I just bought a new printer the B210 and I have a 2wire router. I am getting a no filtering issue
the notes on the test page is stating the printer is finding two of the same SSIDs. I tried changing my SSID, changing the channel and etc and still getting the error.
Any suggestions?
Make sure your SSID is unique (and make sure that you click Apply after you change it so it acctually take effect).
Also, try this:
- Unplug the Internet line that runs between the router and the wall
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the router.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know, use the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the self-test printout) for the gateway and first DNS.
- Leave the second one blank.
- Click 'Apply'.
- Finally, plug in the Internet line, reboot the router and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
I just bought a new external monitor (ASUS), and it have DVI and VGA plugs. I bought the DVI adapter to connect with my macbook pro laptop. But the external monitor remain black… so I turn it off then turn it back on, it said "No VGA signal". Does it means I have to use VGA adapter instead? I am not sure how it work, I am very new to it… I hope you can help me out!
Thanks!Use the Transfer Purchases command in the File menu of iTunes.
(60931) -
I just bought a new 2TB time capsule and I am so frustrated that I cant get any help!!!!!
Yesterday, I bought a new (4th gen) 2TB TC to replace by mid 2007 500gb TC. I did this simple to upgrade the wirelass capability to the very latest as the wifi in our home is intermittent. I also bought a Zepplin recently so that i could use Airplay to stream music but the wifi is also intermittent, it works when it wants to and not usually when when i want it too!! Hence the purchase of a new TC for £249.
The instructions on the Apple site and in the instruction book all say it is so easy to set up the TC and the wireless network.
So here I am , 24 hours later and frustrated at having spent hours and hours and gotten no-where. Ive logged calls with Apple Support and even though I am sat by the phone they keep emailing me saying they've tried to reach me and if I still need help then to rearrange a call!! But I'm here!!!
Here's my problem (apart from the desire to take the TC back and get a refund)...
- when I open Airport Utility (6.2), I get a picture that shows the world and the word Internet with a line to the time capsule but all the instructions that I have found and read say that I should get a dialogue box that lists the devices on the left hand side. The instructions with the TC say I open AU and follow the instructions and prompts - what instructions and prompts, there arnt any!!!
- also, the picture does NOT pick up the 2 airport expressess in the house that I used to extend the wirelass network on the previous TC
- there is no option to extend the wireless network
- every now and then the TC light goes Yellow and airport utility "looses" the TC
- TC seems to want to back up the entire MAC (c350gb) but it is doing so at a very slow speed and only did about 2.5gb over night. I dont mind a whole new backup to the new TC but it cant be right that it will take 19 days (the last time I looked!)
My main frustration is that the so-called simple instructions dont seem to replate at all to my system and I'm frustrated because I dont know where to go to get any help....and if Apple email me one more time to say they cant reach me then I will definately take the TC back!!
Can anyone help me?
p.s. sorry for the rant, i though this would be a half hour job to upgrade my wirelass and is turning into a nightmare!Unfrotunately, this sounds like a dead TC.
- also, the picture does NOT pick up the 2 airport expressess in the house that I used to extend the wirelass network on the previous TC
- there is no option to extend the wireless network
You need to reconfigure the Expresses to rejoin the TC's network via a factory reset. -
I understand the macbook has a tool for transferring and wonder is that the best option or will the above slow the computer down and therefore be a better option to have it on a external harddrive.
Sorry new to MacDon't use the migration tool, transfer manually via the external drive.
However you need to format it correctly for Mac/PC use
Drives, partitions, formatting w/Mac's + PC's -
Just bought a new printer and download the software
Hi,
I just bought a new printer and I need to be able to print all of my homework assignments off but i tried to come to the website on several occassions, the site is always down. So what do I need to do next? Do I call someone about the problem or do I just take the printer back and buy another one from another company. And I do not have a CD drive for my small laptop.Hi,
What is your printer and the Operating system of your small laptop ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
-
I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html -
I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
Any advice welcome.To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
You may dinf soem of the articles here useful:
http://www.apple.com/support/ipad/syncing/ -
I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexion. When I am entering my password for the connexion the software crashes. How can I fix the problem?
Migrating, transferring or copying is DEMANDING trouble, not just asking for it.
Always install from scratch, from the original media, -
I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?
I have to ask,
Are you making sure you are in park before attempting the sync? The car won't allow you to do it in motion, whether or not you're the passenger. -
hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me
Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.
-
I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?
Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
Connect both computers to your local network and then share the optical drive to install the software. -
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?
I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm -
I just bought a 2012 with the i5 and 4 gb RAM
I just bought a 2012 with the i5 and 4 gb RAM. Something is NOT right. Right along side it -for comparison purposes is my macbookpro -2009 -dula core with the stock 4gb ram.
The OS is the same -latest Mtn Lion
The mac mini is on its knees. With ZERO programs open the RAM available is just 1,100 mb -with about 6 firefox windows open the sbbod happened ALL the time and the available memory is around 300 mb.
The mac book pro -with inferior specs -right ? - has the SAME windows etc etc and has 1,900 MB OF AVIALBLE RAM - HOWVER NO SBBOD!!!!
The Mini Mac is way to slow...but why? I just bought it 2 days ago - very dissapointed so far.
Yes, I know installing 16gb of ram will (may) fix it - but the out of the box expreince is jusy messed up!
Ideas? Thoughts? Same issue?Hi Johnfromoro,
I'm having the exact same issue as you, my old iMac 2006 seemed more fluent and less laggy/jerky then my new 2.6 GHZ quad core i7 mac mini. If I open a app I get the randbow wheel (yeh nothing else is open) I mean come on a quad core i7 can't open one application fluently?
I too have experience very high swap files also at a 1GB - this seems very odd considering I had 1.5 GB unused ram left? The applications that ran on my old iMac seemed to work alot smoother, I was expecting with the stats that Apple launched and I read about, that this would eat my old iMac for breakfast but I'm sitting here thinking. "Is this it??" It just lacking the whole sales pitch I was given about 78 % faster here and there!
Please could you let me know what Apple say about this cause I'm wondering if I too have a faulty machine or is this the "power" the mac mini offers?
P.S. I ran the disk ultility repair (no improvement), also I time machined all the files/data from my iMac to the new mac mini.
Kind Regards
Maybe you are looking for
-
Error -17501 flxCVIadp.dll when starting CVI full featured user interface on Windows 7
We see the following error dialog when we launch the CVI full-featured user interface (TestExec.exe): "Error: Unable to load test environment adapter 'flxCVIadp.dll'. Run setup to re-install or remove this adapter. Could not connect to TSAutoMgr.exe
-
How you guys doing ? can you please do the conversion for me to version 2009 ? Thank you guys Bill David Solved! Go to Solution. Attachments: Read raw data mod_HR_detrend_denoise(5).vi 98 KB
-
Resolve Relative URLs in Http response.
I am using java.net package classes to make Http calls to get HTML, which I display in a page (using JSP). Problem is that there are relative paths in anchor, images etc and so links don't work and images don't display. I would like to know if there
-
About the top end of Metadata panel
I want to know that the different Icons on the "Dashboard" or whatever we call the top end of Metadata panel. The smallish white rectangle with a good bit of info inside and next to it a grey rectangle with more details. (See inlined image below) I s
-
How do I eliminate the automatic pop-up created when using the Rectangle Tool?
For some odd reason, Acrobat 9 is now adding a pop-up every time I use the Rectangle Tool. I am using the Rectangle Tool merely to draw a box around text but I do NOT want there to be an associated pop-up. Is there a way to change it so the pop-up