I just downloaded the most recent version of itunes and I bout songs and they wont play all the way

When I went to play the songs it gets 40-50 seconds into it the abrubtly stops and switches to the next song. If its any help it was the "Get scraped" album by deadmau5

try going into your purchased file on the left side of iTunes, and play it from there. you can delete the purchased song if it doesn't play, and re-download it as well. just be sure to toss it, and library files into trash, then re-download from your purchased file.

Similar Messages

  • I downloaded the most recent version of iTunes and now it won't launch

    I have a PC with over 800 gb of space, most of which is unused, and am running Windows 7, and when I opened iTunes (which opened and worked just fine) I was prompted to download the most recent version of iTunes and iCloud.  Upon completion of the download, which indicated it was successful, I had to restart my computer.  When I tried to launch iTunes this time, I got two error messages:  "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll"   and   "iTunes was not installed correctly.  Please reinstall iTunes."
    Last summer I got to the point where I was unable to access iTunes at all and worked for weeks with Apple support to correct the issue to no avail.  I had my computer in the shop and they were able to clean up a couple of corrupted files, and thereafter iTunes worked great.
    I'm afraid to uninstall iTunes for fear I'll never get it back.   Anybody have suggestions?
    Thanks,
    Littleredz24

    P. S.  Just got brave and uninstalled iTunes and re-installed it.  Got the same error message:  Entry Point Not Found - The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll
    Now I can't get to iTunes at all.  Help, please!
    Littleredz24

  • I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    First, are you positive it is really not there?  Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
    If your media are gone it is a lot easier to restore from a proper computer backup.  Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

  • HT1152 I downloaded the most recent version of itunes and now I cannot burn CDs....the CD burner and drive are gone....any help???

    Yesterday I downloaded the most recent version of itunes and created a playlist....i was unable to burn it to a CD.  Message was there was no burner...it's like the entire drive is missing from my computer.  My computer tech guy said the same thing happened to him but he hasn't found the fix yet.  Any help???

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • Since downloading the most recent version of iTunes, I have to accept the software terms and conditions every time I open iTunes

    Since installing the most recent version of iTunes, I have to accept the software terms and conditions every time I go in to iTunes.  I sign in to my account, but when I re-open iTunes, as well as having to accept the terms and conditions before continuing, I find that iTunes has logged me out of my account.  None of this has happened before.  I am using a PC with Windows 8.

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • How do I update to the most recent version of itunes?

    How do I update to the most recent version of Itunes?

    just hit the  logo in the menu bar (the menu bar is the bar wich is in the top of ur screen) then click "Software Update..." and check the where it says iTunes, then click Update. ur mac will restart and then iTunes will have the latest version (10.5.1)    
    George Karakadas, hope this will help u
    <Edited by Host>

  • HT4623 I have followed the directions and my iphone is not installing the iOS 7.0.2.  My iphone is plugged into my lap top that has the most recent version of itunes.  It is a dsl connection.  Is that my problem?

    I have followed the directions and my iphone is not installing the iOS 7.0.2.  I have the most recent version of itunes on my laptop commuter.  my iphone is attached to my laptop via usb port.  The laptop uses dsl not wifi.  Is that my problem?

    Exactly what version of iTunes are you running? And DON'T say 'the latest version'... CHECK the version number. You need to be running 11.1 or higher.

  • I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store.  It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available.  Please help.

    Welcome to the Apple Support Communities
    One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
    First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
    We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

  • I updated to the most recent version of Itunes and I do not see iOS5.  Where is it?  Everything is the same, no difference.

    I updated to the most recent version of Itunes and I do not see iOS5.  Where is it?  Everything is the same, no difference.

    iTunes checks for updates approx. once a week. If you go to the Summary page for your Touch and look next to the" Check for Updates" button it lists the date that iTunes will perform the next check for updates. To check for an update before this date, click the "Check  for Updates" button. If iTunes doesn't indicate that the iOS 5 update is available for your device then you're Touch is probably not supported by the new OS.

  • After I downloaded the most recent versions of itunes and quicktime  I cannot play any videos, tutorials.  Thank you for any help.

    Videos will not play after downloading the mmost recent versions of Itunes and Quicktime.  What can I do?  The video tries to start but freezes and does not respond.

