I just got v10.6, while trying to run the update, it's telling me that the file is corrupt and cannot be saved. What do I do?!

I'm running Snow Leopard v 10.6 on a Macbook 4,1. I've got a 500 GB HD and 4GB of Ram. While trying to run the software update (to get me to 10.6.8, I think?) I keep getting an error message around 600 MB that says it's unable to be saved because the file might be corrupt and that it will try again when the software update is ran next time. Why am I getting this message? Is there a way to get the update (so I can eventually get to Lion), without going through the software update screen?
I'm going crazy with this. I've tried 4 times now and still keep getting the same message.

Try downloading the stand alone installer here:
http://support.apple.com/kb/DL1399
In Safari Preferences, General tab, set "Save downloaded files to: select destop, if it is not in thed rop down select other, then selcet Desktop from the left sidebar. After the download completes click on the installer package on your desktop and follow the prompts.
Also if possible use an ethernet conection as it is less prone to interference, thus less prone to corruption, and usually faster.
Hope this helps

Similar Messages

Getting an error msg while trying to run the java class from CMC

Hi All,
I am getting an error, while trying to run the java .class file, that which is imoported into CMC.
Error msg:
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at com.crystaldecisions.sdk.plugin.desktop.program.internal.ProgramWrapper.main(ProgramWrapper.java:49)
I have imported .class file into CMC and trying to invoke the .class file by another java program from eclipse..When i tried to invoke the .class in cmc, i am getting an error msg, mentioned above. I thought there might be version conflict. So i changed the java complier version to 1.5 in my Eclipse. After that is done again i am facing the same problem.
Can anyone help me to resolve this issue?
Thanks in Advance.

i have installed BO SDK 3.1 , Service pack 3. It comes woth JDK 1.5 version. i have not done any chnages to it. I impoprted all the jar files related to BO into eclipse.
1) Actually, i am writing java code on eclipse. When i run code from the eclipse, it creates a session to cmc and creates folder structure what i need.
2) But the thing is, that code needs to run, when i import the .class file into cmc. The process how i imported the .class file to cmc.
Manage> Add> Program File-->Java (Check Box). In this way i added java class file from the eclipse workspace (class file from the bin directory).
3) So when i run the .class file externally by another java program or also when i log in to CMC and run that .class file, the instance shows sucess, but when i see the logfile i am getting an exception that which i mentioned above.
If my method is worng can you please let me know the stepts how to run java program in cmc.
Thanks in Advance

I recently purchased an upgrade to Photoshop CS6. (Dec 9 2014). I have today downloaded the file (Photoshop_13_LS16.7z This downloaded OK When I tried to run the file (Winzip) I got the following message "Installer failed to initialise. Could be due

I recently purchased an upgrade to Photoshop CS6. (Dec 9 2014). I have today downloaded the file (Photoshop_13_LS16.7z
This downloaded OK
When I tried to run the file (Winzip) I got the following message
"Installer failed to initialise. Could be due to a missing file. Please download Abobe support adviser."
I tried to do that and it told me Adobe support adviser no longer exists.
Could you please advise a solution.

Extract it to a different location inside a dedicated folder and make sure to not destroy the file and folder hierarchy inside the archive. also run the install with sufficient user privielges and security stuff turned off.
Mylenium

When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

When i try to convert from PDF to word it says "an error occurred while trying to access the system". I've paid for this what is going on?!

Hi,
I have the same problem. Here is the screenshot of the error and I am using Windows 7 and Adobe Reader XI version 11.0.10.

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
When I downloaded the files from the website, these are the files that downloaded:
I double-clicked each one and they extracted into two different folders.
Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
So then I double clicked the "Setup" file and I got this error message:
So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
But then I got this error message, even though I was using the files and serial number exactly from the website:
I tried both photoshop and illustrator and the same thing happened.
(I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
Thank you very much!

I'm trying to download Mozilla Firefox, but everytime I try, the download is interrupted by a prompt stating the file is corrupted and it stops the download. Help!

I'm currently using Internet Explorer and it is SO slow. I went to this site and tried to download Mozilla Firefox. It begins to download and then is interrupted by a window that pops up and says the file is corrupted and it shuts down the entire download. This has happened about five times. Please help!

