I just got an ipad from a pawnshop. How do I change the user
I just got an ipad from a pawnshop. How do I change the user sign in ... to my email and not the previous owners
If
Settings
General
erase all content and settings
doesn't work or requires you to enter the apple ID to wipe the device, take it back to the pawnshop and get your money back.
Similar Messages
-
I just got a new macbook pro. How do I get the 900+ songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.
http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US
-
We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting FaceTime and messages for my 12 yr. old. Do I have to set up a separate Apple ID for her to avoid this?
It's a trust issue. You can set them up so you don't receive each other's messages as long as you each have your own email address.
The trust issue is the fact that either of you can change the separation at any time via Settings by checking the appropriate (inappropriate?) email address.
To be absolutely sure you can never receive each other's messages will require two Apple IDs. -
I have a 5 year old Mac Book with OS 10.6.8 and it can not be upgraded to Mountain Lion. I just got an iPad with retina. How do I get an iMovie project onto my iPad?
I have a 5 year old Mac Book with OS 10.6.8 and it can not be upgraded to Mountain Lion. I just got an iPad with retina. How do I get an iMovie project onto my iPad?
-
How do I change the user agent for Safari on my iPad? I know how to do it on my desktop version, but I need it for my iPad.
You can rename the iPad here:
Settings - General - About - Name
For Siri make sure he has himself as a contact in the Contacts app then:
Settings - General - Siri - My Info and select his contact info -
How do I change the user information from original iPad owner to the new owner
I purchased the iPad2, and gave my sister my first one...how do I change the AT&T 3G account from my name and info, to hers?
I hope someone please has the answer cause she can't get online...she is totally dependent on the 3G at this time...no wireless network...so she can't go online...
Thanks in advance for any helpJust swap the SIM cards as indicated here:
http://support.apple.com/kb/HT4582?viewlocale=en_US
I just did it for my new iPad after selling my old one to my parents. Worked like a charm! -
anybody can help?
How can I change the language from USA to Chinese? I already select in setup.If it didn't take for some reason, go to System Preferences… and select the Languages & Text preference pane and reorder the languages accordingly.
Note however that specifying a language may not necessarily change everything about a system to being in that language. -
HT5622 How can I change the user of the IPad??
Any body knows how to change the user of the IPad 1
Sure. Erase the old user's information by doing:
Settings > General > Reset > Erase All Content and Settings
Then the new user will set up the iPad as if it just came out of the box. -
I use an iPad 2 at work that has a different apple id for iCloud than my own personal new iPad. How can I change the company's id for iCloud to synchronize with my own personal iPad?
Go to Settings>iTunes and App Stores and tap the Apple ID listed and sign out and sign in with other ID
You also may want to go to other places like:
- Settings>iCloud
- Settinge>FaceTime
- Settings>Messages>Send and Receive and change the ID
It may be best to go to Settings>General>Reset>Erase all Content and Settings and start over again and set up the iPod again with his account/ID -
How can i change the user that open the rfc connection (sm58) from R/3?
Hi all,
i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
I hope i've been clear...
thanks for the help
S.Hi...
Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC and you can buid the error message with this parameter and identify the user of execution...
I hope this helps you
Regards -
I bought an iphone from a friend how do I change the registration and info to mine
I bought an iphone from a friend, how can i change he registration and personalize for me?
Restore it as new.
iPhone User Guide (For iOS 5.1 Software) -
I just got a ipad mini off criageslist how do i reset it
i need help with my ipad mini
If it is on iOS 7 and the owner neglected to erase the iPad before giving it away, then if you restore it you will not be able to use it due to Activation Lock - http://support.apple.com/kb/HT5818
In this case, do not restore it unless you have contact with the original owner, to either return it and buy an iPad from a legitimate source where this issue will not occur, or ask them to do this - http://support.apple.com/kb/PH2702. -
I have bought my iPad from Germany.
It goes to iPad store of Germany!!!
I need to change it to English one.Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
My dad has messages from my ipad. He doesn't want the messages that I text. How can I chane the email on the I cloud?
Simply stop using the same Apple ID for iMessage on both devices.
-
so my ibook as i wrote will not boot from the cd rom. it always wants to boot from the hd but i had the hd wiped b/c it had linux and it would not allow me to access the firmware. now that the hd is clean i was able to access the firmware but i dont know how to change the boot sequence. the starts to spin in the drive and acts like it want to boot from the cd but the cd just keeps spinning and i get a screen with a blinking question mark and smiley face.
Hello and welcome to the support community.
Why do you need to go into the firmware?
If the disk is a boot disk like Mac OS X, then all you need to do is hold down 'C' key or the option key while the disk is in the drive and the iBook is booting up (After the chime)
If either doesn't work, then there must be an issue with the disk not being a boot disk or corrupted. Alternatively a problem with the optical drive. You don't need to go into the firmware to change any boot selection.
Hope this helps
Maybe you are looking for
-
Unix command in ARD to remove DNS Servers from Network prefs?
I need to know how to send a unix command to remove DNS Servers in Network preferences. I need the DNS Servers field to be blank. Can this be done?
-
Hi All,How to set printer configuration for sap4.7 IDES version for home pr
Hi All, Pls provide the information How to set the configuration for our home printer from the sap 4.7 IDES version .If possible pls provide with screen shots thanks & regards. bharat
-
Crystal 8.5 to 11 Conversion
<p>Is there a procedure to convert reports written in 8.5 to 11?</p><p>Please let me know</p><p>P.S. We are on SQL Server 2000 and all the reports are based on the stored procedures.</p><p>Alex</p>
-
How to add customer group(KNVV-KDGRP)in the standard report?
Dear All, My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report. how to add customer group in the standard report? thanking you, regards, Rupang shah
-
No orageneric9 in java.library.path on Win2000
I have installed Instant Client on Win2000 by creating a directory, unzipping the archive to it, and adding it to my path. I get an UnsatisfiedLinkError when I try to connect to the database. "Exception in thread "main" java.lang.UnsatisfiedLinkError