I just got an Ipod Classic and when i try to sync it it syncs half then deletes it all and disconnects
Whenever i plug my Ipod Classic (new) into my computer it says Sync in progress, then switches to "OK to disconnect" after loading about 40 songs on, and then deleting them off the Ipod. What's going on? All the computer says is "cannot load songs, unknown error occured."
To help in troubleshooting,
What is your iTunes version?
What is your iPod firmware number, as shown on the Itunes summary page?
You problem is iTunes timeout the sync process because there is no response from the iPod. Possible causes
iPod Hardisk malfunctioning.
Antivirus scanning
Other USB devices, using up the USB resource
iPod connected to USB 1.1 port instead of High Power USB2.0 Port
IPod connected to USB Hub.
Windows plugins or Malware using up CPU resource.
Whenever you sync or Restore the IPod, connect the iPod to the Back panel USB 2.0 port, disconnect all other USB devices except the mouse, and disconnect from Internet, stop your antivirus.
But if the above doesn't work, bring it back to Apple , since it is under warranty.
You can also do a Disk Diagnostic as posted regularly by tt2, to check your Hardisk, it wont fix the problem but help you decide what to do.
https://discussions.apple.com/thread/3110831?tstart=240
The DD is for all users, Windows and Mac, so don't concern yourself that tt2 is responding to a Mac user.
Similar Messages
-
Just got the iPod Classic. What is taking up 12GB of space when it says it's empty? (Hoping to clear it)
rockindon wrote:
What is taking up 12GB of space when it says it's empty?
The operating system and space reserved for the iPod to carry out its tasks, such as remembering what you have played and how many times you've played it (this information is Synced back to your iTunes Library at each Sync.) There is also a slight discrepancy in the way that storage size is calculated, which accounts for some of that 12GB.
rockindon wrote:
(Hoping to clear it)
You cannot.
You still have 148GB for storing your music, vidoes and Podcasts. That's quite a lot.
My music library is currently 115.78GB and is a mixture of songs at various Bit Rates. (The higher the Bit Rate, usually, the better the quality.) It has more than 17,000 songs and will play (non-stop) for 58 days.
If your Library becomes (or already is) larger than this, it is possible to set iTunes to automatically manage the content, by removing (for example) recently played songs (except any specific ones you always want on your iPod) and then to put back onto the iPod songs that haven't been played for a while.
If you would like any detail on how this is done, let us know.
In the meantime, enjoy your iPod.
Create your Library of music and - my advice is - to use Sync to add everything to your iPod. In other words, do not use Manually Manage. In the long run, Sync is easier. You can still fully control what is on the iPod using Sync. Again, if you need help, this is the place to ask. Generally speaking, the more points a user has, the more people feel that have been helped by that user. -
How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
Just got a iPod Classic and I need help. Been trying for a few days already
Just got my iPod classic. Plugged it in once and iTunes read it fine, I uploaded a few songs. Later that night, I plugged it back in...and the ipod cant get pass the Connected screen. Once that screen shows up, the ipod shuts off. It does that over and over and over so its not even showing up in itunes.
I'm getting frustrated.Try to leave it connected for a while so that the battery can fill in without any request of power.
-
I just got an iPhone 5S, now when I try to use my old iPad the apps won't work because they are syncing with my new phone. Can I have the same account for an old iPad and a new iPhone?
Connect your iPad to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?
No. It sounds like the water destroyed the component inside the iPod.
About your only choice now it to take it to Apple and pay for a replacement.
Allan -
I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?
Can't you try the email option instead?
-
my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes
OK, and when you searched for information on iPhone error 4005 what did you find?
-
I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?
Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost -
how do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?
Remove all current Adobe software. Download Adobe Cleaner Follow instructions.
-
I installed ADE and when I try to download ebook it tries to open with Adobe reader and does not give option to open with ADE
It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this. -
My ipod wont update when i try to update it and it says my network always times out and i get error 3259 i need some to help me please. I have also updated itunes several times but it still fails.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i have an ipod touch 4g with 8gb but it is stuck in recovery mode and when i try to restore it an error pops up saying that the ipod ipod can not be restored then the number 1604 pops up how do i fix it
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1604 -
This happens quite often. I "x" out the browser when I am at a banking site, etc and when I try to re-open Firefox the message clearly states: "Firefox is already running and you must close it before you can open a browser and/or you must re-start your system." This error surely must appear on others attempting the same thing.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
I recently downloaded the latest version of Adobe Reader for my MacBook Air and now when I try to open a new pdf I get the Adobe logo and text in Japanese and nothing else. The pdf doesn't open. Any suggestions? I never had this problem until my cache was cleared and I had to re-install Adobe Reader. Any help would be appreciated.
Just to say I am having exactly the same issue on my MacBook Air. I can't remember what I did but after this happened a few times, and once I had clicked on the Japanese pop up, I managed to do something that now means I get the pop up in English, saying 'Adobe Reader blocked for this website'. When I click on it it asks me to trust the content and then I get a bar with the text in Japanese. Eventually the pdf does open. However it's very irritating that I have to trust every pdf individually which I never had to do before the latest upgrade, and I don't understand why I get messages in Japanese. I will be interested to see whatever answers other more technical people may provide!
Maybe you are looking for
-
Dimension/Porject wise balance sheet
Dear all, I would like to know whether it is possible to get Dimension/Project wise balance sheet as we are getting P/L and T.B.? If yes pls let me knw hw to proceed. SAP Ver: SAP B One 2005 B(7.40.243) SP:00 Pl:05 Rgds swapnil Edited by: Marc Riar o
-
Dear All, I have assigned safety permit to maintenance order. Now I want to take print out of safety permit(created in IPMD) as soon as order is released. I asked my ABAPer to develop a smartform so that that can be taken as output for printing. But
-
New Macbook pro is slowing down.any ideas why?
Hi There, I bought a macbook pro last July and in the last week I have noticed it slowing down, loading webpages takes longer etc.... I updated to yosemite recently but I am not sure that is the issue. Could it be something to do with cache, someone
-
Installed new HD, but Windows won't load
Hello, My uncle has a HP Pavilion G7-1329WM. The hard drive crashed, so I installed a new one. When I try to install Windows with the the Windows 7 dvd, I get the following message "No device drivers were found. Make sure that the installation medi
-
I'm doing a project in iMovie where I need to add video and photos to a song... however, there doesn't seem to be a way to import the audio to the project FIRST . . I need for the entire song to be in the project so I can determine where to add whi