I just bought a new nano but now it won't fit the attachment in my car or speakers, is there an adapter?
I just bought a new nano but all my attachments are for my old nano and don't fit - is there an adapter?
Hello amkassam,
Congratulations on your new iPod nano! There is a Lightening to 30-pin Adapter that you can purchase to allow your previous accessories to work with your new iPod nano:
Lightning to 30-pin Adapter
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
Best,
Sheila M.
Similar Messages
-
How do I restore my Ipad 4 from my desktop computer? My charger was damaged so I bought a new one but it won't charge. On my Ipad, I have a BATTERY bar in the middle that is flashing RED and an icon on the bottom that looks like the end of a charger. I have tried to force into reset mode, by holding the sleep key and home button SEVERAL times but it does NOT work. I have plugged my Ipad into my desktop computer, but I do not have a screen on my desktop that is coming up. THIS HAPPENED BEFORE AFTER I DID AN UPDATE AND WAS LOCKED OUT AND I USED EITHER ICLOUD OR ITUNES TO RESTORE, NOT SURE WHICH AND I FORGOT HOW.
Hi MrsMoosie,
I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or doesn't appear to be charging, you may find the information and troubleshooting steps outlined in the following articles helpful, in particular the following portion:
If you don't see the charging screen within an hour, or you see the connect to power screen, check your connector, USB cable, and power adapter. Make sure that everything is plugged in firmly, free of debris, and not damaged. You might want to try a different USB cable or power adapter.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
Have just bought an Ipad retina 16gb and wish I had got the 32gb as once I put 3 or 4 films on to it I have no memory left. Any suggestions to increase memory or do I have to put up with it or bite the bullet and buy a 32 gb and try and sell the 16 gb.
If it has not been damaged, you have had it less than 14 days, and you purchased it from Apple, you shold be able to.
-
My laptop died I bought a new one but, now I want to get the songs in my ip
I need to synch my ipod to my laptop but, the songs are in my ipod not my laptop. How do I synch the ipod using it as the master to download what is in it to the computer ????
If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer. -
I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??
Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables. -
I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?
Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
I just bought a new Nano. How do I tranfer the songs from my Shuffle to my husband so he can open an itunes account of his own?
DaisyDoodle,
The songs on your Shuffle should still be in your iTunes library. That means you should just be able to connect your Nano to the same iTunes library and sync it just as you would with your Shuffle. There is no limit to the number of iPods, iPads, or iPhones you can sync to one computer, iTunes library, or account.
As for preparing the Shuffle for your husband, just restore it via iTunes and then let him sync it to his own iTunes library or if its the same iTunes library, let him configure it to sync only his content.
Here are instructions on how to restore the Shuffle if need be.
http://support.apple.com/kb/ht1481
B-rock -
I just bought a new iPod and I have it set up the same as my old iPod but I can't get notifications on the lock screen like I did on my old iPod. What can I do to fix this?
Hi.
What is the exact notification you are waiting? This could be possible that the device has already been opened once. Don't you think? -
Just bought a new nano and it doesn't have Mickey Mouse clock. Can I download it?
Just bought a new nano and it doesn't have Mickey Mouse clock. Can I download it?
Update it in iTunes. Then you will see that you have the clock faces you are looking for.
i -
I just bought a new Nano. it says I need to uninstall and reinstall iTunes. If I uninstall iTunes will it wipe out all of the music I have already downloaded on my computer?
No. Back it up anyway.
(73635) -
my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help
Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181) -
I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?
If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2 -
i had lost my old I phone 4s and bought a new one but now i found my old one and its been so long i cant remember the pass code to unlock it what do i do
http://support.apple.com/kb/HT1212
-
Just bought a new 5s but when i take a picture it doesn't appear in the camera roll
Just bought a new 5s but when i take a picture it doesn't appear in the camera roll
Is your camera restricted? Check Settings > General > Restrictions
-
I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge
I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger,
that sometimes is blank, but it does charge my computer.
Anything I can try?
I have updated to 10.9.2
Message was edited by: wplewisBring it back to the Apple store with your MBP and charger. If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
Ciao.
Maybe you are looking for
-
In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And
-
I need to control the position and size of each java swing component, help!
I setup a GUI which include 2 panels, each includes some components, I want to setup the size and position of these components, I use setBonus or setSize, but doesn't work at all. please help me to fix it. thanks import java.awt.Dimension; import jav
-
Running In Background on Server
I am with a Sender and Receiver application where the Receiver runs on a Server and the Sender runs on the Client. What I would like to do is have the Receiver run on the server and continue to set and run waiting for files to be transmitted. I attem
-
Hi Experts, I have created a transaction iview (SAP GUI for HTML). When I click on preview it was opened in a separate window with buttons Menu, Save, Back, Execute etc.. If I click on button u2018Backu2019 it was going to SAP Easy Access screen. I w
-
Two Instance getting triggered on Change of PO for BUS2012
Hello experts, I have created a single step Workflow, to be triggered on change of PO. I created a Subtype of BUS2012 and delegated it. added a new method to carry out the processing as required. However on change there are two workflow instance in t