check the airlines website for carry on guidelines.
    Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
    Just make sure the display is covered to protect it. A blanket perhaps.
    Aloha ...

  • Hi there everyone, I have purchased hundreds of movies and tv series over the last few years and can have not got enough space on my laptop so I have, put them all on to a WD 1 TB hard drive , I have just bought apple tv and am trying to stream my media f

    Hi there everyone I have had to store my iTunes library on an external WD 1tb hard drive,
    Problem is I've just bought apple tv and can't stream my iTunes library from my external hard drive, i have to keep copying what things I need to watch or listen to to iTunes and then stream it that way and it's very time consuming, please excuse my ignorance, but is there a way around this

    As per the question, really...
    "My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
    There's no error messages
    Only the films i've bought on my AppleTV appear on my AppleTV
    It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
    David

  • Just bought a Mac in Aug09 - how do I get the upgrade discount?

    I just bought a Mac mini in August. I bought it through the Apple online store in Singapore. I think I'm entiled to buy the Snow Leopard upgrade for US$9.99 but I don't see where I can do this. I have seen a web page for US residents, but not for overseas residents. does the discount only apply to US buyers?

    http://www.apple.com/macosx/uptodate/
    As far as i know it is just US and Canada. However i know if you are serving in the military overseas Apple has some sort of solution.

  • Just bought i pad and it will not go through the set up process

    I have just purchased an ipad and it will not go through the set up process. Anyone else had this problem ?

    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Just bought a mac and trying to connect to printer? help!

    Hi i just bought a macbook pro, and i am trying to connect my macbook to a printer
    it is a Brother DCP-135C printer
    im lost as to what to do, i have tried everything :/
    thanks

    If you connect the printer via USB and got it to print anything, you know it is basically working.
    If you want to print via WiFi, you need to tell the printer what IP Address to use, and what the WiFi password is so that it can talk on your Network.
    On some printers, you can configure this over the USB connection in advance. On others, you have to use your fingers on its Control Panel (on the front of the Printer chassis).
    If you have a WiFi Network that uses 10.11.12.1 as the Router address, a good place to assign for the Printer is above the addresses normally given to computers, but below .254. .200 is usually a good choice if you have not already assigned it. For a 192.168.0.1 Network, 192.168.0.200 is usually available.
    Then you have to tell it the network password, so that it can talk on the Network.
    Then you should launch Network Utility and try to send it two or more Ping's and see that it answers.
    You may find this article helpful:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Once it answers, Use Add-a-Printer, but do not use the default Browser. Use IP Browser, and specify its IP address. You also need to know whether it will use Internet Printing Protocol, LinePrinterDaemon (LPD), or hp JetDirect Socket (which is used by more than just hp printers). This information should be in your manual.
    If it sees the Printer at the Address you specified, it will make sure the correct Driver is in place for you.

  • I just bought a mac and have never used one.  I need help.

    i have no idea what i am doing.  I have always used a pc.  now i have a mac mini.

    Stedman1 has posted a great link. I strongly recommend against the Mac for Dummies. At some point the Dummy books began to believe they were for dummies rather than for newbies. The Missing Manual series is very good. If you were a comfortable Windows users the book I recommend is Switching to the Mac: The Missing Manual, Mavericks Edition because it will build on what you already know and understand. Otherwise just get the OS X Mavericks: The Missing Manual version.

  • I own a PC version of Photoshop CS6.  Just bought a Mac and want to use it... what can I do

    I am now a mac user but still have my registered PC version of Photoshop CS6.  Can I pay to change it over and how do I do this ?  I am willing to spend the $10 per month too.  I was able to install my lightroom on the mac with the registration number but not ohotoshop

    Lightroom serial numbers are multi-platform: they work on both Mac and Windows.
    Photoshop serial numbers are platform specific: Mac only or Windows only.
    Obtain a Mac serial number using this process (available for CS6 only, not earlier versions)
    Order product | Platform, language swap
    Then obtain the CS6 Mac installer from Download CS6 products
    Install then enter your new Mac serial number when prompted.

Maybe you are looking for