I just got my MIDI to USB cable, fired up Garageband. I clicked the basic lessons, tried Play. But the lesson guy is playing. I'm the one who needs the practice.
I just got my MIDI to USB cable, fired up Garageband. I clicked the basic lessons, tried Play. But the lesson guy is playing. I'm the one who needs the practice, not him. Please help. I don't know what I'm doing.
G35Guy:
Well, if that's the case, you must have a different finish on yours than I have on mine. Either that or you are extrordinarily careful when using it. Mine literally scratches when using a microfibre cloth. I would really like to know whether yours is somehow different. It would really piss me of if some people got a good quality exterior that doesn't scratch and some of us got the opposite. Did you try holding your player under a light to see if there is anything. You may just be looking at it in bad lighting. I find it hard to believe, unless your unit has a different type of plastic cover, that it hasn't received any type of scratches. Can you take a picture of it's It probably seems as though I don't believe you. That's not the case. Its just that I was so careful not to scratch it last night and it got scratched anyway. I have read of similar experiences by others who have the Vision:M as well.
I wish I could return mine and get a different color, it really upsets me that a $300 item that is meant to be hand held and used heavily scratches this easily!! If anyone from creative is reading this, I would like to know what you plan to do about it! I didn't pay all of that money to have this player look like Sh*t when I am only using it the way it was intended and am being very careful at that!
John
Similar Messages
-
i got the iphone 5 today and plugged it into my laptop to look on itunes and buy some apps. i done this and disconnected my phone from my laptop however the screen is just coming up with a usb cable pointing to an itunes logo and wont go off? iv tried everything and it wont go back to the orginal home screen, just keeps coming up with the usb cable pointing to the itunes logo. please can some one give me advise as iv only just got it today
it has been into recovery mode. connecting to itunes will solve your problem. if it didnt work connect it itunes and restore your iphone.
-
I'm using an iPad camera connection kit and a MIDI to USB cable to interface a MIDI keyboard with GarageBand. It works flawlessly... until I use the sustain pedal. Once the pedal is depressed while playing a given note, from then on, the pedal itself plays the note every time it is depressed. It's not the keyboard or the pedal. I've tried others. That leaves the app or the connection between the iPad and the keyboard. I find it hard to believe I'm the only person who is experiencing this problem. Anyone have a fix?
Yes. There are a ton of write-ups on how to do the connections. I connect my m-audio Keystation 61 es through the CCK to my iPad and use GarageBand to control it. Some keyboards require a powered USB hub to make things work. I use a belkin 4 port hub in my own setup. Here is a link to tested / verified keyboards that work via the CCK: http://iosmidi.com/devices/
Hth -
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
Hi, I just got an iPod Nano 1st generation and I plugged it into my computer and open iTunes but it never showed up in iTunes. So then I updated my iTunes to the latest version but it still didn't show up so is there a way you all can help me A.S.AP.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@
This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/ -
Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!
Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214 -
when ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?
You may need to connect the iPod in Recovery Mode and then restore it via iTunes. See this article for instructions on getting your iPod into Recovery Mode.;
http://support.apple.com/kb/ht1808
B-rock -
I've just got iPod nano and I don't hear a sound. I've changed deferent earphone, but nothing works. What could be the problem?
Hi there Jasmine1243,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W. -
I have a very old G4 that I use for ProTools. I just bought a slightly newer G4 and I want to find out if it is possible to transfer my old OS 10.2.8 system from one computer to the other so I can run my old ProTools system without a hitch. I would rather not buy the old 10.2.8 system as it is expensive. Thanks!
Need to know which newer one, some cannot run 10.2.x.
One solution might be to clone the 10.2.8 Drive to another drive, then Install a later OS on it Preserving Users & Settings.
Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
Relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
HT201272 wait just to be sure i am not the only one who has the "term and conditions" problem
wait just to be sure i am not the only one who has the "term and conditions" problem
Go to Crucial.com and use one of their two methods to determine what upgrades are available for your Mac:
I would purchase the modules from Crucial as they are very reliable and wiill work with you if you have problems.
OT -
I just bought a nano and am trying to sync to itune on my mac. It tells me I need the latest version of itune. When I try to download this it tells me I need a new OS. I have updated both and my nano still will not sync. Any suggestions?
Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
Trouble installing Photoshop CS2
My name is Michael and I work for the U.S. Navy on board the USS Emory S Land. My command bought my shop a new computer recently that is used strictly for desktop publishing and video editing projects. This means it has NO internet connectivity. I
-
Apple Configurator Device Backup Not Working - HELP ASAP Please
Hey Everyone! We are trying to backup one iPad so we can take that backup and add it to all of our other iPads.... In Apple Configurator I've added all of the apps, setup a profile, etc. On PREPARE, At the top I go to DEVICES and click on BACKUP. It
-
How can i retrive my back up data
I finally updated my IPod touch after a few years. Prior to downloading, a window popped up saying I can download the update to my computer so I dont lose my content.Well that I never got the option, it went right into "Backing up my IPod" so I figur
-
No se ha podido descargar la aplicación
No se me cargan la aplicaciones compradas en mi MAC...¿Qué hacer?
-
Y must I trash prefs EVERY TIME 2 use FCP 5.04???
When I try to run FCP 5.04, it will try to start and then quit. It will only load if I trash my prefs. I must do this everytime in order for the program to start. I recently upgraded from Tiger on a MDD G4 to Leopard on a 2.8 Dual Quad. I cloned the