I just bought a white iphone 4s, i noticed that the glass doesnt align with the speaker its a little off, anyone else having this problem?
I just bought a white iphone 4s, i noticed that the glass doesnt align with the speaker its a little off, anyone else having this problem?
It should work fine with Version 1.2 and Itunes 7.0 or later.
Check the battery charge--- Make sure it’s OK
No need to keep running the battery down..?
Do a manual Reset on IPOD--by selecting
Menu and Center simultaneously, for about 6 seconds.
You may have to do this several times.
re-try IPOD
Make sure your Windows software is up-to-date.
Make sure your running the correct software version for your IPOD.
If this doesn’t’ work---
Do the 5 R’s as instructed in the Apples manual.
Compaq PC 6370US / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD
Similar Messages
-
I installed the new Apple TV update and now I can't access photo stream. It tells me to accept the new Terms of Service BUT they never load on my iPad, iPhone or PC.
See:
https://discussions.apple.com/thread/4350553?start=15&tstart=0
Solution: downgrade to version: 5.0.2 -
App Store keeps saying cannot commect to itunes then my app completely disappears
There are a number of posts from other people with the same problem with accessing the store : http://www.apple.com/support/systemstatus/
You could occasionally check that page to see when the store''s back up. -
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
hi i just bought a mac pro but i notice that it didn't come with a recovery disk.where can i find the recovery disk?
https://support.apple.com/kb/HT4718
Reset your Mac
Most commonly used backup methods -
My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.
I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.
-
Whenever I ask Siri to send a message to a contact, it will attempt to send it as an iMessage. This is a problem because it will attempt to send iMessages to contacts of mine which aren't even iPhone numbers. Is anyone else having this problem?
So, this is a problem because when Siri attempts to send iMessages to those without iPhones it, of course, fails.
For example, if I say to Siri, "Tell my mother 'Hello.'" It will try to send an iMessage. My mother has an Android phone, so the iMessage just gets lost in cyberspace.
I use Siri quite often, this problem only occured about two hours ago.
Can anyone help me with this?
Thanks.
ThomasI had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
We have 3 iPhone 6's in house. It takes 30 minutes most days to receive text messages. We have to reboot phones to get them to work but it's a temporary fix. Is anyone else having this problem?
Oh no! Lets get all of these devices to work as it should. Did this issue just start? What is your zip code? How does it work in other areas? Share further details so that I can assist! Thank you, LenaA_VZW Follow us on Twitter @VZWSupport
-
I have a new but 2010 model. It operates very slow and has gray screen occassionaly. One store said it's "safe sleep", the other graphic board. Is anyone else having this problem with computer only 4 mos. old?
Your problems may be caused by software or hardware, including the gray screen and the slowness. The intermittent gray screen is a puzzler and probably is hardware. TUSL2C’s diagnosis may be right on the money. A question is how to isolate it to HW or SW that so you can get good service?
The obvious cheap and easy fix is to replace that cable but I don’t think you can do that because it is under warranty. There are other ways to isolate the problem that won’t void the warranty.
If the disk turns out to be healthy and it continues to boot to a gray screen then that will be a sign that internal hardware, other than the disk, is to blame. Since they are blaming it on software we will be able to test it with a pristine OS X installation that has no 3rd-party software to blame.
> They are calling it "Safe Sleep Mode" and that happens if I don't use the machine within 4 hours.
The machine should go to sleep and wake up almost instantly every time without a gray screen. If you can demonstrate the problem reliably by putting it to sleep and waking it up then that will be most useful. We will show it failing on pristine OS X software without 3rd-party mods to prove it is an Apple problem. Similarly if you can reliably show the gray screen from a power-on boot that will help.
My first question is do you have a current Time Machine (or other) backup? If not you should create one before we get to steps that could stress the disk. If it is a faulty cable or a faulty disk then the system could stop functioning at any time. It is always prudent to maintain a current backup and especially important when the system is sick. If you do not have a Time Machine (or other) backup then post back for instructions on how to create one.
In the mean time please download and run Etrecheck and post back the results.
http://www.etresoft.com/etrecheck
This will indicate possible software compatibles and other details that may be helpful in a diagnosis.
Also run disk diagnostics with Disk Utility. This will check if the disk and filesystem are healthy.
From the Finder, pull down on the Go menu to Utilities. This will open the Applications > Utilities folder.
Then run Disk Utility.
Click on the upper left disk icon.
Does the S.M.A.R.T. status say “Verified”.
If not the disk/SSD is unhealthy and needs to be replaced.
Click on the icon indented below, usually called “Macintosh HD”.
Verify Disk.
If it finishes with a green “OK” message then all is well with the disk.
If it shows errors in red then you may have found a problem.
Click on Repair Disk Permissions.
It will give lots of messages in black and white, which are OK.
If it gives any messages in red then there is an issue to address.
It will be useful to have some test that shows the slow speed that uses standard OS X applications such as Pages, Numbers, Presenter, iTunes, iMovie... or even just the Finder opening windows or starting applications. We can then use that test when isolating the source of the slowness.
How many seconds does it take to boot from power-on to either the login screen or the Finder is up? Please time that. It is a good speed test. If it is over a minute then something is wrong.
One way to isolate the issues will be to sandbox it using another disk to test what happens with different software on different hardware disks in different locations. That will not void the warranty.
But before going there or proceeding further let’s look at the Etrecheck and Disk Utility results, ensure the system is backed up, and then try some other standard tests. -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Password is not working but JUST for app purchase permission. Anyone else having this problem?
Anyone else having this problem? I keep entering my password and instead of telling me i've entered the wrong password, it just prompts me again. Password is working elsewhere (obviously - I got onto this forum) and I have tried rebooting the phone. Thoughts?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?
I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup. -
I just installed Adobe InDesign CC 2014 and now I can't scale objects/type using Command+Shift Key. Has anyone else had this problem and if so, any solution?
There is a conflict with third party software or your system keyboard shortcuts. Lately, there have been many postings about conflicts with Chrome extensions so check there first.
It's not a new problem. I wrote about it on InDesignSecrets.com in 2006:
The Missing Keystrokes Mystery | InDesignSecrets -
After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help
I am having the same issue. I am updating to 6.1.3 to see if that helps. It is really annoying. It seems to vibrate as well as hiss on my ear piece speaker while on a call. I keep looking at the phone thinking maybe another call is coming in.
Maybe you are looking for
-
How do I permanently erase my entire MacBook Pro 2011?
I am giving my Mac to somebody and don't want any recoverable traces of me to be on my computer. It's a MacBook Pro 2011 13" but it has Yosemite 10.10.1
-
Hi experts I inserted a customer field in shopping cart item structure INCL_EEW_PD_ITEM_CSF_SC and now I am able to see it in shopping cart creation, the problem is when insert some information in this customer field it is imediately cleared, and I c
-
Can we call an Standard API from the BPM process
Hi, Can we call a Public API from within a BPM Process. Can you please suggest the procedure for achieving the same. Also wanted to know the procedure to insert into Standard Interface tables and called Standard Interface program to Create objects li
-
Hello, I have recently bought an iPhone, and after reading the User Guide I have many small basic questions. I'm using an iPhone 3GS together with Windows Vista. I wouldn't like to clog this forum with multiple topics about small things, hence everyt
-
Which fields in PDF DOM are changed after executing a JS. Any way to know that?
while executing a javascript, doest Adobe provides any eventing mechanism indicating what are the fields that have changed?