I Just bought a used 6th gen nano. But when I plug it into my usb it says " an ipod had be detected but cannot be identified properly". I registered it also. What am I doing wrong?
I Just bought a used 6th gen nano and when I plug it into the usb it says on my itunes page "an ipod has been detected but cannot be identified properly". I have already registered it. What am I doing wrong? Is it a faulty one?
The following document might be worth a try with that:
iPod nano: Error message saying that iPod 'could not be identified properly'
Similar Messages
-
I can't get my new 7th gen nano to sync to my exsisting itunes. It keeps saying the ipod is not detected.
If youre like me, I have so many Apple devices, I always move things over manually rather than remember what to sync and what not to sync........ There’s an option to UNCHECK sync on any device if that helps you in ITUNES.
On any device, like your phone, in ITUNES you can check the option for manual vs. automatically sync. -
I have been on the Apple Support page for several hours now and cannot find my exact circumstance and other suggestions have yet to help me. I purchased a locked ipod touch and when I plug it into my laptop itunes says "Itunes could not connect to ipod because it is locked with a passcode". The guy I bought it from told me the password but I failed to write it down and remember it and he has since moved so I can't find him. I have tried putting it in DFU mode and I can get it there, but then Itunes does not show the pop-up that everyone has said will come up with the alert about an ipod trying to restore itself so I cannot get it to do so. Any suggestions would be greatly appreciated!
Thanks,
AMWhen in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
I just bought a philips fidelio docking speaker and when I plug my iPod touch 4th gen it charges but dosent play music through the speaker.
Does Phillips say it will work with a 4G iPod with 6.1.5?
Have you went to their support site?
Which dock did you get?
This one
http://www.usa.philips.com/c-p/DS8500_37/-/specifications
says only compatilbe with the 1G, 2G and 5G iPod tpouchs (as well as some other iOS devices) -
My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.
Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling -
I have downloaded and installed Adobe Flash Player, but it was installed to a "disk image". I don't know what that is, but I cannot view anything that requires flash player. What am I doing wrong?
Thanks for your help, but that didn't do any good either. I have been double clicking from the download files, double clicking on the "install adobe flash player", closing the anti virus, closing Safari, watching the install progress and clicking finish. It indicates that "flash player" is installed, but every time I try to view something requiring flash player, it tells me I must download it. It shows up in the "system preference" and from there I can make some changes, but it still won't let me view anything requiring "flash player". It does not show up in my apps like Adobe Reader does. It shows up in the "downloaded files" section of "Finder". I'm getting really perplexed over my inability to get this right.
-
I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete. I can open every file I try except Quicken and Turbotax. What am I doing wrong?
burgessiii22 wrote:
Thanks for the answer Linc, but how do I check to make sure the back-up process is working if I don't think I need to restore?
Create a test file with Text Edit (or any other program) and save it to your desktop.
Run Time Machine from the menu bar.
When the Time Machine icon in the menu bar stops spinning, drag your test file to the trash.
Open Time Machine and go back 1 page. You should see your test file on the desktop. -
I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work. -
I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?
If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If not, you can't use the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(119278) -
I just updated my phone to the latest version.... but when restarting it asked for a passcode. I haven't had a passcode in at least six months and don't remember what my old one was. What can I do to access my phone?
Never mind was thinking a different brand
You used a backup on iTunes? -
Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine. please help.
Have you restarted your computer? iTunes updated?
-
what do i do when i try to open my ipod nano in itunes and it says "an ipod has been detected, but could not ne identified properly"
Hello rachel167,
I would use this:
iPod nano: Error message saying that iPod 'could not be identified ...
Ensure you use every step.
Hope this helps.
~Julian -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
my iphone 3gs is in dfu mode, but when i plug it into my laptop to restore it, my phone won't show up in itunes at all. what do i do???? please help, it would be very much appreciated
Follow the steps here VERY CAREFULLY: http://support.apple.com/kb/HT1808
-
when i turn my iphone 4 on, it comes up with a picture of a cord connecting to an itunes icon. when i plug it into my pc, it says the settings on my iphone need to be restored. but i dont want to restore it as will lose everything on it. what shall i do?
You have no chose but to restore your phone. What do you mean "lose everything"? Is your data/iTunes content not on your computer?
Maybe you are looking for
-
Open Pages 3 documents with Pages 5?
I'm thinking of updating from Pages 3.x to 5.x. Is it true one cannot open Pages 3 files with Pages 5? If so, what is the workaround?
-
How to capture the data entered in a textfield in a JTable
How to capture the data entered in a textfield present in a cell of a textfield or how to add listener to this textfield
-
I have installed netbeans and ttf-linux-monaco from repo. Looks strange, but there is no Monaco in list of fonts in netbeans. How to set Monaco as main font in Netbeans? Manual setting from config file is useless.
-
ADF Iterator bindings in the page
Hi, I am having the two selectone choice boxes in the same page which are binded to different iterator instances(iterators are binded same View Object). I want show different data list based on parameter from particular selectone choice box. But when
-
Place SR and Opportunity records in one report
Hi Exerpts, Are we able to place SR and Opportunity information on the same report? Thanks, Sabrina