I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes. And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter what recovery mode wont work
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.
Similar Messages
-
its stuck please help i just bought my new ipod touch 4g less than a month ago. and now im scared its like broken forever.
Just restore it.
It will restore to the latest available software -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?
We can't help you if you don't even know what you are installing. Never install anything if you do not know what it is. Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
That being said, it appears you attempted to upgrade to Mavarick. Although I am not positive.
Sorry, I am going to back out of this because I nor you know what it was you installed. Hopefully, someone else will chime in here.
GOOD LUCK! -
Can someone please help me with retoring my iphone 3gs. Error 3194 is constantly popping up. My phone is stuck on a screen with an itunes logo and an apple cord
Make an appointment at an Apple store if there is one nearby.
-
Help, Turned on MacBook Pro this morning and just get a white screen with grey apple logo and spinning gear. Cannot access desktop.
Computer starts up in Safe boot by holding down the shift button. But when I go to restart the same thing happens. What should I do?
-
Please HELP, Stuck on grey screen with Old Apple Logo in it
Hi , my computer froze today and when I tried to reboot the hard drive starts but stays on a grey screen with a small folder in the middle with an Apple logo in it.
What should I do, all suggestions welcome!Hi, and welcome to Apple Discussions.
Here are links to a couple of articles on recovering from the flashing question mark folder:
http://docs.info.apple.com/article.html?artnum=58042
http://www.bombich.com/mactips/openfirmware.html
I hope something there helps. -
Stuck at white screen with grey apple logo
When I turn on my MacBook Pro, it is stuck at the white screen with grey apple logo. What do I do?
Thank you!I was looking at this and it helped! http://support.apple.com/kb/TS2570
1) Disconnect, test peripheral devices and network cables - didn't work
2) Perform a Safe Boot - didn't work
3) Reset the NVRAM / PRAM - worked, yay! -
I started to Update my Ipod, and now it is a useless paper weight, what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!
Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.
-
nephew had mutliple tabs open and shut down the iMac by hitting the button on the back instead of closing everything corectly. Now the only screen i get is the white with apple logo and the loading circle icon. i have attempted restart and c key with disk in but cant even get a menu to come up. What can I attempt from home before having to haul this into the store?
wireless keyboard and mouse were working prior to safe mode attempt, i was able to eject disk. still waiting on the safe mode restart. I'm not sure what I should be looking for to confirm safe mode and what the screen should look like if successfully processing. it seems to be putting off a lot of heat. BRB
Message was edited by: FeydakeeeeenHelpMePlease -
Mac Stuck at Startup Screen with Grey Apple Logo,Empty Progress Bar and a Spinning wheel
Last night the electricity went out and my power surge protector was not working so my iMac just force shut downed.
So, when the electricity came back i turned on my Mac but it is *Stuck in the Startup/Boot Screen with a Grey Apple Logo,a Empty Progress Bar with stays for 1 or 2 minutes and a small Spinning Wheel which would Spin Forver! I Have tried the SMC and Pram reset but no use, i have also tried to insert my OS X Lion 10.7 Installation disk and it would not load if i hold the C Key in the Startup, I Have Managed to go to Disk Utility Through "Recovery HD" but the Volume "Macintosh HD" is Greyed out and Unmounted and i cannot repair it. There are some files that i'd like to Recover if there is a way to fix it without deleting files.
**PLEASE HELP ME FIX THIS!**
Details about the iMac:
iMac 21.5 Inch i think from Mid 2010,
OS X Lion installed maybe 10.7.2 or 10.7.3 (im not sure)kernel
Grey screen with Metallic Apple and spinning gear
Sounds to me like your hard drive failed on you as a result of the power going out.
http://www.apple.com/support/imac-harddrive/
If your iMac is a Mid 2010 you qualify for the hard drive replacement program from Apple.
Apple has determined that certain Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems may fail. These systems were sold between October 2009 and July 2011.
I hope I helped you with your problem.
- Brandon -
my pascode wont work, ive tried the recovery mode but that wont work because of a network connection error, what do i do
Does the the computer connect to the internet?
If yes
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Non-booting Mac mini (stuck at gray screen with no Apple logo or others)
We've got a G4 Mac mini whose motherboard was recently replaced. I've put it back together carefully following the instructions on pbfixit.com, but I can't get it to boot.
When powered on, the chime sounds normal, and the screen comes on after a few seconds with a gray background--no Apple log, no spinner, no error, no flashing icons, nothing.
I've already zapped the PRAM 3 times using OptCmd+PR, no go.
I'm able to get into OpenFirmware using OptCmd+OF and have done reset-nvram and reset-all, restarting the machine, but no luck. The system date remains current also, indicating perhaps it's not resetting the PRAM either way somehow.
The disc drive won't accept a boot CD or DVD as if it's unpowered, but it's snugly connected.
I'm unsure what to test next. Suggestions? Thanks.Greetings,
I just had the exact same problem with a Mini. Would only boot to a gray screen no matter what I did. Booting into the OpenFirmware did help, booting into the Startup utility (by holding "T" down at startup showed no hard drive and no CD/DVD drive.
Hold on to your hat . . . .
The issue was the battery. These guys have a Lithium battery that allows them to boot up, a battery that can be purchased anywhere that sells those kinds of thing. I bought 2 for $3.50, it was more time and trouble to get into the case and get at the logic board but once the battery was replaced everything works like a dream.
Here is an excellent step-by-step tutorial about getting into the case http://www.sterpin.net/uk/ddMacMiniuk.htm. Just make sure that doing so doesn't void any warranties.
Good Luck!
Gail
Maybe you are looking for
-
How can I put an e-mail in my trash folder back into my inbox?
I mistakenly deleted several e-mails from my inbox, which are now in my trash folder. I want to save them for their content and their e-mail addresses. How can I place them back into my inbox.? Thank you.
-
Tables and fields for blocked invoices
hi, what r the tables and fields which r required to develop a report that displays blocked invoices. thanks kishore
-
How do I add URLs to be blocked in the popup blocker?
The FAQs and help pages don't seem to help with this, so... The popup blocker built into Firefox allows URLs to be added to an existing long list, but only as 'allow'. I can delete (remove) existing items or those I've added, but I cannot change the
-
Export internal table to memory.
How can I export and import an internal table to memory? This: export messtab to memory id 'TAB'. (in program 1) import messtab=messtab from memory id 'TAB'. (in program 2) does not work.
-
Nokia E6 issues -- Screen lock and Connectivity
I have two problems with Nokia E6. Struggling to get resolution 1. My screens get locked automatically with 7-8 sec even though I set up the screen locking time in more than 1 minute. It goes in lock state even you have active application running lik