I just created an iTunes library, how do I revert back to my default library?

I just created a new iTunes library, how do I return to my default library?

Quit iTunes, start it up again holding down the option key on your keyboard. When presented with the choices, select your original library.
Best of luck.

Similar Messages

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library?

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library? Can anyone help?

I have no idea what you did or what happened - but I can assure you that loading from a different camera does not create a new library
So you need to supply information and someone here will assist you in sorting this out and figuring out what you really did
What version of iPhoto do you have? What version of the OS? Why do you think that a second library has been created? What do you see when you launch iPhoto with the optipon kep depressed and use the select library option? Where is your iPhoto library normally?
Anything else you can tell us that might help?
LN

How can I revert back to the default config on Secure Access Server 5.3?

We recently purchased new Secure Access Control Servers version 5.1 and have upgraded to version 5.3 with current patches. Several people have configured one of the appliances and we would like to revert back to the original config with no NDGs or Devices or any other variables configured. Is this possible?

While looking up a command in the CLI reference, I also found the command to reset the acs to factory default. It is "acs reset-config". This resets the acs portion only, not the linux appliance, so your IP addresses, DNS, etc. are retained. It does clear out the license for the ACS, so if you use this make sure you have the license file. You will also have to go through the initial password setup again.

I just clean installed maverick on my computer and I have nothing in my iTunes library, how can I get back all the music I have bought?

I just clean installed maverick on my computer and I have nothing in my iTunes library, how can I get back all the music I have bought?

From your backups. By doing a clean install you erased your startup volume. You may have installed OS X, but your personal software was erased. You can restore from backups if your have them. If not, then you've lost it all, permanently.

I have replaced my laptop and installed iTunes. When I try to sync my iPad or iPhone it says they are already linked to another iTunes library. How do I get back to my original library.

I have replaced my laptop and installed iTunes. When iffy to sync my iPad or iPhone it says they are already linked to another iTunes library and will only let me transfer purchased items. How do I get back to my original library.

Check out the solution found here.
If you do a restore you will lose everything. Some things will be backed up in iCloud but not everything.

I just redeemed an itunes card how do I know what my balance is for my account

I just redeemed an itunes card how do I know what my balance is for my account

If you are on your computer's iTunes and you are signed into your account then it should show at the top of the iTunes store pages next to your account id - or you can log into your account via Store > View My Account (Store > View My Apple ID on iTunes 11) and it should show on the top section of the screen that you are taken to.
On an iPad, iPhone or iPod Touch it should show on, for example, the bottom of the Featured tab in the App Store app or the Music tab in the iTunes app next to your id.

How do I revert back to previous (before 11) itunes. Someone nicked my Album Cover flow, without asking

how do I revert back to previous (before 11) itunes.
Someone nicked my Album Cover flow, without asking. I have snow leopard. I was happy. Just before Christmas as if I havent got enough to do Thank You. I've given Apple loads of money this year--presents and all, the least they could do is tell me, they're going to take stuff off of My computer that I enjoy,/ find very useful/ and worked hard to update all my album covers and have a gallery of my own artwork for my mixes--it was beautiful. When I went to add some more, the facility had been taken away from me. Was so dissapointed. They send me emails all the time to buy the latest must have products. I even did a questionair to help them. They really care for their customers--right. So why couldnt they warn me about this update, its only polite.
If I bought a warm coat some years ago, then the manufatures came round without my knowledge and cut off the left arm, and later told me, their reserch says that people dont use the left arm so much so they have to get rid of it. 1. I think that would be illegal. 2. its impolite not to ask if they could do it. 3. why not give me an options to keep it, seeing as i bought it. 4. its ludicrous.
I trusted Apple-but then -they took my YouTube off my ipad. I cant update to newer software as I will lose some expensive programms (Im not made of money). I also have 2 oldish defunct but fully working laser printers (if they were compatible with new software).
Im not a techky-I just use the stuff, I do art and music and Cover Flow was equipement I used.
I want to get rid of itunes 11, anyhelp out there

click the blue download button...
http://support.apple.com/kb/DL1576

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes and ultimately upload to YouTube. The volume reverts back to a default? low l

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

I installed 6.0.2 on OS10.7.5 and now Safari won't open. 6.0.2 is just for Mountain Lion. How do I revert to 6.0.1?