    Appreciate the suggestion.  I did the repair, but videos still don't play.
    I tried putting quicktime in "safe mode", but that also did not solve the video-play problem.
    However, I downloaded a video and that video does play.
    A video may start but quickly freezes.
    In itunes is the player "quicktime or itunes"?
    When I open the quicktime player(its appearance doesn't look like a player with controls for play, pause, etc.).
    Maybe the controls appear when play begins' however, then I try to open any song of video, I always get the same message:  "Do you want to allow this website to open a program on your computer(in itunes, I assume).)
    If i choose "yes" I get an error message.
    I thought this additional information might be helpful, but you can just answer the original question if you have some additional ideas.
    Thanks for your help.

  • I downloaded the most recent version of iTunes. Now, it won't open. How can I fix this?

    Recently, I downloaded iTunes version 10.5.3. Now, I double click it on my desktop, and in the iTunes process appears briefly in Task Manager. It gets up to the memory usage where it normally opens, but now, when it gets to that point, the task disappears, and won't reappear. I've tried many times to reopen it, but the same problem happens every time. I have already reinstalled iTunes, then removed it completely and installed it again, and the problem persists. Is there any way I can fix the problem?

    Try following steps and test one at a time:
    1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
    2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • HT1386 I received my new IPad yesterday and when I attempt to sync with Itunes I get the message that it can't be used because  I need ITunes 11.1 or later.  Here is my question.  How do I download to my IPad the most recent version of ITunes?

    Just received IPad four yesterday and am having difficulting syncing with IMac.  I receive this error message:
    The iPad “Blaine's iPad” cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes.
    When I go to www.itunes.com I am unsusseful in making the download.  Please step me through the process.
    BlaineRW

  • How to synch in the most recent version of iTunes - 11.0.0.163 - The latest version updated today and changed the look of the program. I can't see where to click to synch. If I disconnect and restart it works fine automatically, but why do that?

    I updated the latest version of iTunes today and it has a new look. That's fine but I can't see where to click to synch my ipod after downloading music or podcasts. It was always easy.

    It might make it much easier on you if you enable the sidebar in iTunes. Launch iTunes and go to View>Show Sidebar. With iTunes set up like that, it should look a lot more familiar to you. You can select your device name under the devices heading and then go through all of the iTunes panes by clicking on them at the top of the iTunes Window.
    My screenshot shows my iPad, but it works the same way with an iPod.

  • After upgrading to the most recent version of iTunes, for the second time now, I have completely lost all of my playlists and some of my music

    I have upgraded to the current version of iTunes 12.0.1.26
    I am using Windows 7 Premium
    I have lost all of my previous playlists and some of my music
    This is the second time this has happened when advised of an updated version.
    How can I get all my music and playlists back without having to redo them again?

    Hello richmondhill49,
    The article linked below details a number of steps that may help restore your content and playlists to iTunes.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    Cheers,
    Allen

  • I just updated my iPhoto to the most recent version along with updating to OS lion.  I had transferred all of my photos to my iPhoto and turned on photo stream so I could view them on my iPad.  when I tried to open my iPhoto today it would not allow me to

    It keeps saying that i need to choose a library to open.  When i look for a library I find the iphoto in my pictures folder but it shows up as a folder not as a  iphoto icon.  How can I get it to use that library again?

    It sounds like that Library is damaged. Restore from your back up is the simple surefire solution.
    Regards
    TD

Maybe you are looking for

  • System not configured as XI Integration Engin

    Hi Experts,                          My system working fine up to yesterday but today morning when i came and saw this error is comming <b>System not configured as XI Integration Engin</b>  this error is showing in MONI .. Regards Rao

  • Synced mp3 not working on ipad

    I'm trying to sync my music on iPad Air for a longer time, but it doesn't work preperly. I removed all my music from iPad already 3 times and synced again, but nothing. Whenever I check "Convert higher bit rate songs to 192 kbps AAC, there is always

  • PANASONIC DMC-FZ50 to be supported?

    i downloaded 10.4.10 and my LX1 is very happy of official support, so thankyou apple.. but looking at camera compatibility on aperture's official page i can clearly see FZ50 listed between supported cameras.. but for now it is only supported by my ha

  • Request UEFI GOP VBIOS For MSI r6850 hawk

    i want to enable Fastboot Mode for Windows 8 but my VGA Bios isn't a UEFI GOP my garphic card  :  MSI  R6850 hawk       S/N                : 602-V244-250从207028544 current VBios  :   h ttp://pan.baidu.com/s/1o6mEosy

  • X200T multitouch not working

    Just got my new x200 with the capacitative multitouch screen Friday. The multitouch has never worked, but more troubling, today the normal touch isn't working either. The trackpoint and stylus are functioning perfectly.Any ideas on how to fix this? A