I just connected to apple express and now my printer (hp office jet j5780) doesn't print.
I just connected to Apple Express network and now my printer no longer prints. Do I need a different driver.
If you changed routers your printer is still looking for your old one. Here is how to get it back:
1. On the front of the printer: Setup > Network > Restore Network Defaults.
2. From the same Network menu run the Wireless Setup Wizard.
3. Now, on your computer add the printer. I'd help more but cannot unless I know what operating system you are using.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
i just upgraded my apple TV and now when I rent a movie on iTunes, instead of it playing instantly, it takes 60 hours to load. Anyone else have this problem?
Apple Support, I have just purchased 3 movies 2 from my account and 1 from my wifes account and both systems are stating that it will take 2 days to download. I have a FIOS 150 megabit per second up and 150 megabit per second down busiuness class fiber service to my location. I have tested downloading 10Gbyte files from two other locations and both work fine. I additionally went out and have tested doing speed tests (http://www.speedtest.net/) from over 10 other locations all over the US and all are over 75 magabits per second download speeds with a few hitting 100 and 125 megabit per second speeds. What is wrong with your servers or your internet connection????
This is VERY FUSTRATING!!!
I have additionally tried to download them with my Apple TV and two different PCs all wired on Gigabit Ethernet with jumbo frames enabled. I have tried differnet DNS servers also. I can upload and download files to my office 50G in less than 1 hour. I have also download movies from 2 other movie sites without any problems. -
Just upgrade to 10.8 and now cant print to windows Share
Hi, I just took the plunge and upgraded to 10.8 My old system was 10.6. The problem is the college I work for has a mandate on printing that all print jobs must print through the windows print server. The printer vlan is not accessible to the general public, the queue must be accessed through their 2008 server. My previous installation procedure requires using the LPD path such as this lpd://server_name/queue_name We cannot print via SMB as this would require embedding your password into your key chain. We are forbiden to do this (i dont make the policies, i just follow them)
The type of printer is a xerox 7556, and I am using the latest driver version that supports 10.6, 10.7 and 10.8 (it is version 2.71 from the xerox web site here is the link)
http://www.support.xerox.com/support/workcentre-7545-7556/file-download/enus.htm l?operatingSystem=macosx&fileLanguage=en&&associatedProduct=XRIP_WC7525_base&con tentId=121426&from=downloads&viewArchived=false
I have tried this exact driver with 10.6 and it works flawless
the problem is this:
when you are in your application (ie: safari, word, preview) and "File Print".... before you then verify your print settings and hit print there are 2 files already in the print queue called "Printer Status" and these will not print. They will fail with the error of 'Filter' failed 0 copies. once you then press Print the print job will get stuck behind these "printer status" jobs and if you delete the "printer status" jobs the actual print job is released and prints.
Its and odd one... I have checked a few other of the xerox drivers (7120 and 7755) and they seem to work without this problem. I am forced to use this driver as the machine requires accounting information and the accounting seems to be model specific.
Any thoughts?It seems this is a on going problem that lots of folks have but Xerox does not want to address. From what I can tell, the driver sends a check printer status command to the printer that generates the printer status jobs in the queue. The request is not recognized by the Windows server therefore is ignored.
The command that issues the request can be commented out of the PPD, but that's difficult to support in an enterprise environment.
It would be a simple thing for Xerox to simply put a check box in their setup that would let you turn it off when installing the printer.
Xerox isn't the only one who is making this mistake. I've had the same issue with Ricoh printers.
Interesting side note: Mavericks does not seem to suffer from this issue. -
Help me i just bouth 2 mini ipads and now everythig my daugher download in one mini is downloading in the other and in my ipad 2 we have the same apple id for the 3 ipads
Do two things:
1. In Settings > iTunes & App Stores, turn off automatic downloads for Apps.
2. Assuming you sync using iTunes, turn off the automatic app syncing on the App tab when you have the iPads connected that should not receive the downloads. -
I just got an apple tv and it dosen't work at all. I tried to use the home share feature with my iMac and both devices don't see each other, yet they are o the same network. I am not using a apple router. I tried updating the apple tv to see if that would resolve the issue but now the status light just blinks rapidly. I tried using itunes restore it but all i get is an unknown error. So with all of this said what is the fix apple?
