I just bought Titanium HD PCI-e and don't hear any sound from analog outputs

To get my soundcard working i have to switch manualy from Game Mode to Entertainment Mode or Audio Creation Mode, sometimes i have to do this more than 20 times.
I have tryed many drivers ( PAX too ) nothing solved my problems.
I'm working in a computer service, tested my card on two another configurations. In first computer there was no problem at all. In second card was not recognized as a device in pci-e x1 which was above graphic card, but i had to put it in pci-e x16 and to use on-board graphic.
Is there any sollution for my problem ? Maybe someone had similiar problem.
My comp spec: Asus P8Z68-V Pro, cpu I7, 12GB RAM, Asus GTX 580, ( on-board sound card turned off in bios )
Small update:
I can force my sound card to play, by updating drivers in device manager ( ofcourse without restart ), No matter what drivers i choose it will work...till i restart my computer.
After restart silent comes again ( changing modes make sometimes my card to work).
Sometimes while changing modes i hear some sound for half second, then silent again.
My system is reainstalled few times, fresh windows, chipset drivers only and creative drivers.
Its really annoying.
Took from work few other motherboards, gona check if it is problem with asus mb only.
Sorry for my poor english.

I had thought that it may have been your GTX580. Everytime I update video drivers (have 5870 crossfire and another case with 560ti sli) all of these sound devices show up. Like seven of them. I have to disable them all in device manager each time. Then other ones show up under "recording devices" and I have to disable these. Tedious.
You could check if the front panel audio on the case has bad jacks by putting two cases side by side and installing the front audio panel connectors from the second case into the sound card and seeing if it works or not. If the front panel audio on the second case works like a charm then you could install either a 5.25 or 3.5 bay front panel audio device into one of your front bays. This may be the easiest solution if the problem is case front panel audio.
But with Creative products who knows what makes things tick?
Are you using an HD Audio (Azalia) or an AC'97 front panel connector? It may not like an AC'97 Front Panel Connector.

Similar Messages

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

Hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

Hey ErikSimon, I kept troubleshooting my problem last night and when I loaded my samples an alternate way, actually the longer way, it worked. I think I have gremlins in the system or something, but I got it working again. I was having the issue when I tried loading the samples via these instructions that were mentioned in SFLogicninja's Youtube video @ 3:07
http://www.youtube.com/user/SFLogicNinja#p/u/8/7YjgKLZ2jpY
They are good instructions, but the Logic gods weren't smiling on me last night. Really weird and frustrating at the same time. Thanks anyways.

HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

I cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.

Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
If this does not help, try to set it up as new device, explained here:
How to back up your data and set up as a new device

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

Just bought android phone (LG G2) and I do not receive SMS from iphones . Problem with iMessage but I do not have my iPhone to deactivate. Any ideas how to handle?

Just bought android phone (LG G2) and sold my iphone 5. I cannot received sms from iphones. Obviously issue with iMessage but since I do not have the iphone anymore ...not possible to deactivate... any ideas how to handle?

Read here under no longer have device:
http://support.apple.com/kb/ht5661
You can also call AppleCare to fix this.

I can't hear any sound from my earpiece for incoming and outgoing calls or music playing for 5s

hi can anyone help me?, i have an iphone 5c about 2months old and randomly today i tried to play music but there was no sound. When recieve calls it rings i pick up and its quiet no sound nothing same thing when i dial a number

Hello channyk,
It sounds like you are unable to hear from your receiver on the phone and from the speaker as well. I would use the troubleshooting from the following article:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

I just bought a new macbook pro and after doing the data migration from my time machine I cannot get pages to work

the error message said to check with the developer to make sure that pages works with this version of iOS

"the error message said to check with the developer to make sure that pages works with this version of iOS"
IOU is operating system for iPhone, iPad not MBP. Is Pages the only issue you are having? What version of Pages are you using? Post in the Pages forum where those experts are.

I bought a usb microphone (blue snowball). I can't hear any sound from it. The MIDI master volume is turned all the way down, and I can't turn it up because it's frozen/locked. Please help!!! Not very tech savvy, been at this for hours and desperate :(

I've been trying to fix this problem, seems like it would be simple, but apparently it is not. I just want to turn up the master volume control under my input tab in MIDI audio devices so I can use my blueball microphone.
This image above is what I'm currently dealing with. I put a red box around the volume control I want to use. That is the one I can't turn up because it is locked/frozen.
Please make steps as simple as possible!
Thanks

You should have gotten a user manual. If the manual is of no help, contact the manufacturer.

I am using the weather channel app and don't have any sound. The sound button is at a Hugh level. Can anyone help?

Ipad2 no sound with weather channel app. Settings indicate sound level is up. Can anyone help? Thanks

You havn't got notifications muted have you ? Depending on what you've got Settings > General > Use Side Switch To set to notifications can be muted either by the switch on the right-hand side of the iPad or via the taskbar (whatever the switch is set to control, the other function is controlled via the left end of the taskbar). More info here http://support.apple.com/kb/HT4085

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

I just bought a new Nano. How do I transfer the songs from my Shuffle to the Nano and then give the Shuffle to my husband so he can open an itunes account of his own?

I just bought a new Nano. How do I tranfer the songs from my Shuffle to my husband so he can open an itunes account of his own?

DaisyDoodle,
The songs on your Shuffle should still be in your iTunes library. That means you should just be able to connect your Nano to the same iTunes library and sync it just as you would with your Shuffle. There is no limit to the number of iPods, iPads, or iPhones you can sync to one computer, iTunes library, or account.
As for preparing the Shuffle for your husband, just restore it via iTunes and then let him sync it to his own iTunes library or if its the same iTunes library, let him configure it to sync only his content.
Here are instructions on how to restore the Shuffle if need be.
http://support.apple.com/kb/ht1481
B-rock

I HAVE JUST BOUGHT AN I PHONE 4S AND SUCCESSFULLY JOINED I CLOUD, ALSO ON MY PC. BUT I HAVE USED A DIFFERENT SIGN IN E MAIL ADDRESS THAN ON MY ORIGINAL I PAD. HOW CAN I CHANGE THAT TO THE NEW E MAIL SIGN IN ?

I have just bought an i phone 4s and successfully joined i cloud, i have also successfully linked up my pc with i cloud. However my i pad is a little older, and when i signed on to i cloud some time ago i used a different e mail 'sign in' address. How do I change this in order to link all three devices. Thanks in anticipation, David.

Go to Settings>iCloud, tap Delete Account and provide the password (if using iOS 7), then sign back in with the ID ("email sign in") you want to use.

I just bought Titanium HD PCI-e and don't hear any sound from analog outputs

Similar Messages

Maybe you are looking for