I installed 6.0.2 on OS10.7.5 and now Safari won't open. 6.0.2 is just for Mountain Lion. How do I revert to 6.0.1?

I do have a cloned back-up, so I tried to just copy Safari 6.0.1 back onto my main drive—wouldn't work. Got a message that the System needs Safari and I can't touch it.
I'm trying to find a simpler way to revert than clone backwards, which takes a lot of time. And actually I never use Safari. I'm a Chrome user.
You are correct that I downloaded 6.0.2, rather than using software update. However, with many other pieces of software, if you try to install over the wrong system, you get a message telling you that the installation can't be done. Apple could have saved a lot of trouble by using this message.
I have three machines of different vintage, so one is on 10.6.8, one on 10.7.5 and one on 10.8.2. I am usually pretty careful about software updates and which system is needed. Unfortunately, in this case I used CNET download, and the description of 6.0.2 said it was for Lion and Mountain Lion.

My ipad mini will not sync with itunes properly since ios8.02. How do I revert back to ios 8.0?

My ipad mini will not sync with itunes properly since ios8.02. How do I revert back to ios 8.0?

Hi SBonner,
Welcome to the Support Communities!
The article below may be able to help you with this.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

The profile manager only shows my new profile. How do I switch back to my default profile?

I just made a new profile to use exclusively with an alternate version of Firefox. My regular version accidentally opened this new profile, so I tried using profile manager to set it back to the default. However, the profile manager is only showing my new profile. /appdata/roaming/mozilla/firefox/profiles shows that I still have my default and my new profile. Putting -P "default" in the target line just opens up profile manager. How do I switch back to my default profile or get it to show up in profile manager?

When a profile doesn't show in the Profile Manager then you can register this profile by using the Profile Manager to create a new profile.
You can click the "Choose Folder" button to make Firefox recognize and use an already existing profile.
It is best to create a desktop shortcut that selects a specific profile (-P "profile_name") to avoid opening a profile with the wrong Firefox version.<br />
Make sure to select the profile for the default browser in the Profile Manager, so that is used when you click a link in an external program.
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
You can use the -no-remote command line switch to open another Firefox instance with its own profile and run multiple Firefox instances simultaneously.
*http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

I updated to new ios and now it is not syncing properly. How can i revert back to the previous installed version?

I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?

Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square?

I updated to the latest version of Safari now I cannot log into certain websites like my online banking. How do I revert back to an older version?

I updated to the latest version of Safari now I cannot log into certain websites like my online banking. Another reason I loved using this computer was autofill, now that does not work the same either, I have to respond twice to get my info to fill in. I fill out many forms in a day and this change has been so bad that I have downloaded Mozilla Firefox to use instead. I hope apple fixes these issues but until then how do I revert back to an older version of Safari?

Quit Safari.
Open Keychain Access /Applications/Utilities
Select Passwords on the left. Delete any keychains for sites you have problems logging into.
Relaunch Safari. Go to Safari / Preferences - Autofill. Make sure all three boxes are selected.
Now navigate to a site, login with your user name and password. You should be prompted to save that data to a new keychain. Click Yes.
If you still have problems, go to ~/Library/Cookies. Move the Cookies.plist file to the Trash.
~ (Tilde) represents your Home folder.
Try logging into a site again.

How do I revert back to IOS 10.8 on my 27" iMac? Since I upgraded to 10.9 on Monday I am unable to use my buttons in the App Store window, notes or ibook window.

How do I revert back to IOS 10.8 on my 27" iMac intel version? Since I upgraded to 10.9 on Monday I am unable to use my mouse buttons in the App Store window, notes or ibook windows. It works everywhere elese but not in any Apple application system windows.

I'll try it. I don't have much confidence in it actually working since I'm having the same issue with all mouses (Bluetooth and wired) and my Bamboo Create.
Can you also tell me how to revert back to IOS 10.8 in case resetting mouse preferences do not work? I have already gone back and restored my system to before the up grade but it didn't restore the IOS system.

I just created an iTunes library, how do I revert back to my default library?

Similar Messages

Maybe you are looking for