The Mozilla site. It's the correct site, I'm sure of it. I'm becoming EXTREMELY irritated with Internet Explorer and haven't even been able to really use the internet on my own laptop because of how many problems I have with IE. I've tried NUMEROUS times a day to download Mozilla Firefox and the SAME thing keeps happening. It'll get to about 3% loaded and say it's an Unknown Publisher and I tell it to run anyway and then immediately after that, it says "Extraction Failed: File Corrupt" and the download stops. PLEASE HELP. PLEASE.

Error while trying to run the Crystal Report ADD ON on SAP 8.8 Patch 12

Hello Expert,
I have installed Crystal addon version 2.0.07 on SAP 8.8 P12.While trying to start the crystal addon I am getting the following error.
"External connection to DB Failed.Please re-run the account setup with super user login."
regards,
pankajk

Hi Gordon,
I am unable to see the crystal manager in the menu after the installation of SAP 8.8.Only at the Tool there is Preview for th external crystal report.How to visualize the cyrstal report manager in SAP 8.8.
regards,
pankajk

I purchased the Adobe PDF Pack but it won't allow me to convert any files to pdf or combine multiple files to into 1 pdf form. It keeps saying "Error occurred while trying to access the file". WHY

I purchased the Adobe PDF Pack for $7.50/month (or $89.99/yr) but it won't allow me to convert any files to pdf or combine multiple files into 1 pdf form. It keeps saying "An error occurred while trying to access the service". WHY is this happening & How can I fix it?

Hi hpmg,
It seems you are trying to access the service via Adobe Reader. Make sure you are signed in with your Adobe ID. Is Reader updated to the latest patch v 11.0.09?
It might be possible that a firewall or antivirus might be breaking the connectivity from Reader to the server.
Try accessing the service from the browser: https://cloud.acrobat.com/exportpdf and check if that works for you.
Regards,
Rave

Tomcat error while trying to run the servlet

I am etting the below error while trying to run a servlet from tomcat server.
HTTP Status 404 - /servlet/DailyStatusServlet
type Status report
message /servlet/DailyStatusServlet
description The requested resource (/servlet/DailyStatusServlet) is not available.
Can anyone help me in solving this error.

rnaaz wrote:
Can anyone help me in solving this error.Start by making sure you've properly mapped that URL in your deployment descriptor (web.xml file).
~

Error message while trying to run combo update

I get the following error message when trying to run the combo update.
"You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
I tried with both 10.5.7 and 10.5.8 and I get the same message.
Any suggestions?

1. Be sure you have downloaded the 10.5.8 Combo Installer.
2. Verify that you have 10.5.x installed by opening About this Mac from the Apple menu. The installed version should be displayed.
3. Do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

When trying to download Firefox 3.6, just before finishing I get a message that says the file is corrupted and won't let me knownload

I'm trying to download firefox 3.6 and get a message saying the file is corrupted, or doesn't have authentication. What's up?

Hi,
I think there are some internet problems. If you use a (wireless)-router, maybe a reset will work. You can reset the router by pressing a button on the router itself. Try again downloading firefox.
If this doesn't work, download firefox from another computer and safe it on a USB flash drive.
Kind regards,
Joren

I keep getting a message that itunes incorrectly tried to run the C runtime library and now itunes won't work anyone know how to fix it?

My computer keeps telling me that itunes tried to incorrectly run the C runtime library and now I can't get into it, I've tried uninstalling and reinstalling it but nothing is working

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Console error messages every time while trying to run Software Update

Trying to check for updates and I get this message in console:
com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [774] for authorization created by '/System/Library/CoreServices/Software Update.app' [768]
I have not had any updates in a while, so I am thinking because of this.
Anyone see a problem.
Thanks
Running Lion 10.7.1

From here: (by bengliang )
LONG STORY SHORT, delete all the files in /Users/<yourusername>/Library/Caches/com.apple.SoftwareUpdate/ and then retry Software Update and it should work!