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Just updated my Apple TV and all it shows now Is a picture of it needing to be plugged into iTunes, do I really need to buy a micro USB cord? This seems absurd!
This indicates the device is in recovery mode.
Connect it to a computer running iTunes and restore it. -
It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly. It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected. I tried the whole Apple Guide and it was no help.install the latest version of itunes
-
I had to purchase two OS X system upgrades, snow leopard and mountain lion, just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!
File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
It can be reverted to 10.6.8 yourself.
How to revert your Mac to Snow Leopard
Most commonly used backup methods -
my screen just turned blank white randomly and now it won't turn off/reset or connect to a computer or really do anything... need help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem -
I just replaced my airport extreme and now the amber light on my airport express is blinking. When I go to utilities and try to find the airport express it does not show up.
What should I do?Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.
-
I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??
Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables. -
My Ipod was originally set up as a sub-account of a firends. After that, I got an Iphone and set up my own Apple account. I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account, and staring over. I just really want to get the new Ipod under my own account, and be able to use it...
There is no such thing as a "sub-account." Also, you probably mean iTunes library, when you say "account." Your "account" in iTunes is your Apple ID, which is what you use to sign in to the iTunes Store to make purchases. iPods are associated with an iTunes library, not with an Apple ID (iTunes Store account). You'll need to clarify...
So, this is what I think you are saying. You previously shared an iTunes library on a computer with your friend. Your old iPod was synced to that iTunes library.
You got an iPhone, and at that time, you set up your own iTunes library. Is that on a different computer? How does the iPhone affect your question about the iPod?
You got a new iPod. What is your "old iTunes"? Is that the iTunes library you shared with your friend? -
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Apple TV (3rd generation), OS X Mountain Lion (10.8.3), 2 Apple TV's (3rd Generation).Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
I just rented 2 movies on my Apple TV and now I am getting the message, "Your Apple TV is not authorized to play this content". Now I have 2 Apple TV's and they both are saying the same thing. Yes, I have done reset, restore, etc. but nothing! Frustrated & out $10.
Good call!! Thanks a million. Glad I asked & thanks for the quick response. I was getting frustrated. Thanks again!!!!!
-
i have just reset my iPhone 5 and now when I open the App Store it says "cannot connect to app stpre" "cannot connect to iTunes store" I have googled what to do and everything it says to do I've done... My wifi connection is fine (that's what I'm using as I write) I'm about to sell my phone tomorrow thats why I reser it so I need to fix it what do I do
Hi Rhiannon.A,
Try to reset all setting on your phone and see. If issues still persist try to back up your phone using iTunes and restore it using computer.
Maybe you are looking for
-
How to change the Admin name/password?
Hello, I have a iMac 27 inch i5 16GB RAM (don't think this matters, but just in case) and I am selling it in order to upgrade to the i7. I have bootcamp with windows 8pro and a lot of software on the MAC side. If this guy want to take it as is, is th
-
Unwanting Cropping function - CS3 Illustrator to pdf
When saving an ai-file to pdf (CS3), the pdf-file is cropped to the documentsize. I can not see fx. colorelements larger than the documentformat, which can be needed when I do a job for printing (and cutting). CROP AREA is set to release in OBJECT. I
-
Create new repository fails in 3.1.1
I have created a repository and presented it successfully to my server pool. However, I have just created some smaller iSCSI disks, I can see them in /dev/mapper/* and in the output of multipath -ll on the server. When I try to create a new repositor
-
I started with WEBI but can we achieve this in DESKI !!!! I am posting this in Both DESKI and WEBI Forums. I am working on a WEBI report where i want to break on a column which is a calculated one. The calculation is very simple. I have a Date column
-
An error has occurred which stopped the processing of the PDF. Trying to convert a .tif file
I'm new to this conversion system. I tried several times to convert a .tif file to a .pdf file. I got the same message every time: "An error has occurred which stopped the processing of the PDF". What am I doing wrong?