I just got a new iPod touch 4th generation and the built-in speaker doesn't work. Is it broken? Or do I have to turn it on somehow?
I'm not sure if I have to turn in on somewhere in settings or is it simply broken.
Help?
Try increasing the volue using the volume up-down buttons on the upper left side of the iPod
Similar Messages
-
It says the software version is 4.2.1 amd that it's downloaded the iOS 4.3.3 version, but when I hit the update button it does the "extracting" bit and then when it gets to the "verifying update with Apple" it says
The iPod "Tanuj's iPod" could not be updated. An unknown error occured (3194)
I looked up that error and it said that that meant that my iTunes wasnt up to date. I checked, but it actually was up to date, but I re-installed the whole thing just to be sure, but it's still not updating.Yep, it say iTunes 10.3.1.55
I tried searching for 3194, and someone pointed to http://support.apple.com/kb/TS3694#error3194 and that says:
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
I'm sure I have the latest version of iTunes, but what's an updater log? -
I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.
What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points -
Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?
If it is plugged into a USB hub (or the spare keyboard port), try connecting it to a direct USB port.
Also, try doing this Reset procedure, while it is connect to power.
http://support.apple.com/kb/HT1320
NOTE: A new iPod nano is 6th gen. -
i just got a new ipod touch 64 gb 4th generation after my old one got cracked. my mum backed up all my stuff on my laptop pc but i tried to sync everything back on to my ipod but there are non of the music files there + the pictures wont download
itunes content is not part of the backup as it should all be in itunes on your computer.
What pics won't download?
Please explain your issue. -
I don't know what to do please help.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help
What happens when you try to install the iTunes update? Error messages?
You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem. -
I have an iPod touch 4th generation and after sending emoji it no longer works. Every time I try to open iMessage it closes. I have already tried resetting and restarting my iPod and neither has worked.
Have you tried getting rid of emoji?
-
It's Christmas morning and my parents bought me a new iPod Touch 4th Generation 4G 32GB. I started charging it, 5mins later I walked back into my room and there I saw it - frozen, white screen with light green, vertical lines. It's brand new, and I just opened it about 5mins prior. I never dropped it, it never touched water. My mum bought it at the nearby Target. I opened it, in it's case and everything. So I have no clue what happened. I really hope the workers at Target didn't just sell me a broken iPod. This really stinks, and I really hope somebody can help me. I feel terrible for my mum having spent so much on it. So please, someone help me out.
Hello planb77 / PANIDORA, I'm having the same problem. I'm using my iPhone 5S or my iPad Mini cable and wall charger to do it (both originals) , and the iPod Shuffle does not charge at all, doesn't matter if is direct on the wall or trough my Macbook Air.I 've restored it once, but nothing has changed. What else can I do?
-
I just got a new ipod touch 4g yesterday and it is stuck on apple logo and loading screen
i just got a new ipod touch yesterday. i was uploading it today. when i was downloading the new software 5.1 it does the same thing it did to my old one which was a ipod touch 4g also. it goes to the apple logo then the loading screen then it turns white, then it does it all over again. i have done everything and and really getting annoyed. could it be the software? please someone help me.!
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to computer and try to restore via iTunes.
- If the iPod continues to cycle like you describe, let the battery fully drain. It may take a while. After charging for an hour try the above again. -
I recently purchased a new iPod Touch. The "keyboard" of my first generation was beginning to play up, but it still worked fine with my TomTom carkit (if you'll allow for the fact that being restricted to OS 3 meant you couldn't update the software either). But, contrary to what I'd been told, the fourth generation one refuses to work. I think it's making contact because I hear the connection beep, but it doesn't charge up or seem able to find the satellite connection. I've seen someone saying it was a physical width problem. If it's making contact, why isn't it capable to pick up a signal? Is there a compatibility issue after all?
Got you! Why this didn't come up in my search before, have no idea. So it's all a question of design... How mean not to inform manufacturers of accessories about the change in specs. About to try the folded-over business card solution and then Velcro if the former doesn't give satisfaction. Did actually buy a silicon case, but it makes the protective filter buckle as it gets under the edges which isn't exactly useful. Went back to my previous leather case which I have to remove to use the car kit...
-
I just bought a new ipod touch 4th generation a week ago and now its frozen :(
i just got a 4th generation ipod touch about a month ago and turned it on a week ago & now its totally frozen it started by the music and itunes freezing then the apps now theres an apple on the screen =((
Hi,
If there is an Apple on your screen, that means you have reset your iPod and are turning it back on. Have you reset your iPod? If not, try here: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird--- -
Ive got an ipod touch 4th generation and the screen got a crack
A few months ago i dropped my ipod touch and its screen got cracked.its working fine but the screen is starting to get an grey spot from the right side top end which is blocking the battery sign and the spot is growing larger.is there anyway i can get it fixed?what is the reason for this problem??
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit
Reason is the moisture/humidity got into the screen internals through the crack and that is effecting the actual LCD in that area -
I have Lpod touch iOS 5.0.1 and I would like to know if I need any software to have mirrot screen using HDMI connector and FHD TV?
While the 4G iPod support HDMI TV out, only the iPad 2 supports mirroring TV out via HDMI and VGA.
Maybe you are looking for
-
Error while deploying from NWDS
Hi, i am getting the following error while trying to deploy a PAR file from NWDS through export. PAR upload failed:C:\Documents and settings\Trials\Trials.par Please check the userid and password. i cross checked the userid and password.both are corr
-
Creation of PO in SD Module for vendor
Hi SD guru's I have a scenario in SD module wherein i have to issue a PO to the vendor to carry out a service for me. How do i go about this? Can this be automated based on few reports that i generate? Thanks & Regards Ravi
-
Can anyone help me with this? I have a set of Cue Points in an FLV I'm playing. It's an interactive quiz, so the idea is that flash will change a variable, theAnswer, to a different letter depending on which question it is. The answer to question 1 i
-
OSPF downward bit in MPLS network
Hi all, I have an issue with using the OSPF downward bit and hope someone has seen this before. It appears to do nothing in this example to prevent routes being learnt via the wrong path. That is via a backup router that has learnt the route from t
-
Is there any way to change the label of my VO attributes
hi , Is there any way to change the label of my VO attributes so that it will have more logical presentation Thanks Musahib