I just got my new Mac Pro and can't seem to connect to my HP6380 printer. Any suggestions?
I
go into printer preferences and try adding it (the little plus sign on the bottom)
I don't know how you have it connected, so I can't offer any specific advice, also, check HP's website for any updated drivers, or run Software update to see if some have already been released
hope this helps
John B
Similar Messages
-
Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password. I want to start over and I can't even get back in to do this bc it won't take any of my passwords. How can I start over completely?
You got a new laptop? try asking there or in Lion forum.
If it has Lion, use the Recovery Mode boot Command-R
Use that to erase and reinstall - it has network install ability.
Want MacBook Pro forum or Lion Community?
MacBook Pro
Lion Mac OS X Communities
New, as in from Apple, it would have asked for full setup.
Want to reset the password? (it is used then I'd wipe it clean and start over)
How to run the Password Reset utility in OS X 10.7 Lion -
I just got a new Mac yesterday and I am trying to connect my Logitech headset for work but can't! I plug it into the USB but nothing pops up and I can't find where I go to look to see if it's connected. HELP!
Ask the Verizon store to exchange your iPhone for a different iPhone 4.
UPDATE - Sure, try ckuan's solution first. Then use mine if that fails.
Message was edited by: sberman -
hi i just bought the macbook pro and i wanted to know how i can transfer all my music on itunes from my old desktop to my new macbook?
Derek's right. To explain his second point more, you can mount your old Mac's hard drive on your new one and once you've done this you can simply drag your music folder over.
You can mount various ways, if you have a router and both are on your LAN network I believe u use the Go menu in your new Mac to mount your old one.
You can also use a cable directly between the two. I did this years agonwith ethernet but I bet USB or even FireWire is possible.
Once you get your music copied over, you may need to add your music into your Mac's iTunes.
Open iTunes and then select Add to Library and then find your music folder to add. You can add single songs or folders of songs or your entire folder of all songs. -
Hi...please help me. I just got a Mac Pro yesterday and did not set up a password at apple now it is asking me for one to download flash player plug in. what can i do?
Shootist007 wrote:
You must of set a password on the computer when you kfirst turned it on. Otherwise you wouldn't be using it.
What I think you are talking about is a user name and password for an Apple ID.
Apple IDs use a email address and a password you create for that email address on Apples website.
There should be a link on whatever page you are on to Create an Apple ID. Click that link.
Or just open App Store from the link on you Dock then Find the link to create an Apple ID.
Absolutely not. You can create a blank password. Yes it's stupid. Yes it's unsafe. But from helping people with their Macs, I find most do not set up a password. <facepalm> -
I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?
You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion -
I just got a new macbook pro and transferred everything from my old macbook. My photos show up as thumbnails in iphoto, but if I click on them, a "?" pops up for all of them!
Copy the Library over manually.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
i just got a new macbook pro and did migration from my old computer. transferred everything except my iPhoto! now it prompts me to choose a library, but its all blank? help!
Copy the Library over manually.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
Just got a new mac mini and I can't figure out how to authorize it. Help!
Just got a new mac mini and cannot figure out how to authorize it. Help!
mLink your phone number and Apple ID for use with FaceTime and iMessage
-
I have just got a new macbook pro and want my itunes library on it.
hi, i have just got a new macbook pro and set it all up apart from my itunes library. yesturday i tried plugging in my ipad and iphone but this didnt work. i have tried clicking homeshare and have it turned on on both of my laptops but my itunes library has not synced. how do i transfer my itunes library?
MissGraceB wrote:
... how do i transfer my itunes library?
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html -
I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?
Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD -
I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much
How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).
-
Daughter's homework assignment needs adobe flash plug in. Just got my new MacBook Pro and scare to download program if it compromises the security of laptop. What do I do in this situation?
OS X will automatically block versions of Flash that are known to be unsafe. As long as Flash is kept up to date, it's reasonably safe. You can minimize your exposure to Flash content by installing the "ClickToFlash" or "ClickToPlugin" Safari extension. Flash elements will then load only when clicked.
-
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
-
I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.
What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine
Maybe you are looking for
-
IPhone no longer shows up in iPhoto after iTunes update
I took some photos with my iPhone 3G today. iPhoto launched when I attached the iPhone (USB) but it no longer appears in the sidebar and so I cannot download the photos. It worked perfectly 3 days ago. The only system change is that I updated iTunes
-
Zoom level when opening a pdf in Preview from a Finder "find" window
I do a Finder search, and the search window shows a bunch of pdf files. If I double click on one, it opens in Preview with the Finder search term highlighted in the pdf text-very nice. But the zoom level of the pdf is very high, like 300%. So I alway
-
Do the photos stay in aperture?
Hello, a dumb question probably. I imported some photos into aperture on my imac and am delighted to see they have appeared on my macbook. A couple of questions. Can I choose some older photos from my library to do this? Are the ones that have downlo
-
PDF preview and display issue : NWDS CE 7.1 SP05+ALD 7.1
Hi All I am creating a webdynpro java application in NWDS 7.1 SP 05. This application has an interactive form ui element. The livecycle designer version is 7.1 and reader versions tried are 8 and 9. The issue is that the pdf preview in NWDS is blank
-
Best way to read a CSV file into an internal table
Hi, I have a comma seprated file, which I need to read into an internal table, and be able to look at particular values - basically looping round and populating BDC fields. Whats the easiest way of doing this?