Runtime Error while trying to run the Requestor ABCS Process

Hi Everyone,
I'm currently working on POC to Query Customer using AIA.
Created Target Service which is Composite BPEL process to Query the data from the E-Business Suite.
Deploy the the same to SOA and AIA MDS.
Created Provider ABCS and deployed the same on SOA and MDS.Tested partial flow and it works as expected.
Then Created EBS Using Mediator and deployed on SOAand MDS and tested the same and it works
Created Requestor ABCS with custom ABM xsd which has customerID as i/p and deployed the process on SOA and registered it on the AIA MDS as well.
But at Runtime it gives an error saying it is unable to find the EBM Header information.
AIAConfigurationFile has the default systemID mentioned.Has anyone encountered this issue.
Is there anything else which needs to be done ?
Please see the error for your reference. Input from the ABM is just CustomerID.
empty variable/expression result.
The XPath variable or expression /customerpartyebo:QueryCustomerPartyEBM/corecom:EBMHeader is empty at line 562.
An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data.
Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related variables to ensure the run-time data is valid.
AIAConfigurationProperties File
<ServiceConfiguration serviceName="{http://xmlns.oracle.com/ABCSImpl/QCD/Core/QueryCustomerQCDReqABCSImpl/V1.0}QueryCustomerQCDReqABCSImpl">
<Property name="TRACE.LOG.ENABLED">true</Property>
<Property name="Default.SystemID">XXX_XXX_QCD_01</Property>
<Property name="Routing.CustomerPartyEBS.QueryCustomerParty.RouteToCAVS">false</Property>
<Property name="Routing.CustomerPartyEBS.QueryCustomerParty.MessageProcessingInstruction.EnvironmentCode">PRODUCTION</Property>
<Property name="Routing.CustomerPartyEBS.QueryCustomerParty.CAVS.EndpointURI">http://localhost:8001/AIAValidationSystemServlet/syncresponsesimulator</Property>
</ServiceConfiguration>
Any suggestion or help would be appreciated.. I need this up and running at the earliest.
Regards
Sabir
Edited by: sabir on Aug 31, 2010 6:30 PM

<xsl:template match="/">
<customerpartyebo:QueryCustomerPartyEBM>
     

     <xsl:call-template name="EBMHeader">
          <xsl:with-param name="BusinessScopeIDPath" select="/tnsabo:CustomerReqMsg/tnsabo:ID"/>
          <xsl:with-param name="IntegrationScenarioName" select="'Customer Query - '"/>
     </xsl:call-template>
<customerpartyebo:DataArea>
<corecom:Query/>
<xsl:attribute name="listID">
<xsl:value-of select="/tnsabo:CustomerReqMsg/tnsabo:ID"/>
</xsl:attribute>
     </customerpartyebo:DataArea>
</customerpartyebo:QueryCustomerPartyEBM>
</xsl:template>
I get the following error
XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_CustomerABMReqMsg_to_CustomerPartyEBMReqMsg.xsl',bpws:getVariableData('QueryCustomerReqMsg','QueryCustomer')). The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 113, Column 123>: XML-22036: (Error) Cannot convert result tree fragment to NodeSet.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary>
</part>
<part name="code">

Error while trying to run the SimpleQueueSender from the JMS tutorial

I have j2sdkee1.3 and j2sdk1.4.2_16. While running the program SimpleQueueSender from the the JMS tutorials,
I am getting this error.
Queue name is MyQueue
JNDI API lookup failed: javax.naming.CommunicationException: java.rmi.MarshalExc
eption: CORBA MARSHAL 1398079699 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Mis
matched serialization UIDs : Source (Rep. IDRMI:com.sun.enterprise.jms.Connectio
nFactoryWrapperStandalone:98F786F596CFC210:25708D070B9BE261) = 25708D070B9BE261
whereas Target (Rep. ID RMI:com.sun.enterprise.jms.ConnectionFactoryWrapperStand
alone:98F786F596CFC210:9AF5BC4828398A2D) = 9AF5BC4828398A2D vmcid: SUN minor c
ode: 211 completed: Maybe
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
n(ShutdownUtilDelegate.java:100)
Please help.

Looks like classpath problem.
Please punch in more details,

I just got v10.6, while trying to run the update, it's telling me that the file is corrupt and cannot be saved. What do I do?!

Similar Messages

Maybe you are looking for