I just bought a time capsule and it will not connect to preexisting home WiFi.
I just bought a time capsule and it will not connect to preexisting home WiFi. The Airport Utility recognizes one of my neighbors networks but not mine. I have ATT&T U-verse. I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network
tallswag wrote:
I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important.
As long as you have two apple routers then it is up to you which way you do it.
You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.
Similar Messages
-
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
I bought a wifi ipad2 recently and I can't get passed the set up screen. It will not let me connect to my wifi initially? I have the correct password. someone please help!!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes
Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ... -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I just got a iphone 5 and it wont automatically connect to my home wifi?
i just got a iphone 5 and it wont automatically connect to my home wifi?
Hello Andy,
Congratulations on your new iPhone 5! It sounds like it is not automatically connecting to you home Wi-Fi network. I recommend following the steps under the section titled "Unable to automatically connect to Wi-Fi" in the following article for this specific issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My 4s will not connect to my home wifi anymore my iPad and macbook pro do any solutions
Hello
My 4s will not connect to my home wifi anymore my ipad and macbook pro do any soutions ;-)
Thank youthat doesnt mean anything. they call connect separatly to your router. your need to try reseting your router and updating its firm ware. You phone connects to wifi just fine just not yours and that is the problem
-
My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.
Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D. -
My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?
Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
Good luck and do report back. -
I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.
What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections -
Time capsule and router will not work
I have a time capsule and needed to take it into the Apple store. Upon setting up again I can not get access the internet. the computers recognize the network but will not connect to the internet.
You have described the problem.. but we have no idea of the setup which you have..
So please tell us.
What modem you have? Make and model?
What router is working as the main network router?
How is the TC connected into the network?
Please post a screenshot of the current setup of the TC from airport utility as that tell us more than anything. -
I just received my IPad and it will not sync with ITunes and my Mac doesn't recognize it any form. The screen is black with the exception of the annoying ITunes/USB cable graphic on the screen which appears momentarily and then disappears. Any ideas?
Things you can try first off,
is make sure you plug in your USB at the back of the mac, rather than for example keyboard.
Check out another usb cable.
Hold down sleep/wake and home button at the same time to reset iPad.
Make sure you have the latest iTunes installed or you may have to reinstall iTunes.
None of these work then I suggest you to take it to an Apple retail store for the genius guy to check it out. -
The enclosed booklet suggests that the time capsule is suposed to be between the DSL modem and a printer, connected by an ethernet cable. Ive tried that and the amber light just keeps flashing.
Ring apple they will normally be able to talk you through it.
The TC connection to printer is optional..
Normally you plug into an existing router with the TC in bridge mode..
Tell us what OS you run and we can point out how to do that. -
can i use both at the same time?
Replacing your router is like a heart transplant for your network. Everything changes.
Power down your modem, disconnect your Extreme, and connect the new Time Capsule. Power up the modem and then the TC.
AirPort Utility will lead you through its setup.
You may need to reconfigure your wireless printers and anything else that was a client of the Extreme.
You may use both at the same time, but only one device should function as your router. Decide which one that will be - it doesn't really matter which, assuming they are both recently produced units. The Extreme can be used to "extend" the TC's wireless network, or the other way around.
Maybe you are looking for
-
I tried to download two movies on Christmas and I cannot find them in my movie section on Itunes
-
Urgnt help in import user schema
Dear all, when i make import from user schema , i faced the problem of __arabic__ data corrupted ( ????????????) this warning is appeared in the log file of import can any one help me to solve this problem . import done in AR8MSWIN1256 character set
-
Use of requirements in access sequence
please explain with example what is the use of requirement while creating an access sequence.
-
Buen día, como doy de baja un iPhone de mi cuenta?
Buen día, como puedo dar de baja un iPhone de mi cuenta?
-
I need to reset my security questions, because I don't remember the answers, but the "forgot your answers? Send reset security info email" is not showing when I log in. How can I proceed? Thanks.